Even though a huge amount of spent nuclear fuels are accumulated at each nuclear power plant site in Korea, our government has not yet started to select a final disposal site, which might require more than several km2 surface area. According to the second national plan for the management of high-level radioactive waste, the reference geological disposal concept followed the Finnish concept based on KBS-3 type. However, the second national plan also mentioned that it was necessary to develop the technical alternatives. Considering the limited area of the Korean peninsula, the authors had developed an alternative disposal concepts for spent nuclear fuels in order to enhance the disposal density since 2021. Among ten disposal concepts shown in the literature published in 2000’s, we narrowed them to four concepts by international experiences and expert judgements. Assuming 10,000 t of CANDU spent nuclear fuels (SNF), we designed the engineered barriers for each alternative disposal concept. That is, using a KURT geological conditions, the engineered barrier systems (EBS) for the following four alternative concepts were proposed: ① mined deep borehole matrix, ② sub-seabed disposal, ③ deep borehole disposal, and ④ multi-level dispoal. The quantitative data of each design such as foot prints, safety factors, economical factors are produced from the conceptual designs of the engineered barriers. Five evaluation criteria (public acceptance, safety, cost, technology readiness level, environmental friendliness) were chosen for the comparison of alternatives, and supporting indicators that can be evaluated quantitatively were derived. The AHP with domestic experts was applied to the comparison of alternatives. The twolevel disposal was proposed as the most appropriate alternative for the enhancement of disposal efficiency by the experts. If perspectives changes, the other alternatives would be preferred. Three kinds of the two-level disposal of CANDU SNF were compared. It was decided to dispose of all the CANDU spent nuclear fuels into the disposal holes in the lower-level disposal tunnels because total footprint of the disposal system for CANDU SNF was much smaller than that for PWR SNF. Currently, we reviewed the performance criteria related to the disposal canister and the buffer and designed the EBS for CANDU SNF. With the design, safety assessment and cost estimates for the alternative disposal system will be carried out next year.

Nuclear power is responsible for a large portion of electricity generation worldwide, and various studies are underway, including the design of permanent deep geological disposal facilities to safely isolate spent nuclear fuel generated as a result. However, through the gradual development of drilling technology, various disposal option concepts are being studied in addition to deep geological disposal, which is considered the safest in the world. So other efforts are also being made to reduce the disposal area and achieve economic feasibility, which requires procedures to appropriately match the waste forms generated from separation process of spent nuclear fuel with disposal option systems according to their characteristics. And safety issue of individual disposal options is performed through comparison of nuclide transport. This study briefly introduces the pre-disposal nuclide management process and waste forms, and also introduces the characteristics of potential disposal options other than deep geological disposal. And environmental conditions and possible pathways for nuclide migration are reviewed to establish transport scenarios for each disposal option. As such, under this comprehensive understanding, this study finally seeks to explore various management methods for high-level radioactive waste to reduce the environmental burden.

It is expected that around 576,000 bundles of CANDU spent nuclear fuels (SNF) will be generated from the four CANDU reactors located at the Wolsong site. The authors designed and proposed a reference disposal concept based on the KBS-3 type and KURT geological data in 2022. In addition, we have reviewed the literatures and selected four alternative disposal methods to develop the higherefficiency disposal concept than the reference concept since 2021. As known well, the most important safety functions of the geological disposal are containment and isolation, and the secondary function is retardation. A disposal canister covers the former, and buffer may do the latter. In this study, we design the engineered barrier systems for the four alternative concepts: (1) mined deep borehole matrix, (2) sub-seabed disposal, (3) deep borehole disposal, and (4) multi-level dispoal. Assuming total 10,000 tU of CANDU SNF, four different kinds of unit disposal module consisting of disposal canisters and compacted bentonite buffers are designed based on the technique currently available. Two alternative concepts, sub-seabed disposal and multi-level disposal, share the same unit module design with the reference concept in 2022. For all the alternative concepts, we assume that the density of the compacted buffer is 1.6 g/cm3. For the mined deep borehole matrix disposal, we introduce a disposal canister slightly modified from the Canadian NWMO canister with a capacity of 48 bundles. The thickness of a copper layer is changed to be 10 mm considering the long-term corrosion resistance. The buffer thickness around a disposal canister is 20 cm, and the diameter of a borehole is 100 cm. Two different kinds of buffer blocks are proposed for the easy handling of them. For the deep borehole disposal, a SiC-stainless steel canister is designed, and 63 bundles of CANDU SNF is emplaced in the canister. We expect that the SiC ceramic canister shows very excellent corrosion resistance and has a high thermal conductivity under the geological conditions. The deep borehole will be plugged with four layered sealing materials consisting of granite blocks, compacted bentonite, SiC ceramic, and concrete plugs.

