United States Nuclear Regulatory Commission (U.S. NRC) specifies regulations on obtaining licenses and describes the technical position on the average waste concentration, also known as Concentration Averaging and Encapsulation Branch Technical Position (CA BTP); CA BTP helps classify blendable waste and discrete items and address concentration averaging. The technical position details are reviewed and compared in a real environment in Korea. A few cases of concentration averaging based on the application of CA BTP to domestic radioactive waste are presented, and the feasibility of the application is assessed. The radioactive waste considered herein does not satisfy the Disposal Concentration Limit (DCL) of the second-phase disposal facility while applying the preliminary classification. However, if CA BTP is applied when the radioactive waste is mixed with other radioactive waste items in a large and heavy container, it can be disposed of at the second-phase disposal facility in Gyeongju Repository. To apply the CA BTP of the U.S. NRC, it is necessary to investigate the safety assessment conditions of the US and Korea.

Peri-implantitis is a disease affecting the tissue surrounding dental implants, destroying both soft and hard tissues. A total of 2,015 studies were collected by searching items in the National Library of Medicine, including keywords, such as “peri-implantitis,” “microbiota,” and “microbiome.” Of them, 62 studies were screened and considered eligible for analysis. Only 16 studies qualified all criteria mentioned here: “Using PCR methods for microorganism detection,” “Suggesting quantified results,” “Stating obvious clinical diagnosis criteria (“Bleeding on probing,” “Probing pocket depth,” “Suppuration,” and “Radiographic bone loss”).” Only 8 studies were included in the meta-analysis because the others had special issues. Porphyromonas gingivalis , Tannerella forsythia , Treponema denticola , Aggregatibacter actinomycetemcomitans, Prevotella intermedia , and Epstein-Barr virus were the microbiological subjects of analysis. The odds ratio (OR) between the healthy implants and peri-implantitis were calculated for each microorganism to compare two groups, and the forest plots were suggested as the visual materials. P. gingivalis (1.392 < OR < 2.841), T. forsythia (1.345 < OR < 3.221), T. denticola (2.180 < OR < 5.150), A. actinomycetemcomitans (1.975 < OR < 6.456), P. intermedia (1.245 < OR < 3.612), and Epstein-Barr virus (1.995 < OR < 9.383). The species showed that their 95% confidence interval of odds ratio was higher than 1, indicating that they were detected more frequently in periimplantitis than in healthy implants. Meanwhile, other species, such as Fusobacterium nucleatum and Staphylococcus aureus, were not included in the meta-analysis because the number of studies was insufficient.

The global PC game market is enjoying sustainable growth, and diverse grow types and quantities of games. Among the many, the theme of horror circulates in the market. Ahead of placing orders, the poster initiates the first exchange with the game, players and consumers, and affects buyers' behavior and cognition subject to its color. What is an eye-catching poster? Different games have different styles and philosophies, so it leads to a certain degree of variation in the poster design of each game. In order to study the common points of popular game color design. For the top 10 most acclaimed horror games on STEAM (PC), 5 to 6 color elements were mined from each poster for analysis and offered suggestions on poster design. First, in the color selection, more warm colors are on the list of recommendation, such as yellow, you can also choose cool colors such as blue. Second, high-saturation and high-brightness colors speak for better choice. The design of color is not absolute, and this thesis only analyzes the posters of commercially circulated and well-received horror games. It is hoped to provide insights for user-friendly interface design, support and understanding of user behaviors.

The emergence of Mo2C- based catalysts in recent years has been favored as promising contender within diverse class MXenes. In terms of rapid development in the photocatalytic application, these intriguing compounds exhibit excellent photocatalytic performance because of their superior optical properties and peculiar structure characteristics. Unfortunately, a systematic review of Mo2C- based catalysts is lacking. In this review, we abstract the implication of structure—property relationship of emerging Mo2C- based MXenes materials and their applications toward the photocatalytic hydrogen evolution reaction (HER). Furthermore, synthetic pathways to prepare high-quality, low cost Mo2C- based MXenes materials and their outcomes for high HER applications are systematically described. Finally, several insights are provided into the prospects and future challenges for the development of highly reactive Mo2C- based MXenes materials, which present large range opportunities in this promising 2D materials for green and clean energy in environmental fields. This review provides a comprehensive scientific guide to the preparation, modification, and photocatalytic HER of MXenes-based materials.

