간행물
Carbon Letters KCI 등재 Carbon letters
- 발행기관 한국탄소학회
- 자료유형 학술지
- 간기 격월간
- ISSN 1976-4251 (Print)2233-4998 (Online)
- 수록기간 2000 ~ 2024
- 주제분류 자연과학 > 자연과학일반 자연과학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
Vol.34 No.3 (2024년 6월) 25건
1.
2024.06
구독 인증기관 무료, 개인회원 유료
The presence of tetracycline (TC) has been detected in the human living environment, and its complex structure makes it difficult to degrade. The green and efficient utilization of electroactivated persulfate advanced oxidation technology for the degradation of tetracycline remains a challenge. In this study, N-doped reduced graphene oxide (N-rGO) was prepared using a hydrothermal treatment method with urea as the nitrogen source. Four different mass ratios of graphene oxide (GO) to urea were synthesized, and the optimal mass ratio was determined through degradation experiments of tetracycline. The N-rGO/EC/PMS three-dimensional electrocatalytic system was constructed, and the influence of the experimental data on TC degradation, such as initial pH, PMS dosage and voltage, was determined. Characterization analysis using scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and other methods was conducted. The efficient catalytic ability of N-rGO was demonstrated through the generation of hydrogen peroxide ( H2O2) and consumption of peroxymonosulfate (PMS). The superiority of the three-dimensional (3D) electrochemical advanced oxidation process was proposed by combining different systems. Furthermore, the presence of hydroxyl radicals (.OH), persulfate radicals ( SO4 ·−), and singlet oxygen (1O2) was identified using electron spin resonance (ESR) technology. The utilization of N-rGO as a three-dimensional electrode, coupled with the advantages of PMS activation and electrochemical oxidation processes, is a promising method for treating organic pollutants in wastewater.
4,800원
2.
2024.06
구독 인증기관·개인회원 무료
3.
2024.06
구독 인증기관·개인회원 무료
Tariq Aziz, Fazal Haq, Arshad Farid, Li Cheng, Lai Fatt Chuah, Awais Bokhari, Muhammad Mubashir, Doris Ying Ying Tang, Pau Loke Show
4.
2024.06
구독 인증기관·개인회원 무료
Dinesh Kumar Madheswaran, Praveenkumar Thangavelu, Ram Krishna, Mohanraj Thangamuthu, Arulmozhivarman Joseph Chandran, Ilhami Colak
5.
2024.06
구독 인증기관·개인회원 무료
6.
2024.06
구독 인증기관 무료, 개인회원 유료
In response to the growing demand for high-performance lithium-ion batteries, this study investigates the crucial role of different carbon sources in enhancing the electrochemical performance of lithium iron phosphate ( LiFePO4) cathode materials. Lithium iron phosphate ( LiFePO4) suffers from drawbacks, such as low electronic conductivity and low lithium-ion diffusion coefficient, which hinder its industrial development. Carbon is a common surface coating material for LiFePO4, and the source, coating method, coating amount, and incorporation method of carbon have a significant impact on the performance of LiFePO4 materials. In this work, iron phosphate was used as the iron and phosphorus source, and lithium carbonate was used as the lithium source. Glucose, phenolic resin, ascorbic acid, and starch were employed as carbon sources. Ethanol was utilized as a dispersing agent, and ball milling was employed to obtain the LiFePO4 precursor. Carbon-coated LiFePO4 cathode materials were synthesized using the carbothermal reduction method, and the effects of different carbon sources on the structure and electrochemical performance of LiFePO4 materials were systematically investigated. The results showed that, compared to other carbon sources, LiFePO4 prepared with glucose as the carbon source not only had a higher discharge specific capacity but also better rate cycle performance. Within a voltage range of 2.5–4.2 V, the initial discharge specific capacities at 0.1, 0.5, and 1 C rates were 154.6, 145.6, and 137.6 mAh/g, respectively. After 20 cycles at a 1 C rate, the capacity retention rate was 98.7%, demonstrating excellent electrochemical performance.
4,000원
7.
2024.06
구독 인증기관 무료, 개인회원 유료
This paper reports an enhanced strategy for improving the mechanical flexibility and ionic kinetic properties of a double network hydrogel based on Co2+- coordination assistance. The modified double-network hydrogel was obtained by using acrylic acid and N, N-dimethylacrylamide as monomers, adding cross-linking agents and 3D nitrogen-doped graphenes. The tensile fracture rate of the modified hydrogel was 1925% and its tensile strength was 1696 kPa. In addition, the hydrogel exhibited excellent ionic dynamics, and its application to an all-solid-state supercapacitor was able to achieve a specific capacitance of up to 182.8 F g− 1. The supercapacitor exhibited an energy density of 34.2 Wh kg− 1, even when operating at a power density of 5 kW kg− 1, highlighting its significant potential for practical applications.
4,000원
8.
