We analyzed the current status of the telescope control system (TCS2) of the 1.8 m telescope in Bohyunsan Optical Astronomy Observatory (BOAO), and suggest a new TCS (TCS3) for the long term development of BOAO. The TCS2 was constructed in 1998 to replace the TCS1 which was installed with the telescope itself at the commencement of BOAO. One of the important parts of TCS is PMAC (Programmable Multi-Axis Controller), which is a general-purpose multi-axis motion controller. PMAC provides the direct interactive communication environment permitting users to command the controller directly with simple operations. This makes the setup, debugging, and diagnostics very easy. The TCS2 was operated stable for a long time, but the hardware and TCS computers have been deteriorated and are out of date now. The new TCS3 needs to be constructed based on a modern computer system. And functions such as pre-calculations of telescope limiting position, interworking with virtual observatory tools, and using GUI, etc should be added. Construction of the TCS3 will be a step creating a better observation environment for the Korean astronomical society.

The characteristics of the BOES (Bohyunsan Observatory Echelle Spectrograph) CCD camera is presented. In order to get optimum gain and readout noise of the CCD, we examine the variation of the gain and readout noise by changing the value of output drain voltage of the CCD and measuring the gain using transfer curve, which is defined as the plot of variance versus mean exposure level of a homogeneous light onto the CCD surface. The gain and readout noises are optimised to be 0.5e −/ADU and 3e−, which is good for highest signal-to-noise ratio and contrast for the low light level characteristics of the BOES. We also measure the dark count of the CCD by getting five dark images with 3600 seconds exposure time. The mean dark count from median stacked dark images is essentially zero. A table of positions of defected pixels is also presented.

A CCD camera for the BOES (Bohyunsan Observatory Echelle Spectrograph) has been developed. The camera consists of a 2048 × 4096 format CCD, a SDSU Gen-I CCD controller, and a continuous flow cryostat (CFC) designed by the ESO. In order to control the CCD under SDSU Gen-I controller, the voltage level of all the biases and clocks were lowered by -6V. The CFC showed cooling time of about 10 hour, after which the chip temperature settled down with variation less than ±1°C. The final chip temperature is around -105 °C with the setting value for the CFC as -170 °C