본 연구는 무인 항공사진 촬영을 이용하여 해안에 산재한 해안표착물을 탐지하는 새로운 방법을 제시하였다. 이동성과 신속성, 경제성이 우수한 소형 무선 조정 헬리콥터의 기체와 헬리콥터의 진동에 관계없이 연직 상태를 유지할 수 있는 짐벌 장치에 디지털카메라를 장착하여 항공사진 촬영을 시행하였다. 또한, 촬영된 영상으로부터 해안표착물을 탐지하기 위해 Matlab program을 이용한 디지털 영상처리 알고리즘을 고안하였다. 특히 고안된 알고리즘은 배경 차감 기법(Background subtraction method)을 적용하여 연구 대상 해안의 각기 다른 모래 상태로 인해 발생하는 물체 추출 오차를 감소시킴으로써 다양한 형태의 해안표착물을 안정적으로 탐지하는 결과를 보여주었다. 향후, 이 연구 방법을 적용한 해안표착물 모니터링이 이루어질 경우 모니터링 대상 구역 설정의 대표성 문제 해결 및 발생량 추정에 크게 기여할 수 있으며, 해양환경 감시 분야에 활용가능성이 클 것으로 판단된다.

해양오염으로부터 해양환경 및 생태계를 보호하기 위해서는 해양쓰레기 발생 및 이동에 관한 집중적인 연구가 필요하다. 본 연구에서는 해안표착물의 조성과 발생원 분석을 통해 연간 발생량 및 특성에 대한 분석을 하였다. 전라남도 신안군 임자도 대광해수욕장을 대상으로 100 m×20 m(=2,000 m2) 구역을 설정하여 분포량 및 발생 특성을 분석한 결과, 2008년부터 2010년까지 총 1,445 kg의 해안표착물이 수거되었다. 가장 많은 양을 차자하는 품목은 플라스틱으로서 평균 46.5%, 스티로폼 20%, 목재 12.6% 등으로 나타났다. 외국 기인 발생량은 총 155.5kg으로 이중 90% 이상이 플라스틱류로 대부분 중국 기인의 플라스틱과 어업용 부표였다. 한편, 해안표착물의 발생량 변화를 파악하기 위해 해양 환경의 계절적 변화를 분석하였다. 2009년과 2010년은 북풍 계열의 풍향과 풍속이 우세한 계절에 발생 비율이 높았으며, 2008년은 조류의 흐름이 타 연도의 동일 계절과 달리 서향의 왕복성 흐름을 보인 여름철(7월)에 발생률이 40%(409개)로 가장 높게 나타났다. 외국 기인 해안표착물의 계절별 변화를 살펴보면 전체적으로 1윌, 5월에 발생률이 높았으며 11월이 다음으로 많은 양을 차지하였다. 한편, 2008년에는 여름철 (7월) 발생률이 46%로 가장 높은 데 비해 2009년과 2010년에는 4%의 가장 낮은 비율을 보임으로서 상반되는 결과를 나타내었다.

In this study, the effect of Sn and Mg on microstructure and mechanical properties of Cu-Fe-P alloy were investigated by using scanning electron microscope, transmission electron microscope, tensile strength, electrical conductivity, thermal softening, size and distribution of the precipitation phases in order to satisfy characteristic for lead frame material. It was observed that Cu-0.14wt%Fe-0.03wt%P-0.05wt%Si-0.1wt%Zn with Sn and Mg indicates increasing tensile strength compare with PMC90 since Sn restrained the growth of the Fe-P precipitation phase on the matrix. However, the electrical conductivity was decreased by adding addition of Sn and Mg because Sn was dispersed on the matrix and restrained the growth of the Fe-P precipitation. The size of 100 nm Mg3P2 precipitation phase was observed having lattice parameter a:12.01Å such that [111] zone axis. According to the results of the study, the tensile strength and the electrical conductivity satisfied the requirements of lead frame; so, there is the possibility of application as a substitution material for lead frame of Cu alloy.

This study looked at high performance copper-based alloys as LED lead frame materials with higher electrical-conductivity and the maintenance of superior tensile strength. This study investigated the effects on the tensile strength, electrical conductivity, thermal softening, size and distribution of the precipitation phases when Cr was added in Cu-Fe alloy in order to satisfy characteristics for LED Lead Frame material. Strips of the alloys were produced by casting and then properly treated to achieve a thickness of 0.25 mm by hot-rolling, scalping, and cold-rolling; mechanical properties such as tensile strength, hardness and electrical-conductivity were determined and compared. To determine precipitates in alloy that affect hardness and electrical-conductivity, electron microscope testing was also performed. Cr showed the effect of precipitation hardened with a Cr3Si precipitation phase. As a result of this experiment, appropriate aging temperature and time have been determined and we have developed a copper-based alloy with high tensile strength and electrical-conductivity. This alloy has the possibility for use as a substitution material for the LED Lead Frame of Cu alloy.