Amorphous molybdenum sulfide ( MoSx) has been regarded as a promising hydrogen evolution reaction (HER) catalyst due to its mild preparation conditions and low-cost precursor materials. In this work, we report a simple strategy combining the growth of amorphous MoSx on the surface of metal organic frameworks (ZIF-67) and annealing treatment to prepare Co-doped MoSx nanopolyhedrons (denoted as CoMoSx NPs). The CoMoSx NPs exhibit excellent HER activity in acid condition with an overpotential of 188 mV at a current density of 10 mA cm− 2 (η10), and a relatively stable overpotential after 2000 cyclic voltammetry (CV) cycles testing. The excellent HER performance of the CoMoSx NPs can be attributed to the doping of Co element adjust the electronic structure and increase the conductivity of catalyst, and the nanopolyhedrons structure which can expose more active sites for HER electrocatalytic. This study offers a low-cost and simple strategy to prepare high-activity HER catalyst, which holds great promises in developing advanced electrocatalysts for energy storage.

Decabromodiphenyl ether (BDE209) is a persistent aromatic compound widely associated with environmental pollutants. Given its persistence and possible bioaccumulation, exploring a feasible technique to eradicate BDE209 efficiently is critical for today’s environmentally sustainable societies. Herein, an advanced nanocomposite is elaborately constructed, in which a large number of titanium dioxide ( TiO2) nanoparticles are anchored uniformly on two-dimensional graphene oxide (GO) nanosheets ( TiO2/GO) via a modified Hummer’s method and subsequent solvothermal treatment to achieve efficient photocatalytic degradation BDE209. The obtained TiO2/ GO photocatalyst has excellent photocatalytic due to the intense coupling between conductive GO nanosheets and TiO2 nanoparticles. Under the optimal photocatalytic degradation test conditions, the degradation efficiency of BDE209 is more than 90%. In addition, this study also provides an efficient route for designing highly active catalytic materials.

Reliable, inexpensive, environment-friendly, and durable properties of carbon materials with unique and outstanding photoelectric performance is highly desired for myriad of applications such as catalysis and energy storage. Since lattice modulation is a vital method of surface modification of materials, which form by an external force during the synthesis process, causing the internal compression and stretching, leading to lattice sliding event. In this review, we present a summary of different methods to tailor the lattice modulation in 2D carbon-based materials, including grain/twin boundary, lattice strain, lattice distortion, and lattice defects. This overview highlights the implication control of the diverse morphologies of nanocrystals and how to tailor the materials properties without adding any polymers. The improvement in the performance of 2D carbon materials ranges from the enhancement of charge transport and conductivity, structural stability, high-performance of light absorption capacity, and efficient selectivity promote the future prospect of 2D carbon materials broaden their applications in terms of energy conversion and storage. Finally, some perspectives are proposed on the future developments and challenges on 2D carbon materials towards energy storage applications.

The objective of this study was to explore the symbolism associated with phoenix patterns in China and the temporal aesthetic characteristics of these patterns found in Dunhuang Mogao Grottoes. The study involved collecting examples of clothing designs featuring phoenix patterns from China Fashion Week and the Vogue website, spanning from spring and summer of 2016 to fall and winter of 2022. After collecting and organizing these examples, representative cases were selected for analysis. The objective was to identify effective techniques for incorporating phoenix patterns within the context of Dunhuang Mogao Grottoes and provided insights for future clothing design and textile pattern design research. Phoenix patterns boasted a lengthy history and were laden with symbolic meaning. Early renditions of phoenix patterns found at Mogao Grottoes in Dunhuang were relatively simplistic in design, mainly employing elements like rhythm, coordination, balance and symmetry to convey a sense of nature and gravity. Over time, these patterns evolved under the influence of the prevailing cultural backdrop, employing repeated emphasis to portray notions of abundance and tenacity. Furthermore, regarding the use of phoenix patterns in clothing, there were four prevalent expression techniques: embroidery, beading, printing, and knitting. Traditional techniques like embroidery and beadwork often prioritized aesthetic features like coordination, emphasis, and symmetry, thereby showcasing the opulent characteristics of phoenix patterns. On the other hand, printing and knitting techniques used a single phoenix pattern or a modified version to simplify designs by emphasizing or repeating aesthetic characteristics while adhering to a modern artistic approach.

