Safety has once again emerged as a social issue due to the enforcement of the Serious Disasters Punishment Act and the occurrence of major disasters recently. As such, the safety culture related to unsafe human behavior is drawing attention as various discussions about the importance of safety and accident prevention are currently being undertaken. This study aims to determine whether changes in the level of safety culture in companies affect the accident rate. To this end, we targeted three workplaces in the same company in the domestic manufacturing industry, and 2,790 people were surveyed using DNV's Safety Will(ISRS-C version 4.0) for safety culture level diagnosis. The change in safety culture level and accident rate were compared and analyzed after carrying out safety culture level improvement activities for 5 years. As a result, the level of safety culture increased by 5.8 points, an overall improvement of 9.5%, while the total number of accidents decreased by 20%, from 5 to 4, indicating a general decreasing trend in accident occurrence. Results confirmed that the change in the level of safety culture affects the accident rate, and the improvement in the level of safety culture affects a reduction in accidents. Therefore, this study suggests that efforts to improve the level of safety culture within a company can be associated with accident reduction and accident prevention outcomes.
The fabrication of interconnect from titanium powders and powders is investigated. Corrosion-resistant titanium and are used as reinforcement in order to reveal high heat and corrosion resistance at the elevated temperature. We fabricated the plates for interconnect reinforced with by mixing titanium powders with 10 wt.% of nano-sized . Spark Plasma Sintering (SPS) was chosen for the sintering of these composites. The plate made of titanium powders and powders demonstrates higher corrosion resistance than that of the plate of titanium powders alone. The physical properties of specimens were analyzed by performing hardness test and biaxial strength test. The electrochemical properties, such as corrosion resistance and hydrogen permeability at high temperature, were also investigated. The microstructures of the specimens were investigated by FESEM and profiles of chemical compositions were analyzed by EDX.