장미 ‘Sahara’는 국립원예특작과학원에서 2022년에 육성한 분홍톤 아이보리 스프레이 장미 품종으로 2013년 빨간색 스프레 이 품종 ‘Fangfare’에 아이보리색 스프레이 품종 ‘Vivien’을 부본으로 인공 교배 하였다. 총 73개의 교배 실생을 얻었으며 2015년부터 1, 2, 3차 특성검정을 통해,화색과 화형이 안정적이 며 생산성 및 절화 특성이 우수한 ‘원교 D1-360’을 최종 선발하 여 2022년 ‘Sahara’로 명명하고 국립종자원에 품종보호 출원· 등록하였다(등록번호 제9771호). 장미 ‘Sahara’ 품종은 분홍톤 크림색(155D)의 꽃잎수는 71.5매인 겹꽃으로 화폭과 화고는 각각 4.9, 3.1cm이며 소화수가 7.4개/줄기인 스프레이 장미이 다. 장미 ‘Sahara’ 품종의 절화장은 평균 73.8cm로 대조 품종 ‘Pink shin’56.9cm 대비 길며, 절화 수명은 약 17.8일로 ‘Pink shin’ 15.6일 보다 2일 정도 길다. ‘Sahara’는 절화 생산량은 연간 168본/m2로 ‘Pink Shine’ 140본 대비 생산량이 많다. 전자코를 이용한 PCA분석결과 주성분1과 2는 각각 99.3%와 0.6%로 전체 변이량의 99.9%를 반영하고 있다. Rader plot 분석결과 P10/2,P40/1 및 T30/1 센서 반응이 높았으며 총 6개 센서에서 모두 ‘Sahara’는 대조품종 ‘Pink Shine’에 비해 반응이 낮았다. 절화용 스프레이 장미 ‘Sahara’ 품종은 파스텔톤 의 중형 소화로, 균일한 절화 품질 및 우수한 수량으로 재배농가 의 선호도가 높아 국내에서 많이 재배될 것으로 기대된다.

프리지아 ‘Sunny Gold’는 농촌진흥청 국립원예특작과학원 에서 2010년 노랑색 반겹꽃 프리지아 육성계통 ‘036010’을 모본으로 진노란색 홑꽃 ‘Golden Flame’을 부본으로 교배하여 획득한 종자로부터 2011년 진노란색 겹꽃의 향기가 강한 프리지아 계통을 선발하여 품종화 하였다. 2011년부터 2016년까지 개화 생육특성검을 수행하였으며 핵심수요자의 기호도 평가를 통해 선발되어 2017년 ‘Sunny Gold’ 로 명명되었다. ‘Sunny Gold’는 RHS color chart YO17B의 노란색 겹꽃 프리지아 품종으로 화폭은 6.7cm로 대조품종 ‘Golden Flame’ 6.1cm에 비해 크고, 분지수는 6.5로 다수확성 품종이다. 초장이 101.9cm로 초세가 강하다. ‘Sunny Gold’의 소화수 및 소화장은 각각 13.0개, 9.3cm이며 개화소요일수는 137.7일이다. 이 품종의 절화수명은 약 9일이며 자구번식력은 5.3배로 대조 품종 ‘Golden Flame’ 4.3배에 비해 우수하다. 전자코를 이용한 PCA분석결과 PC1과 PC2는 각각 99.3%와 0.6%로 전체 변이량의 99.9%를 반영하고 있다. Rader plot 분석결과 총 6개 센서에서 모두 ‘Sunny Gold’의 센서값이 향기가 강한 상용품종 ‘Yvonne’의 값에 비해 높게 나타나 ‘Sunny Gold’의 향기가 더 강한 것으로 나타났다.

The cotton bollworm, Helicoverpa armigera, is an economically important pest, which harms various kinds of important agricultural crops, such as tomato. The purpose of the present study was to investigate the effect of ionizing radiations (electron beam, X-ray, gamma-ray) on the development and reproduction of H. armigera and to determine the optimal dose of three ionizing radiations for the construction of quarantine technology applicable to tomato export.

