To control the flow of fluid, several kinds of valves are used. Especially, Main Control Valve (MCV) is the key element of hydraulic system which performs complex control not only controlling the flow of fluid, but also prevent damage of equipment by supplying proper hydraulic pressure to actuator and draining over-supplied hydraulic pressure. While general control valves are producing in domestically, entire quantity of main control valves are depended on importation and it depreciates competitiveness in cost, and time. In this study, to derive the best design of notch structure by following the orifice flow of 6-linked main control valve and the relation between “notch structure” which is the most fundamental element to control the velocity of the fluid and “pressure distribution”, the flow characteristic is compared by comprehending hydraulic pressure and velocity of the fluid using CFD simulation when spool valve is used for “meter-in” and “meter-out” through the opening of the notch structure.

This experimental study was conducted to identify the correlation between speaker design factors and T/S parameters. For experiments to be conducted in the study, the sample speakers modified the damper, sub-cone, and mass of diaphragm of woofer speaker for vehicles were made to find characteristics of mechanical factors of speaker and non-linear factors; and the sound pressure characteristics were investigated. The correlation between design factors and T/S parameters showed that the strength of suspension system and the mass of motor part increased with the increase of mass of cone paper; and the force factor and resonance frequency tended to exhibit different behaviors according to the changes of damper.

Various types of hydraulic valves are used to control hydraulic equipment including construction equipment such as excavator, crane. etc. The main control valve is a core component, to complex control fluid flow or supplying constant fluid pressure to actuator in accordance operating environment. Excessive flow rate is drained for safety of hydraulic system by main control valve. In this study, the scheme program to change the boundary condition according to behavior of the spool valve is developed. Using this results, the CFD analysis are accomplished.

The bending exercises of radial tire is one of the most important structural properties of the sidewall relating to ride and road noise of automobiles. The frequency band analysis is more useful for analyzing tire road noise due to property change of tread and sidewall. In this paper, the vertical stiffness and lateral stiffness of tire which have a various tread and sidewall is measured and the road noise is measured about same road condition. Furthermore, we investigated the effect on the structure of the tire tread and sidewall for the sound pressure level.

The many parts in the hydraulic equipments subject to load by hydraulic pressure. And some parts which are installed to the inside of the hydraulic equipments subject to load by the hydraulic pressure as well as the fluid speed. The inside of the valve generally generates the flow. Considering the valve expansion or the flow of the large valve, the flow is similar to the fluctuation flow in the opened flow system. In this study, the analysis of the flow including the fluctuation are performed and this results will apply to the optimal shape design of the flow path. The load acting on the structure was analysed according to the change in the shape and flow speed of the structure which install in fluid, and the safety evaluation wad investigated in consideration of the flow speed and the depth of fluid.

A deformation of tire structure cause characteristic change of tire as stiffness, ground surface shape, vibration and noise. As a result it will affect "riding quality" factors such as noise and vibration. In this study, figured it out the difference of tire pass by-noise according to ground pressure and stiffness change, to investigate the influence of tire characteristic for tire pass-by-noise. Therefore, The tire ground stiffness and tire pass-by-noise was measured according to pass-by-noise test method(ECE R117). Conclusively, “The tire pass by noise” was confirmed that between vibration and tread shoulder are a close relationship. As the tire shoulder vibration is low, “The acceleration pass-by-noise” can be seen that displayed lower value. In order to distribute contact pressure low for reduce the acceleration pass-by-noise, it could be confirmed that the shoulder stiffness should be greater.

The hydraulic equipments has a high utilization in the many works such as the excavation, planation and crane works in the construction sites. They are an essential equipments in the construction site and the loading & unloading works of the large size objects. In the many parts which are composed of the hydraulic equipments, the main control valve(MCV) is the core of the equipments. The hydraulic energy from the pump controls the direction and the rate of flow by MCV. And the flow rate of the MCV inlet operate some actuators to perform the diverse action of the spool. So, it is important to analysis the shape of the flow path and the notch of the spool. In order to perform the optimal design of the 6-way valve, the study for the analysis of the flow path and the pressure distribution according to the pressure control, which to meet use condition, must be performed. In this study, we carried out the reverse-engineering of the MCV using the parametric technique as the first step in the research of the MCV. And we analyzed the shape of the flow path and the pressure distribution for the notch of the spool using the optimal modeling of the MCV.