Background: In modern society, the use of computers accounts for a large proportion of our daily lives. Although substantial research is being actively conducted on musculoskeletal diseases resulting from computer use, there has been a recent surge in interest in improving the working environment for prevention. Objects: This study aimed to examine the effects of posture correction feedback (PCF) on changes in neck posture and muscle activation during computer typing. Methods: The participants performed a computer typing task in two sessions, each lasting 16 minutes. The participant’s dominant side was photographed and analyzed using ImageJ software to verify neck posture. Surface electromyography (EMG) was used to confirm the participant’s cervical erector spinae (CES) and upper trapezius muscle activities. The EMG signal was analyzed using the percentage of reference voluntary contraction and amplitude probability distribution function (APDF). In the second session, visual and auditory feedback for posture correction was provided if the neck was flexed by more than 15° in the initial position during computer typing. A 20-minute rest period was provided between the two sessions. Results: The neck angle (p = 0.014), CES muscle activity (p = 0.008), and APDF (p = 0.015) showed significant differences depending on the presence of the PCF. Furthermore, significant differences were observed regarding the CES muscle activity (p = 0.001) and APDF (p = 0.002) over time. Conclusion: Our study showed that the feedback system can correct poor posture and reduces unnecessary muscle activation during computer work. The improved neck posture and reduced CES muscle activity observed in this study suggest that neck pain can be prevented. Based on these results, we suggest that the PCF system can be used to prevent neck pain.

Background: Smartphone addiction has emerged as a significant social problem. Numerous studies have indicated the association between smartphone use and discomfort in the musculoskeletal system of the upper extremities. Objects: This cross-sectional survey aimed to compare the characteristics of musculoskeletal pain in the neck, trunk, and upper limbs between individuals with smartphone addiction and those without addiction. Methods: We collected a total of 326 healthy individuals’ data from China and Korea who had owned and used smartphones for more than 5 years between 20–50s through an online questionnaire consisting of 84 questions in four major sections. The first part contained basic information on the participant's personal characteristics and smartphones. The second part contained questions about smartphone use and posture. The third part was the smartphone addiction. The fourth part was to investigate musculoskeletal pain in various upper body parts. Results: Smartphone addiction has a weak negative correlation with age (r = –0.20, p < 0.01) and a weak positive correlation with the hours of smartphone use (r = 0.376, p < 0.01). Frequent musculoskeletal pain symptoms related to smartphone use were observed in the neck, shoulder, lower back, and wrists. The hours of smartphone use was slightly positively associated with the prevalence of musculoskeletal pain in the shoulder (r = 0.162, p < 0.05) and lower back (r = 0.125, p < 0.05). The prevalence of musculoskeletal pain in the neck (χ2 = 3.993, p < 0.05), shoulder (χ2 = 6.465, p < 0.05), and wrist (χ2 = 4.645, p < 0.05) was significantly higher among females than males. Conclusion: The results suggest that smartphone addiction should be recognized as a dual concern encompassing both physical health and psychosocial aspects. Furthermore, healthcare professionals, including physicians and physical therapists, should consider clients' smartphone usage patterns when assessing and treating with musculoskeletal pain.