Whitefly (Hemiptera: Aleyrodidae) pests, including the sweetpotato whitefly, Bemisia tabaci, and the greenhouse whitefly, Trialeurodes vaporariorum, are economically important in agriculture. With the annual growth of the domestic fresh fruit export market, various quarantine treatment methods are being used to export strawberries of better quality. The purpose of the present study was to investigate the effect of ionizing radiations (electron beam, X-ray, gamma-ray) on the development and reproduction of two species of whitefly and to determine the optimal dose of three ionizing radiations for the construction of quarantine technology applicable to strawberry export.

Whitefly (Hemiptera: Aleyrodidae) pests, including the tobacco whitefly, Bemisia tabaci, and the greenhouse whitefly, Trialeurodes vaporariorum, are economically important in agriculture. With the annual growth of the domestic fresh fruit export market, various quarantine treatment methods are being used to export strawberries of better quality. The objective of the present study was to evaluate the effects of gamma rays on the development and reproductive sterility of B. tabaci and T. vaporariorum. In both species, the eggs were completely inhibited from hatching at 50 Gy, and the emergence of 3rd instar nymphs was completely suppressed at 150 Gy. Some adult B. tabaci and T. vaporariorum spawning occurred at 100 Gy and 70 Gy, respectively; however, at these irradiation levels, F1 hatchability was completely inhibited. Dosimetry results showed that the penetrating power of gamma ray in the strawberry-filled box was the lowest at the mid-box position. Therefore, B. tabaci and T. vaporariorum were placed in the middle of the strawberry-filled box and irradiated. A gamma-ray irradiation of 100 Gy suppressed the development and reproduction of eggs and adults in both B. tabaci and T. vaporariorum. However, the development of 3rd instar nymphs was inhibited at 300 Gy for B. tabaci and 200 Gy for T. vaporariorum. Our data suggest that at least 300 Gy should be used for the control of these two types of whitefly for strawberry export.

The green peach aphid, Myzus persicae Sülzer, is an important sap-sucking pest of many plants, including Chinese cabbage. The objective of this study was therefore (1) to determine the effects of sublethal concentrations of afidopyropen, sulfoxaflor, and spirotetramat on adult longevity and the fecundity of M. persicae, and (2) to study the feeding behavior of M. persicae on Chinese cabbage leaves treated with various concentrations of these three insecticides. Longevity and total fecundity of M. persicae adults were decreased at concentrations higher than LC30. Feeding behavior analyses using an electrical penetration graph showed that sublethal concentrations of afidopyropen, sulfoxaflor, and spirotetramat had significant effects on the duration of phloem ingestion.

Composite resins are developed as restorative materials to improve esthetics and mechanical properties. To improve the physical properties of resin material, resin filler have to be added. However, no imaging method is adopted for resin filler distribution. Optical coherence tomography (OCT) is a optical imaging technique to delineate microscopic structures within biological tissue. The OCT application to dental composites resin and its filler is not described yet. So, this new and advanced optical method is needed for clinical application for evaluation of dental composite resin. To analyze the spatial distribution of dental composite resin and to evaluate the resin restoration in cavity, frequency domain optical coherence tomography (FD-OCT) was used for their analysis. Resin restored tooth was prepared. For morphological observation, serially sectioned teeth, conventional X-ray taking and micro computed-tomography (CT) images were compared with OCT images. The experiment has done to evaluate the success of the resin restoration using 3 dimensional structure OCT image. In this research, OCT is evaluated as a new technique to image resin restoration. The evaluation of resin restored tooth was performed by OCT. Inappropriate restoration such as marginal adaptation, large porosities, internal integrity and poor contour could be detected. Resin filler also could be checked by OCT. The distribution, number, regularity and size of resin filler can be differentiated from several commercial products. Considering the characteristics of the OCT, it can be used to evaluate the defects of resin restoration, resin filler distribution, and internal integrity between resin material and tooth structure. The OCT can be considered to be a new and advanced method for the evaluation of resin restorations.