The tires changes characteristics of the element constituting change. Stiffness is one of the various characteristics of the tire. Stiffness of the tire is change contact contour. it is known to affect vibration and noise of the vehicle. In this study we conduct to find influence of change stiffness of the tire due to vibration characteristics inside passenger car. For this study we choose tires of available on the market and measure vertical spring rate and lateral spring rate. Also through the real passenger car we find vibration characteristics in the inside of car. In conclusion, vibration energy is reducing with increase in the stiffness and we find the high vibration level of low frequency band in passenger car due to decreasing stiffness.

Sb-doped SnO2(ATO) thin films were prepared using electrospinning. To investigate the optimum properties of the electrospun ATO thin films, the deposition numbers of the ATO nanofibers(NFs) were controlled to levels of 1, 2, 4, and 6. Together with the different levels of deposition number, the structural, chemical, morphological, electrical, and optical properties of the nanofibers were investigated. As the deposition number of the ATO NFs increased, the thickness of the ATO thin films increased and the film surfaces were gradually densified, which affected the electrical properties of the ATO thin films. 6 levels of the ATO thin film exhibited superior electrical properties due to the improved carrier concentration and Hall mobility resulting from the increased thickness and surface densification. Also, the thickness of the samples had an effect on the optical properties of the ATO thin films. The ATO thin films with 6 deposited levels displayed the lowest transmittance and highest haze. Therefore, the figure of merit(FOM) considering the electrical and optical properties showed the best value for ATO thin films with 4 deposited levels.

Fluorine-doped SnO2 (FTO) thin film/Ag nanowire (NW) double layers were fabricated by means of spin coating and ultrasonic spray pyrolysis. To investigate the optimum thickness of the FTO thin films when used as protection layer for Ag NWs, the deposition time of the ultrasonic spray pyrolysis process was varied at 0, 1, 3, 5, or 10 min. The structural, chemical, morphological, electrical, and optical properties of the double layers were examined using X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, the Hall effect measurement system, and UV-Vis spectrophotometry. Although pure Ag NWs formed isolated droplet-shaped Ag particles at an annealing temperature of 300 oC, Ag NWs covered by FTO thin films maintained their high-aspect-ratio morphology. As the deposition time of the FTO thin films increased, the electrical and optical properties of the double layers degraded gradually. Therefore, the double layer fabricated with FTO thin films deposited for 1 min exhibited superb sheet resistance (~14.9Ω/□), high optical transmittance (~88.6 %), the best FOM (~19.9 × 10−3 Ω−1), and excellent thermal stability at an annealing temperature of 300 oC owing to the good morphology maintenance of the Ag NWs covered by FTO thin films.

The hydraulic equipments has a high utilization in the many works such as the excavation, planation and crane works in the construction sites. They are an essential equipments in the construction site and the loading & unloading works of the large size objects. In the many parts which are composed of the hydraulic equipments, the main control valve(MCV) is the core of the equipments. The hydraulic energy from the pump controls the direction and the rate of flow and supply the pressure energy to the some actuators by MCV. In spite of the domestically producing of the common control valves, the MCV which used to the domestic equipments is imported the whole quantity. In this study, it is to reverse-engineer the MCV as the first step in the development of the MCV. To analyze the notch of the spool and the flow path and to apply the formula technique, we try to realize the optimal modeling of the MCV.

The improvement of car driving comfort is requested according to development of automobile manufacturing technology. Therefore, many experts have been studying automotive vibration of normally driving cars to improve automotive driving comfort. Vibration characteristics of a tire play an important role to judge a ride comfort ability and sound quality for a vehicle. A lots of study on the ride and the noise to reduce the vibration in the 20∼100Hz frequency range was being carried out for years. The tire impact due to the bump is the main factor of the vibration in the 20∼100Hz. This vibration is related to the harshness which perceive the displeasure or noise. In this study, we investigated the characteristics of the impact harshness due to the stiffness of the tire tread part according to change the tread compound.