Background: The elderly population is increasing rapidly worldwide. Muscle mass, usual walking speed (UWS), knee extension strength (KES), hand grip strength (HGS), peak expiratory flow (PEF), and depression is used for sarcopenia diagnosis. All four of these factors (KES, HGS, PEF, and depression) correlated with UWS and also to muscle mass. But, many studies have suggested that no correlation exists between muscle mass and UWS. Objects: This study aimed: 1) to investigate whether muscle mass reduction affected UWS, as mediated by KES, HGS, PEF and depression, and 2) to explored whether significant changes in these mediators varied by the body segment in which muscle mass evaluated in elderly female aged 65–80 years. Methods: A total of 100 female aged 65–80 years were surveyed. Muscle mass was measured by body segment (upper and lower segment), and KES, HGS, PEF, depression, and UWS were also assessed. Median analyses were progressed in IBM SPSS software (ver. 23.0, IBM Co.) using a downloaded INDIRECT macro. Results: The direct effect of the KES and PEF were significant, and the indirect effect of KES and PEF were not significant. Thus, KES and PEF served as full mediators of the effect of muscle mass on UWS. Regardless of bodily region, KES and PEF combined with muscle mass were significant mediators of UWS, with similar indirect effect sizes. Conclusion: KES and PEF are the only mediators regardless of body part. Therefore, mediating the KES and PEF may prevent sarcopenia progression in elderly female. Also, sarcopenia can be readily assessed by evaluating either the upper or lower body; it is not necessary to measure total muscle mass.

Background: Office workers experience neck or back pain due to poor posture, such as flexed head and forward head posture, during long-term sedentary work. Posture correction is used to reduce pain caused by poor posture and ensures proper alignment of the body. Several assistive devices have been developed to assist in maintaining an ideal posture; however, there are limitations in practical use due to vast size, unproven long-term effects or inconsistency of maintaining posture alignment. We developed a headphone and necklace posture correction system (HANPCS) for posture correction using an inertial measurement unit (IMU) sensor that provides visual or auditory feedback. Objects: To demonstrate the test-retest reliability and concurrent validity of neck and upper trunk flexion measurements using a HANPCS, compared with a three-dimensional motion analysis system (3DMAS). Methods: Twenty-nine participants were included in this study. The HANPCS was applied to each participant. The angle for each action was measured simultaneously using the HANPCS and 3DMAS. The data were analyzed using the intraclass correlation coefficient (ICC) = [3,3] with 95% confidence intervals (CIs). Results: The angular measurements of the HANPCS for neck and upper trunk flexions showed high intra- (ICC = 0.954–0.971) and inter-day (ICC = 0.865–0.937) values, standard error of measurement (SEM) values (1.05°–2.04°), and minimal detectable change (MDC) values (2.92°–5.65°). Also, the angular measurements between the HANPCS and 3DMAS had excellent ICC values (> 0.90) for all sessions, which indicates high concurrent validity. Conclusion: Our study demonstrates that the HANPCS is as accurate in measuring angle as the gold standard, 3DMAS. Therefore, the HANPCS is reliable and valid because of its angular measurement reliability and validity.

This paper explores the relationships of various cognitive, attitudinal, and behavioural responses of e-discount sales promotion technique preferences consumers have when making purchases through online food delivery services (OFDS). This paper highlights new findings towards expanding e-discount and sales promotion literature and thus provide relevant implications.

Previous studies offered inconsistent empirical results for the influence of customer participation on service satisfaction. One possible explanation for this inconsistency is that existing conceptualizations of customer participation do not clearly differentiate the distinct roles of customer participation in service. To address this gap, Dong and Sivakumar (2015) have proposed an updated classification for customer participation based on “output specificity,” which refers to the degree to that the nature of the output is influenced by the person who provides the resource. The output of the customer participation can either be “specific” or “generic”. The “specific output” is defined as the expected service outcome can be idiosyncratic depending on whether the service is provided by the customer or the employee. In contrast, “generic output” refers to expected service outcome is well defined regardless of whether it is delivered by the service provider or the customer. How output specificity of customer participation influences service satisfaction still lacks of empirical examination.

Using a tablet (versus a mouse) when shopping online has been shown to increase a shopper’s overall preference. Three studies demonstrate that this effect is robust across various contexts. We hypothesize that consumers will like the products they explore on touch devices (e.g., tablets) because they can more easily imagine using the products (Shen et al., 2016). When given the opportunity to explore the items on the touch devices, even utilitarian products and that this effect will be robust across different contexts.

This research investigated the effects of para-social interaction (PSI) in online and traditional celebrity endorsements. The data was collected by distributing questionnaire sets. And covariance structural equation modeling was used to analyze the model. The findings showed that para-social interaction is the moderator variable in the online celebrity endorsement effect.