A new algorithm has been propose to detect the reflected light region as disturbances in a real-time vision system. There have been several attempts to detect existing reflected light region. The conventional mathematical approach requires a lot of complex processes so that it is not suitable for a real-time vision system. On the other hand, when a simple detection process has been applied, the reflected light region can not be detected accurately. Therefore, in order to detect reflected light region for a real-time vision system, the detection process requires a new algorithm that is as simple and accurate as possible. In order to extract the reflected light, the proposed algorithm has been adopted several filter equations and clustering processes in the HSI (Hue Saturation Intensity) color space. Also the proposed algorithm used the pre-defined reflected light data generated through the clustering processes to make the algorithm simple. To demonstrate the effectiveness of the proposed algorithm, several images with the reflected region have been used and the reflected regions are detected successfully.

In this paper, we propose an algorithm that estimates the location of lunar rover using IMU and vision system instead of the dead-reckoning method using IMU and encoder, which is difficult to estimate the exact distance due to the accumulated error and slip. First, in the lunar environment, magnetic fields are not uniform, unlike the Earth, so only acceleration and gyro sensor data were used for the localization. These data were applied to extended kalman filter to estimate Roll, Pitch, Yaw Euler angles of the exploration rover. Also, the lunar module has special color which can not be seen in the lunar environment. Therefore, the lunar module were correctly recognized by applying the HSV color filter to the stereo image taken by lunar rover. Then, the distance between the exploration rover and the lunar module was estimated through SIFT feature point matching algorithm and geometry. Finally, the estimated Euler angles and distances were used to estimate the current position of the rover from the lunar module. The performance of the proposed algorithm was been compared to the conventional algorithm to show the superiority of the proposed algorithm.