Na+ ion conductivity can be improved by the substitution of an Mg atom for an Al atom to form a nonstoichiometric Na+ β-alumina. We performed a first principles study to investigate the most stable substitution site of an Mg atom and the resulting structural change of the nonstoichiometric Na+ β-alumina. Al atoms were classified as four different layers in the spinel block that are separated by conduction planes in the nonstoichiometric Na+ β-alumina. The substitution of an Mg atom for an Al atom at a tetragonal site was more favorable than that at an octahedral site. The substitution in the spinel block was more favorable than that close to the conduction plane. This result was well explained by the volume changes of the polyhedrons, by the standard deviation of the Mg-O distance, and by the comparison with bulk MgO structure. Our result indicates that the most preferable site for the Mg atom was the tetrahedral site at the spinel block in the nonstoichiometric Na+ β-alumina.

Density functional theory was utilized to investigate the growth of an indium nanowire on a Si (001) buckled surface. A site between the edge of two Si dimers is most favorable when the first In atom is adsorbed on the surface at an adsorption energy level of 2.26 eV. The energy barriers for migration from other sites to the most favorable site are low. When the second In atom is adsorbed next to the first In atom to form an In dimer perpendicular to the Si dimer row, the adsorption energy is the highest among all adsorption sites. The third In atom prefers either of the sites next to the In dimer along the In dimer direction. The fourth In atom exhibited the same tendency showed by the second atom. The second and fourth In adsorption energy levels are higher than the first and third levels as the In atoms consume the third valence electron by forming In dimers. Therefore, the In nanowire grows perpendicular to the Si dimer row on the Si (001) surface, as it satisfies the bonding of the three valence electrons of the In atoms.

1999년 6월 한국 남동 연안역의 울산과 감포 앞바다에 출현한 용승에 의한 냉수출현현상을 3차원 진단 수치모델을 이용하여 조사하였다. 수치실험에 의한 냉수출현은 바람 영향으로 인하여 울산-감포 앞바다의 수심 50-100m 층에서 발생한 상승류의 효과로 나타났다. 이러한 용승현상은 인접한 부산, 울산 및 감포에서 관측한 바람의 2배인 5.0/m/sec 크기의 바람을 모델에 적용했을 때 발생했다. 따라서 용승현상과 같은 특이한 해양현상을 규명하기 위해서는 육지에서 관측한 자료가 아닌 그 해역에 적절한 바람자료를 이용해야 한다.

The effects of the deposition and annealing temperature on the structural, electrical and opticalproperties of Ag doped ZnO (ZnO:Ag) thin films were investigated. All of the films were deposited with a 2wt%Ag2O-doped ZnO target using an e-beam evaporator. The substrate temperature varied from room temperature(RT) to 250oC. An undoped ZnO thin film was also fabricated at 150oC as a reference. The as-grown films wereannealed in temperatures ranging from 350 to 650oC for 5h in air. The Ag content in the film decreased asthe deposition and the post-annealing temperature increased due to the evaporation of the Ag in the film.During the annealing process, grain growth occurred, as confirmed from XRD and SEM results. The as-grownfilm deposited at RT showed n-type conduction; however, the films deposited at higher temperatures showedp-type conduction. The films fabricated at 150oC revealed the highest hole concentration of 3.98×1019cm-3 anda resistivity of 0.347Ω·cm. The RT PL spectra of the as-grown ZnO:Ag films exhibited very weak emissionintensity compared to undoped ZnO; moreover, the emission intensities became stronger as the annealingtemperature increased with two main emission bands of near band-edge UV and defect-related greenluminescence exhibited. The film deposited at 150oC and annealed at 350oC exhibited the lowest value of Ivis/Iuv of 0.05.

