The effects of post-CMP cleaning on the chemical and galvanic corrosion of copper (Cu) and titanium(Ti) were studied in patterned silicon (Si) wafers. First, variation of the corrosion rate was investigated as afunction of the concentration of citric acid that was included in both the CMP slurry and the post-CMP solution.The open circuit potential (OCP) of Cu decreased as the citric acid concentration increased. In contrast withCu, the OCP of titanium (Ti) increased as this concentration increased. The gap in the OCP between Cu andTi increased as citric acid concentration increased, which increased the galvanic corrosion rate between Cu andTi. The corrosion rates of Cu showed a linear relationship with the concentrations of citric acid. Second, theeffect of Triton X-100®, a nonionic surfactant, in a post-CMP solution on the electrochemical characteristics ofthe specimens was also investigated. The OCP of Cu decreased as the surfactant concentration increased. Incontrast with Cu, the OCP of Ti increased greatly as this concentration increased. Given that Triton X-100®changes its micelle structure according to its concentration in the solution, the corrosion rate of eachconcentration was tested.

Well-aligned Zinc oxide (ZnO) nanowires were synthesized on silicon substrates by a carbothermal evaporation method using a mixture of ZnO and graphite powder with Au thin film was used as a catalyst. The XRD results showed that as-prepared product is the hexagonal wurzite ZnO nanostructure and SEM images demonstrated that ZnO nanowires had been grown along the [0001] direction with hexagonal cross section. As-grown ZnO nanowires were coated with glucose oxidase (GOx) for glucose sensing. Glucose converted into gluconic acid by reaction with GOx and two electrons are generated. They transfer into ZnO nanowires due to the electric force between electrons and the positively charged ZnO nanostructures in PBS. Photoluminescence (PL) spectroscopy was employed for investigating the movements of electrons, and the peak PL intensity increased with the glucose concentration and became saturated when the glucose concentration is above 10 mM. These results demonstrate that ZnO nanostructures have potential applications in biosensors.