The state variables of saturated and superheated region in the steam table were simultaneously modeled using the neural networks. And the results were compared with quadratic spline interpolation and Lagrange interpolation. Two input data without distinguishing parameter were used in the neural networks. For comparison, quadratic spline interpolation method for superheated region and Lagrange interpolation method for saturated region were applied. The overall results revealed that the neural networks were greatly superior to quadratic interpolation method or Lagrange interpolation method.

In this paper, research development about a bladder press forming system has been carried out for sheet metal forming. The bladder press forming system consists largely of three units as follows forming process unit, driving unit and hydraulic power unit including bladder. Structural analysis of frame of total system by the ANSYS program, flow analysis of bladder by CFX version 14 and hydraulic circuit analysis by AMESim were carried for basic design of bladder press forming system. We can get a good forming results from bladder press system. Developed bladder press forming system will be largely used in aircraft manufacturing industry field.

The objective of this study is to predict the formability of sheet metal for the bladder press. The static implicit finite element method is applied effectively to analyze bladder forming processes using AutoForm software. The material used for forming analysis is AL2024, and the thickness of the plate is 1.6mm, 1.8mm and 2.0mm. Forming force is shown by 101.92kN～87.22kN. The result from the simulation analysis was applied to the bladder press system.

구형 충격을 받는 필름 코팅된 유리 시스템의 거동을 개발한 유한 요소 프로그램에 의하여 연 구하고자 한다. 충격 거동을 예측하기 위하여 Sun의 higher order beam theory와 Kurapati의 generalized power law와 연계한 새롭고 효과적인 동적 유한 요소법을 제안한다. 필름 코팅된 유리 시 스템과 모놀리식 유리에 대하여 접촉력, 변형량, 운동에너지, 속도 및 응력 등을 계산한 후 결과를 비교 검토하여 코팅 시스템의 필름이 충격 손상을 방지하고 충격 저항이 우수하다는 것을 정성적 및 정량적으로 규명하였다.

Waste oyster shell is a waste product from oyster-culturing farm and also presents a major disposal problem in itself. The present study is conducted to develop equipments for recycling waste oyster shells etc. Through the processing of the recycling treatment of wasted marine products, it is transfered and used as the other functional materials. The advanced drying and crushing equipments are designed and conducted the performance evaluation. Finally, it was shown that performance of these are superior to that of the other existing equipments.

This study was developed the electronic expansion valve using CO2 refrigerant. The electronic expansion valve consist of bellows, stepping motor, 3-stage reduction gear, poppet and orifice. Structural and flow analysis of electronic expansion valve are carried out using commercial code ANSYS and CFX version 14. Structural analysis was conducted for three type bellows(basic, rib and straight type). Asresults, value of maximum equivalent stress showed that basic type was smaller than rib and straight type.

The objective of this study is to calculate flow characteristics and structural safety for triple offset eccentric butterfly valve. The triple offset butterfly valve used in this study was 600mm in size, and the opening angles were 30 degree, 60degree and 90 degree. Structural and flow analysis of triple offset eccentric butterfly valve are carried out by using commercial code ANSYS and CFX version 14. The flow coefficient, Kv, increases as the valve opening increases. The results from fluid structure coupled analysis, maximum equivalent stress was calculated 462.06MPa at opening angle 60 degree

This is a thesis about the experiment of comparison characteristic of exhaust gas in the same condition between diesel engine that is equipped turbocharger to increase effectiveness of the engine which is recently used in a lot of industry which requires high power. Resulting of the experiment turbocharger diesel engine according to response power, difference in low speed is not significant, but in high speed, effectiveness of turbocharger diesel engine is almost the same in four turbocharger. In other hand, in exhaust gas experiment, high response power turbocharger model exhausts less NOX, but it doesn’t significantly affect the result when it comes with decreasing of CO2 and effectiveness of similar power characteristic. As a result, the high response power turbocharger diesel engine is economically effective comparing with the low response power turbocharger diesel engine

