We estimate the fractal dimension of the ρ Ophiuchus Molecular Cloud Complex, associated with star forming regions. We selected a cube (v, l, b) database, obtained with J = 1−0 transition lines of 12CO and 13CO at a resolution of 22′′ using a multibeam receiver system on the 14-m telescope of the Five College Radio Astronomy Observatory. Using a code developed within IRAF, we identified slice-clouds with two threshold temperatures to estimate the fractal dimension. With threshold temperatures of 2.25 K (3σ) and 3.75 K (5σ), the fractal dimension of the target cloud is estimated to be D = 1.52–1.54, where P / AD/2 , which is larger than previous results. We suggest that the sampling rate (spatial resolution) of observed data must be an important parameter when estimating the fractal dimension, and that narrower or wider dispersion around an arbitrary fit line and the intercepts at NP = 100 should be checked whether they relate to rms noise level or characteristic structure of the target cloud. This issue could be investigated by analysing several high resolution databases with different quality (low or moderate sensitivity).

We present a multi-dimensional reduction method of the surveyed cube database obtained using a single- dish radio telescope in Taeduk Radio Astronomy Observatory (TRAO). The multibeam receiver system installed at the 14 m telescope in TRAO was not optimized at the initial stage, though it became more stabilized in the following season. We conducted a Galactic Plane survey using the multibeam receiver system. We show that the noise level of the first part of the survey was higher than expected, and a special reduction process seemed to be definitely required. Along with a brief review of classical methods, a multi-dimensional method of reduction is introduced; It is found that the ‘background’ task within IRAF (Image Reduction and Analysis Facility) can be applied to all three directions of the cube database. Various statistics of reduction results is tested using several IRAF tasks. The rms value of raw survey data is 0.241 K, and after primitive baseline subtraction and elimination of bad channel sections, the rms value turned out to be 0.210 K. After the one-dimensional reduction using ‘background’ task, the rms value is estimated to be 0.176 K. The average rms of the final reduced image is 0.137 K. Thus, the image quality is found to be improved about 43% using the new reduction method.

The reactive oxygen species (ROS) generated during the somatic cell transfer nuclear (SCNT) procedures may cause the mitochondrial dysfunction and DNA damage, which may result in restricts the reprogramming of SCNT embryos and play a key direct role in apoptosis. The present study was conducted to investigate the effect of antioxidant treatment during the SCNT procedures on the inhibition of mitochondria and DNA damages in bovine SCNT embryos. The reconstituted oocytes were treated with antioxidants of 25 μM β-mercaptoethanol (β-ME) or 50 μM vitamin C (Vit. C) during the SCNT procedures. In vitro fertilization (IVF) was performed for controls. Mitochondrial morphology and membrane potential (ΔΨ) were evaluated by staining the embryos with MitoTracker Red or JC-1. Apoptosis was analyzed by Caspase-3 activity assay and TUNEL assay, and DNA fragmentation was measured by comet assay at the zygote stage. Mitochondrial morphology of non-treated SCNT embryos was diffused within cytoplasm without forming clumps, while the IVF embryos and antioxidant treated SCNT embryos were formed clumps. The ΔΨ of β-ME (1.3±0.1, red/green) and Vit. C-treated (1.4±0.2, red/green) SCNT embryos were significantly higher (p<0.05) than that of non-treated SCNT embryos (0.9±0.1, red/ green), which similar to that of IVF embryos (1.3±0.1, red/green). Caspase-3 activity was not difference among the groups. TUNEL assay also revealed that little apoptosis was occurred in SCNT embryos as well as IVF embryos regardless of antioxidant treatment. Comet tail lengths of β-ME and Vit. C-treated SCNT embryos (337.8±23.5 μm and 318.7 ±27.0 μm, respectively) were shorter than that of non-treated SCNT embryos (397.4± 21.4 μm) and similar to IVF embryos (323.3±10.6 μm). These results suggest that antioxidant treatment during SCNT procedures can inhibit the mitochondrial and DNA damages of bovine SCNT embryos.