소리도와 욕지도 사이 해역의 유동 분포를 파악하기 위하여 2004년 5월, 6월, 10월 및 11월에 ADCP를 이용하여 정선관측 및 정점관측을 실시하였다. 25시간 정선관측에 따른 평균류의 연직분포는 욕지도 남서해역에서 북동류의 흐름이 우세하게 나타났다. 또한 25시간 정점관측 결과를 보면 상층과 하층의 경계수심이 15~20m에 존재함을 알 수 있었고, 상 하층으로의 유동분포가 다르고 상층과 하층의 변화폭이 작게 나타났다. 동서 성분 및 남북 성분에 대판 해수 수송량의 계산결과는 남서방향으로의 수송량보다 북동방향으로의 수송량이 더 크게 나타났다.

The twenty-one individuals of Meretrix lusoria were secured from Gunsan, Shinan and Yeonggwang on the coast of the Yellow Sea and the southern sea in the Korean Peninsula, respectively. Amplification of a single COI fragment (720 bp) was imagined, and no apparent size differences were observed in amplified fragments between Meretrix lusoria and M. petechialis individuals. The size of the DNA fragments also varied excitedly, from 200 to 1,600 bp. The oligonucleotides primer BION-08 produced the least loci (a total of 17), with an average of 2.43 in the Gunsan population, in comparison to the other primers used. Remarkably, the primer BION-13 detected 42 shared loci by the three populations, major and/or minor fragments of sizes 200 bp and 400 bp, respectively, which were identical in all samples. The dendrogram gained by the seven oligonucleotides primers highlight three genetic clusters: cluster 1 (GUNSAN 01 ~ GUNSAN 07), cluster 2 (SHINAN 08 ~ SHINAN 14) and cluster 3 (YEONGGWANG 15 ~ YEONGGWANG 21). The longest genetic distance among the twentyone Meretrix lusoria individuals that displayed significant molecular differences was between individuals GUNSAN no. 01 and SHINAN no. 14 (genetic distance = 0.574). Comparatively, individuals of SHINAN population were fairly closely related to that of YEONGGWANG population. In this study, PCR analysis has discovered significant genetic distances between two white clam population pairs (P<0.05).

Recently, brick walls are being widely introduced in rural areas. Walls are a very important design element of space. However, most brick wall works do not consider the human psychological characteristics. The purpose of this study was to investigate psychological characteristics on brick wall bonds such as the stack bond, running bond, english bond, flemish bond, america bond. The results of the research can be summarized as follows: 1)There is no statistical difference of psychological evaluation results among student groups using the semantic differential scale method using 10 adjectives. 2)Stack bonds have an uninspiring, artificial, simple, restful, boring and ordered psychological characteristic. Running bonds have an uninspiring, restful and ordered psychological characteristic. America bonds have a unique and modernistic psychological characteristic. English bonds have a unique, modernistic, complex and chaotic psychological characteristic. Flemish bonds have no critical psychological characteristics. 3)The running bond earned the highest score in preference, while the stack bond scored the lowest. Employment of brick wall bonds on this study was not highly preferred, hence it is necessary to develop a new brick wall bond design. 4)In conclusion, the proper selection of brick wall bonds is very important and we should consider human psychological characteristics in the design of rural areas.

Nowadays, local governments have been developing an image to represent their regions' identity. These characters contain unlimited capabilities of utilization and advertising effect that adds to their high value. However, we must consider how effectively the image helps in representing its region because some characters have been produced upon timely basis without consistent long-term planning. This study is to investigate the image and motif of the local government characters from the consumer's perspective. The results are as follows: 1)The images employed by the local governments are not highly preferred and most regions select motifs from their local agricultural products and native plants. 2)The variables that affect the character of the local governments are such as beauty, identity, etc. In conclusion, in order to maximize the local government image, one must improve the design concepts, encourage advertisement of regional festivities and travel commercialization, and advocate the identity and beauty of the local area to the residents and other regional people.

Recently, brick pavement were widely introduced on the pavement in rural area. A variety of vision effects can be created from patterns of brick pavement. However, in most of brick pavement works, human psychological characteristics were not concerned. The purpose of this research was to discover psychological effect on brick pavement pattern. The results of the research can be summarized as follows: 1)Psychological impression on brick pavement pattern is similar among man and woman groups. 2)Stack bond and running bond pattern have a simple, relaxed, organized, and comfortable psychological characteristics. Basket weave & stack bond pattern has a simple and organized psychological characteristic. Herringbone bond pattern has a complex, dislike and uncomfortable psychological characteristic. Pinwheel bond pattern has a highly complex psychological characteristic. Basket weave and Basket weave variation bond pattern have a common psychological characteristic. 3)Employment of brick pavement pattern on this research is not highly preferred, hence it is necessary to develop a brick pavement patterns that have human psychological characteristics be concerned.