It is expected that around 576,000 bundles of CANDU spent nuclear fuels (SNF) will be generated from the four CANDU reactors located at the Wolsong site, according to the 2nd National Plan for the management of High-Level radioactive Waste (HLW). The CANDU SNFs are currently stored at the dry storage facilities at the Wolsong site. The authors proposed KRS+ geological disposal system consisting of two different concepts, Swedish KBS-3V type and Canadian NWMO type, for the final management of CANDU SNF. Both the concepts were designed based on the geological data obtained from the KURT (KAERI Underground Research Tunnel). The NWMO type is an in-room horizontal placement method. In this study, we try to determine the reference concept among the two proposed concepts at 500 meters below the ground surface. Assuming 10,000 tU of CANDU SNF and the KURT site, we design two engineered barrier systems, that is disposal canisters and buffers. The copper disposal canister is designed with a copper thickness of 10 mm based on a cold spray coating technique for both the disposal concepts. The domestic Ca-bentonite is used for the compact bentonite buffer with dry density of 1.6 g/cm3. Two concepts are compared in terms of safety, economics of the engineered barriers, and environment-friendliness. Because the same amounts of CANDU SNF are disposed of at the same depth, the differences in the disposal area are neglected. For the comparison in terms of safety, the corrosion lifetimes of the disposal canisters of two disposal systems are quantitatively calculated, and the capacities for retarding radionuclide releases of the compacted bentonite buffers are assessed. A computer tool developed by the authors is used in order to assess the lifetime of a disposal canister. In this study, the case that corrosion of a copper canister by sulfide from groundwater through intact buffer is analyzed. The sulfide concentration in groundwater is assumed to be 3 ppm. The most important safety function of buffer is to retard the radionuclide release. Twelve long-lived radionuclides are selected to compare the capacities for retarding the radionuclide transport through the buffer using an analytical solution. The retention time by an engineered barrier consisting of a disposal canister and a buffer is compared with twenty times the half-life of each radionuclide for both the disposal systems. The selected reference concept will be compared with the alternative geological concepts through a further study.

Around 40 years ago, in the mid-1980s, Swedish government approved the KBS-3 method for the direct disposal of spent nuclear fuels (SNF) in Sweden. Since then, this method has become a reference for many countries including Korea, Republic of. The main ideas of the KBS-3 method are to locate SNF at 500 m below the ground surface using a copper disposal canister and a bentonite buffer. In 2016, our government announced the National Plan (NP 2016) regarding the final management of high-level waste (HLW) in Korea. In 2019, new committee were organized to review the NP 2016, and they submitted the final recommendations to the government in 2021. Finally, the government announced the 2nd National Plan in December, 2021. So far, KAERI has developed the technologies related to the final management of SNF in two directions. One follows ‘direct disposal’ based on the KBS-3 concept, and the other ‘recycling’ based on ‘pyroprocessing-and-SFR’ (PYRO-SFR). Even though Posiva and SKB obtained the construction permits with the KBS-3 method in Finland and Sweden, respectively, there are still several technical obstacles to applying directly to our situations. Some examples are as follows: high burnup, huge amounts of SNF, and high geothermal gradient in Korean peninsula. In this work, we try to illustrate some limits of the KBS-3 method. Within our country, currently, the most probable disposal option is the KBS-3 type geological disposal, but no one knows what the best option will be in 20 or 30 years if those kinds of drawbacks are considered. That is, we compare the effects of the drawbacks using our geological data and characteristics of spent fuels. Last year, we reviewed alternative disposal concepts focusing on the direct disposal of SNF and compared the pros and cons of them in order to enhance the disposal efficiency. We selected four candidate concepts. They were multi-level disposal, deep borehole disposal, sub-seabed disposal and mined deep borehole matrix. As mentioned before, KAERI has developed a pyroprocessing technology based on the SFR to reuse fissile radionuclides in SNF. Even though we can consume some fissile nuclides such as 239Pu and 241Pu using PYRO-SFR cycle, there still remain many long-lived radionuclides such as 129I and 135Cs waiting for the final disposal. The authors review and propose several concepts for the future final management of the long-lived radionuclides.

본 연구에서는 고준위 방사성폐기물 심지층 처분시설의 규모 및 layout설정에 필요한 요소인 처분터널 및 처분공 간격에 대한 분석을 수행하였다. 이를 위하여, 기준 처분개념과 공학적 방벽 개념을 바탕으로 다양한 조건의 처분터널 및 처분공 단면을 설정하고, 단층 배치 및 복층 배치 개념 에 따른 처분동굴의 구조적, 열적 안정성을 분석하였다. 분석 결과를 바탕으로 설계에 있어서 주요한 고려인자 중의 하나인 굴착량을 감소시킬 수 있는 처분동굴 및 처분공 간격을 제안하였다. 본 연구의 결과는 심지층 처분시설 설계시 활용될 것이며, 향후, 부지에 대한 불확실성을 줄이기 위하여 정확한 부지특성 자료를 통한 상세한 분석이 필요하다.