Bacterial contamination reduces the semen quality, semen preservation, and cause of disease spread as well. Sperm fertility is essential factor of reproductive performance in swine. Sperm fertility is affected by semen quality such as sperm motility, abnormality, morphology, and rate of bacterial contamination. This study was conducted to determine the relationship between elapsed time after semen preservation on the changes of bacteria and semen quality. Semen was diluted with BTS extender without antibiotic for 7 days and sperm parameter and fertility were measured. Sperm motility was measured by CASA and total bacteria number was counted after 22 24 hr incubation from counting agar plate in which sperm dilute to 10 106 in 0.9% saline solution and inoculate to agar. Acrosomal integrity was measured by Chlortetracycline (CTC) staining. CTC patterns were uniform fluorescence over the whole head (pattern A), characteristic of uncapacitated acrosome-intact spermatozoa; fluorescence-free band in the post-acrosomal region (pattern B), characteristic of capacitated acrosome-intact spermatozoa; and almost no fluorescence over the whole head except for a thin band in the equatorial segment (pattern C), characteristic of acrosome reacted spermatozoa. Total number of bacteria was significantly increased (p<0.0001) 3 days after preservation. Sperm motility, viability, and morphological abnormality on elapsed time after preservation were lower from 5 (77.24±6.47, p<0.001) and 7 days (77.24±6.47, p< 0.001) after preservation compared to 1 (15.71±7.18) and 3 days(18.39±7.22) after preservation, respectively. Sperm viability was significantly lower (53.25±35.03, p<0.0001) at 7 days after preservation. Mohological abnormality of sperm was lower (p<0.001) at 1 (15.71±7.18) and 3 (18.39±7.22) days compared to (5 21.84±7.91) and 7 (22.59± 9.93) days after preservation. Acrosomal integrity and capacitation rate (pattern A) were significantly lower (p<0.001) from 5 days after preservation.

본 연구를 통하여 나노입자를 분리막의 표면에 함침시킴으로써 MBR 공정상에서 가장 큰 문제인 막 오염 문제를 해결하고자 하였고 실제 제작된 분리막의 현장적용 테스트를 거쳐서 개발된 분리막의 막 오염 저항성질을 확인하였다. 실험과정은 본 연구를 통한 티타니아가 함침된 분리막 제품과 국외의 타사 제품과의 장시간 현장적용 테스트를 통해 본 연구 제품의 우수성을 확인할 수 있었다. 본 연구 제품은 활성슬러지의 농도가 7,000∼13,000 mg/L의 고농도인 조건에서 20∼25 L/m 2 ⋅hr의 투과유량을 꾸준하게 유지하는 것을 확인할 수 있었다. 이와 아울러 막과 막사이의 배치거리, 막과 산기관의 배치거리, 산기관의 홀 크기, 세정액의 농도 및 처리 방법 등에 따른 분리막의 투과유량의 거동 등을 살펴보았다. 즉 이들 부수적인 변수들의 최적화를 통해 분리막의 물성을 극대화할 수 있는 방법을 모색해 보았다.

Using a developed high-frequency induction heated combustion method. the simultaneous synthesis and densification of WC-xvol.%Co() hard materials was accomplished using elemental powders of W, C and Co. A complete synthesis and densification of the materials was achieved in one step within a duration of 1min. The final relative densities of the composite were over 98.5% for all cases, under the applied pressure of 60 MPa and the induced current. The hardness of the composites decreases and the fracture toughness increases with increasing cobalt content. As the carbon to tungsten ration increases, the hardness increase, but the fracture toughness decreases. The maximum values for the fracture toughness and hardness are 15.1 (at 20vol.%Co, W:C=1:1), and 1928 (at 5vol.%Co, W:C=1:1.3), respectively. Therefore we concluded that the HFIHCS method. which can produce WC-xvol.%Co within 1 minute in one step is superior to conventional ones.