원자로의 해체 과정에서 발생되는 방사성 폐기물 내 존재하는 55Fe, 63Ni은 폐기물의 처리방법을 결정하는 데 있어 기초적인 지표로 활용되는 중요한 핵종이다. 하지만 두 핵종은 낮은 방사선량으로 인해 다른 핵종들과의 분리가 필수적이며 또한 시 료 매질에서 완전히 추출할 수 있는 전처리가 선행되어야 한다. 따라서 본 연구는 다양한 매질의 원자로 해체 폐기물에 대한 전처리방법의 적용성을 평가하기 위해 NIST SRM 5종 (1646a, 1944, 8704, 2709a, 1633c)에 대하여 왕수, 불산, 과염소산을 각각 이용하는 습식산화법과 alkali-fusion 전처리법에 따른 Iron와 Nickel의 회수율을 비교하였다. 실험 결과 alkali-fusion 방법은 다양한 매질의 인증표준물질에 대해 Iron 95.3~98.3%, Nickle 86.6~88.1%의 분석 정확도와 2% 이하의 정밀도를 나타냄으로서 해체폐기물 중 55Fe, 63Ni 분석에 가장 최적화된 전처리법으로 판단된다.

This study aims to implement the modeling of selected substances for the evaluation of Atmospheric Environmental Capacity by means of the data of 2006 atmospheric pollution substance emissions. As a result, it turned out that the substance with the concentration higher than Atmospheric Environmental standard concentration was NO2, and 17.6% of the total regions researched turned out to exceed the standard concentration. In addition, set was the targeted amount to be reduced in the areas where the upper limit of emission per unit lattice was exceeded, and the model was adopted accordingly. As a result, it turned out that about 80% of the actual emission should be reduced to meet the 2006 Atmospheric Environmental standard over the Daegu. In reality, it is impossible to reduce 80% of the actual emission. Thus, the same ratio of reduction was applied in all of the Daegu regions, and the modeling was applied. The results are as follows: When 30% was reduced, the level went down to 50 ppb, which is as high as 2006 Atmospheric Environmental standard; when 50% was reduced, the level went down to 30 ppb, which is as high as 2007 Atmospheric Environmental standard.