This study delves into the potential application of whisker carbon nanotube (w-CNT) in terms of electrical heating performance, with a particular emphasis on its significance in high-efficiency electrothermal conversion applications. Meanwhile, a comparative study was conducted on traditional carbon nanotubes (T1 and T3) with different aspect ratios. A uniform and dense carbon nanotube paper (BP) was prepared using a vacuum filtration method, including single-layer (T1, T3 and w-CNT BP), double-layer gradient composite (T1/T3-g, w-CNT/T3-g), and mixed composite (T1/T3-m and w-CNT/T3-m). The thickness of each type of BP is approximately 100 μm. The results demonstrated that electrical conductivity and electrical heating performance of single-layer BPs follow the order of T1 > T3 > w-CNT. While, mixed composite BPs are superior to double-layer gradient composite BPs in electrical conductivity and thermal performance. Notably, w-CNT/T3-m BP exhibits excellent electrothermal performance. Under an applied voltage of 5 V, the surface temperature of w-CNT/T3-m BP reaches 190 ℃. When the voltage is increased to 6 V, the surface temperature rises by 150℃ within 10 s, reaching a steady-state temperature of 318 ℃. This excellent electrothermal performance can be attributed to the introduction of w-CNT, which has a perfect and defect free structure according to Raman analysis. In-depth analysis using X-ray diffraction (XRD) indicated a more complete and higher degree of crystallinity in the w-CNT structure. In summary, this study not only provides experimental and theoretical basis for the application of high-performance electrothermal materials based on carbon nanotubes, but also foreshadows their broad application prospects in the field of macroscopic materials.

The presence of tetracycline (TC) has been detected in the human living environment, and its complex structure makes it difficult to degrade. The green and efficient utilization of electroactivated persulfate advanced oxidation technology for the degradation of tetracycline remains a challenge. In this study, N-doped reduced graphene oxide (N-rGO) was prepared using a hydrothermal treatment method with urea as the nitrogen source. Four different mass ratios of graphene oxide (GO) to urea were synthesized, and the optimal mass ratio was determined through degradation experiments of tetracycline. The N-rGO/EC/PMS three-dimensional electrocatalytic system was constructed, and the influence of the experimental data on TC degradation, such as initial pH, PMS dosage and voltage, was determined. Characterization analysis using scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and other methods was conducted. The efficient catalytic ability of N-rGO was demonstrated through the generation of hydrogen peroxide ( H2O2) and consumption of peroxymonosulfate (PMS). The superiority of the three-dimensional (3D) electrochemical advanced oxidation process was proposed by combining different systems. Furthermore, the presence of hydroxyl radicals (.OH), persulfate radicals ( SO4 ·−), and singlet oxygen (1O2) was identified using electron spin resonance (ESR) technology. The utilization of N-rGO as a three-dimensional electrode, coupled with the advantages of PMS activation and electrochemical oxidation processes, is a promising method for treating organic pollutants in wastewater.

Fe3O4/g-C3N4/TiO2 catalyst has been fabricated using a simple ultrasonic method with high photocatalytic activity. The morphology, structure and optical properties of Fe3O4/ g-C3N4/TiO2 were systematically investigated by a variety of characterization techniques. The optimum degradation conditions were investigated by degrading tetracycline (TC) under visible light irradiation. The results showed that the degradation efficiency was the highest when the initial TC concentration was 5.0 mg/L, the pH value was 11 and the catalyst dosage was 1.0 g/L. After 100 min of visible light irradiation, the degradation efficiency of TC achieved at 73.61%, which was 1.64 and 1.19 times that of g-C3N4 and Fe3O4/ g-C3N4, respectively. Moreover, Fe3O4/ g-C3N4/TiO2 had good stability and recyclability. The results of capture experiments showed that ‧O2 − and ‧OH were the main active species during the photocatalytic process, and a possible photocatalytic reaction mechanism of Fe3O4/ g-C3N4/TiO2 catalyst was proposed. This study provides a new way to improve the photocatalytic performance of g-C3N4, which has great potential in degrading pollutants such as antibiotics in wastewater.