The purpose of this study is to develop the flowmeter of high viscosity paint spraying system. In this study, the numerical flow analysis of the flowmeter was performed. The velocity and the pressure distributions were obtained using the turbulent SST(Shear Stress Transport) model. The ICEM-CFD13 and CFXMesher, reliable grid generation software was also adapted to secure high quality grid necessary for the reliable analysis. According to the simulation results, the flow rate of flowmeter is 6.49l/min in case of Δp=45bar. This result was in good agreement with design result and could be applied to the actual design of the high viscosity paint spraying system

In this paper, the response of graphite/epoxy laminated composite beams subjected to impact loads without damage, is studied by the use of the developed finite element program. The modified Hertzian contact law considered elasto-plastic process is used to calculate the dynamic responses between the impactor and laminated target. Numerical results are presented to demonstrate the effects on the histories of contact force, deflection, damage energy, strain and stress through the thickness due to stacking sequence. In view of the kinetic energy response, [0/30/0/-30]2S laminate is faster than that of other two laminates due to its flexural stiffness. In special, the distribution of stress through the thickness shows nearly linear despite its discontinuity of stacking sequences for dynamic analysis unlike static analysis in a laminated composites.

The monolithic glass, without damage, under impact loading, is studied by the use of the coded finite element program. To predict the impact energy of monolithic glass like annealed glass and tempered glass, a finite element approach based on Sun's higher-order beam finite element and impact energy equation is proposed. For this purpose, the contact force-displacements, energy-displacement histories and velocity-acceleration histories etc. are calculated during all impact processes. And, also, by the calculations of the coded FEM program, the geometric parameter like thickness is investigated to determine their impact energy prediction of monolithic glass.

The monolithic glass, without damage, subjected to ballistic impact, is studied by the use of the coded finite element program. To analyze the impact response of monolithic glass like ordinary annealed glass and tempered glass, a finite element approach based on the Hertzian contact law and Sun's higher-order beam finite element is proposed. For verifying effectiveness of this finite element program, the contact force history is analyzed in conjunction with the loading and unloading processes. And, also, the time history of the impact responses such as the strain and stress according to the thickness changes due to transverse impact at the center are calculated

The wheel is an active area of automobile component design and development. The wheel must be durable enough to tolerate significant loads and harsh environment. Temporary tire substituted for spare tire is made in a half band wheel size. Therefore this temporary tire is carried out lightweight and fuel saving of automobile. In this research, structural analysis and fatigue analysis of the temporary steel wheel are carried out using ANSYS 3D-modeling. The model is verified by the equivalent(von-Mises) stress analysis obtained from the ANSYS static structural analysis. Fatigue analysis is performed at the equivalent stress considering the automobile load and moment. Finally, this temporary wheel can be used temporary but not continuously.

The bio reactors with high efficiency using ejector are widely used in gas-liquid system, This is also due to the high efficiency in gas dispersion resulting in high mass transfer rate and low power requirements. Thus, the new liquid fertilizer manufacturing equipment composed with aeration tank, cycling tank and circulation pump using an ejector was developed. The aim of this study is to investigate the effect of an ejector on the liquid fertilizer manufacturing equipment and to design the optimal ejector for actual application using CFD analysis and experimental method. The results show that the suction air mass flow rate is increased, as the diameter of driving ejector nozzle is smaller and the position of nozzle is toward the exit of an ejector.

The hydrofoil-tip mixer can be used to create the desired material by mixing the two materials in various industries, especially in the waste water and sewage water treatment. The purpose of this study is to clarify flow characteristics induced by 3 types impellers in a mixing tank by CFD. In this study, flat plate, hydrofoil and hydrofoil-tip type impellers are used and the rotating speeds of impellers are 25, 35, 45 rpm. The results in present study show that hydrofoil-tip type is the most proper impeller for mixing in the waster water treatment tank and reducing required power of rotating impeller. This results can be used for the design of the mixing tank in the waste water treatment system.