The loudspeaker is the directly radiated speaker which generates the sound by the vibration of cone paper. Therefore the shape and the vibration characteristics of th cone paper is important factors affecting the performance of speaker. The vibration mode of cone paper is piston mode that vibrates to the up-down direction, and we can see the divided vibration in the higher mode. Because the loudspeaker has a damper, the vibration mode is different to the mode of the only cone paper. In this study, the vibration mode of cone paper which considering the damper and the effects of the damper diameter were investigated by finite element method

The characteristic test define the thiele-small parameters and the speaker is modeled to linear or non-linear model by thiele-small parameters. The performance test is carried out the sound quality by feeling test(subjective test) and objective test. The feeling test has many problems in a viewpoint of reliability, repeatability and preference that are related to judge. The study on the correlation between feeling test and objective test are carried out in some researches and introduce the loudness, sharpness, roughness and fluctuation strength. In this study, the loudness characteristics, which is related to sound quality, of the woofer speaker that are fitted to the domestic vehicle is investigated by measurement

Among many potential problems associated with automobiles, the problem regarded as most sensitive and important to the customers is the automobile’s quietness. In particular, because the trend toward the high-performance automobiles is increasing, the quietness should be considered reflecting the increasing demand of the customers for the comfort of automobile ride. Road noise is the low-frequency range in the region of 20Hz to 350Hz, generated when the tires are making contacts with the rough road surface while the automobile is running, in which the noises are resonating within the passenger compartment or with the automobile suspension. In this research, among the factors related to the road noise, the influencing factors associated with the suspension and the tire design were investigated. In particular, among the tire design factors, the structure and the rubber material were investigated as the influencing factors, and for the investigative purpose, experimental tires were manufactured and road noise evaluations were conducted thorough actual feeling tests. Then the test results and correlations were analyzed using the 6-Sigma statistical method. Results from this study shows that, among the tire design factors, the apex is the most influencing factor, in which the height of the apex is the key. The influential factors were found out to be apex height, belt angle, and tread hardness, in that order, and when the suspension is of a same kind, the tendency of the road noise was found to be similar.

In the car speaker, because the sound characteristics is changed by the space of car which mount the speaker, the speaker elements must be decide according to sound field. In this study, the mass of cone paper and damper is changed and the characteristics of the sound pressure and loudness are investigated by the experimental approach. According to the change of the speaker characteristics, the sound pressure and loudness level are changed. The effect of the con paper is larger than that of the damper in the aspect of the loudness. In the future, these data will be used to investigate the correlation between the sound quality and measurement data.

The belt in the tire components is the special cord between tread and carcass. The belt, which is compose of some steel cord and thin rubber layer, prevent to propagate the crack or external damage from tread and the separation of rubber layer and carcass. The change of belt part such as the density of steel cord, the cutting angle of cord influences on tire performance. In this study, the density of steel cord and the cutting angle of cord are changed and investigated the static/dynamic characteristics(vertical / lateral stiffness, contact length / width / area, harshness) and noise.

The objective of this paper is to compare the site-to-site variability of ISO 10844 pass by the noise test sites. In order to investigate the site-to-site variance of test surfaces, European commercial tires are tested at seven different test sites. Three Korea test sites and four Europe test sites are selected. The pass by noise test is done according to a 2001/43/EC regulation. Although the ISO surface has a very specific track composition, it does not reduce the variation of pass by noise measurements over the surface of test sites. This paper shows that the test results of pass by noise level are different depending on the test sites. The correlation obtained in this work is able to predict the pass by noise level for certain test site using the data measured from another test site. The prediction value is range with an error within 1 dB(A).

Among many potential problems associated with passenger cars, the problem regarded as most sensitive and important to the customers is the passenger car’s quietness. In particular, because the trend toward the high-performance passenger cars is increasing, the quietness should be considered reflecting the increasing demand of the customers for the comfort of passenger car ride. Road noises are of low-frequency in the region of 20Hz to 350Hz, generated when the tires are making contacts with the rough road surface while the passenger car is running, in which the noises are resonating within the passenger compartment or with the passenger car suspension. In this research, among the factors related to the road noises, the influencing factors associated with the suspension and the tire design were investigated. In particular, among the tire design factors, the structure and the rubber material were investigated as the influencing factors, and for the investigative purpose, experimental tires were manufactured and road noise evaluations were conducted thorough actual feeling tests. Then the test results and correlations were analyzed using the 6-Sigma statistical method.

The shape of tire footprint is one of the important factor which affects to the performance of tire such as handling, ride and wear. In this study, the effect of the stiffness for tire footprint is investigated. Some tires on the market were selected and tested the vertical stiffness, lateral stiffness by stiffness measuring system. And the contact length, contact width and contact area are tested, too. The contact width and length is reduced by the increase of the tire stiffness. According to the change of the tire stiffness, the leading edge and trailing edge in the footprint have a different shape.