2024.06
구독 인증기관 무료, 개인회원 유료
Jing Yang, Xingyuan Wang, Tingting Zhou, Liangjun Wei, Meiling Guo, Yanan Liu, Xiaoqi Sun, Yanjie Wang
This paper presents the construction and characterization of an amperometric immunosensor based on the graphene/gold nanoparticles (AuNPs/GO) nanocomposite for the detection of the bladder cancer biomarker, apolipoprotein A1 (Apo-A1). The morphological analysis of the AuNPs/GO nanocomposite demonstrated an almost spherical shape of AuNPs and the successful coverage of their surface by graphene oxide. An increased G peak and decreased D peak after the association of AuNPs with GO, implied a reduction in graphene defects. The X-ray photoelectron spectroscopy (XPS) indicated a significant decrease in the quantity of oxygen-containing functional groups in the AuNPs/GO nanocomposite, as compared to the original GO. Furthermore, the developed sensor demonstrated commendable sensitivity and selectivity, with a wide linear range for Apo-A1 detection. Importantly, the immunosensor exhibited remarkable stability over a period of 14 days, signifying its potential for practical applications.
4,000원
9.
2024.06
구독 인증기관 무료, 개인회원 유료
Sulfamonomethoxine (SMM) is widely used to inhibit Gram-positive and Gram-negative bacteria, and improper use of SMM is detrimental to human health and ecological stability. Therefore, a sensitive determination method is of great importance for monitoring SMM residues in water, meat, milk, eggs, etc. Herein, a Pt-functionalized S-doped graphitic carbon nitride (Pt/Sg- C3N4) was constructed for the electrochemical determination of SMM. The as-developed Pt3/ S3-g-C3N4 sensor showed a significant SMM determination performance. The electrochemical oxidation of SMM on Pt3/ S3-g-C3N4/GCE involves two electron transference and was limited by a diffusion process. The as-developed Pt3/ S3-g-C3N4/GCE sensor has good linearity in a wide range of 0.1–120 μmol/L and a remarkably low limit of detection (LOD) of 0.026 μmol/L for SMM determination. In addition, the sensor has high selectivity and anti-interference properties for SMM detection. Furthermore, this Pt3/ S3-g- C3N4/GCE sensor has good reproducibility and stability. Moreover, the recoveries were in the range of 89.6–112.2% for the detection of the SMM in a real sample of egg. The proposed Pt3/ S3-g-C3N4/GCE sensor shows great potential for practical applications in detecting trace amounts of antibiotics.
4,200원
10.
2024.06
구독 인증기관 무료, 개인회원 유료
Accurate and rapid detection of antibiotics is critical for protecting human health and the environment. To this end, we report a novel electrochemical sensor for the simultaneous detection of Levofloxacin (LFX) and Tryptophan (TRP) in dairy samples. Outstanding electrocatalytic activity for the oxidation of LFX and TRP is exhibited by the Activated Nanodiamond (AND) and Ti3AlC2 max phase ( Ti3AlC2max) nanocomposite-modified glassy carbon electrode ( Ti3AlC2max AND/GCE) featured in our sensor. High selectivity and sensitivity are achieved by the sensor, with limits of detection (LOD) of 20.47 nM and 0.309 μM for LFX and TRP, respectively. Moreover, strong anti-parasite capacity is demonstrated by the developed sensor, making it an excellent candidate for the establishment of a reliable sensing platform for antibiotic detection. Findings suggest that this novel sensor could serve as a valuable tool for monitoring the content of LFX and TRP in dairy samples and enhancing the safety of these products.
4,300원
11.
2024.06
구독 인증기관 무료, 개인회원 유료
Carbon dots (CDs) are versatile nanomaterials with tunable luminescent properties. We used a natural plant kaempferol as a carbon source to synthesize multicolor CDs by reacting it with various nitrogen sources. Blue, green, and red CDs (B-CDs, G-CDs, and R-CDs) with emission wavelengths of 445 nm, 510 nm, and 600 nm respectively were successfully synthesized. Their photoluminescence quantum yields of are up to 37.4%, 20.1%, and 30.8%, respectively. Surface analysis revealed abundant nitrogen groups influencing luminescence. B-CDs and G-CDs show excitation-dependent emissions, indicating a potential correlation between their luminescence and particle sizes, while R-CDs exhibit excitation-independent emission, suggesting they belong to molecular state CDs. All three CDs exhibit stable luminescent performance, as well as good salt resistance and photobleaching resistance. The practical application of multicolored CDs in anti-counterfeiting fluorescent inks was further explored. This work offers a straightforward, eco-friendly route to synthesize multicolor CDs.
4,000원
12.
2024.06
구독 인증기관 무료, 개인회원 유료
Ionic liquid/ZIF‑67 derived Co9S8‑SNC catalyst for oxygen reduction reaction in alkaline electrolyte
A series of ZIF-67-C-IL catalysts were prepared using ZIF-67 and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl] imide ([ BMIM]NTf2) ionic liquid as precursors. The structure of the catalysts was characterized by XRD, TEM, SEM and XPS. The catalytic performance of the catalysts for the oxygen reduction reaction (ORR) was evaluated in a three-electrode system. The results confirmed that the high-temperature treatment of the precursors resulted in the formation of N, S codoped carbon-encapsulated Co9S8 nanoparticles. To create N, S co-doped carbon coated Co9S8 nanoparticle catalysts, ionic liquids are used as sulfur and nitrogen sources. The catalytic activity of ORR can be improved using N, S co-doped carbon to prevent the aggregation of Co9S8 nanoparticles. Graphitized and N, S co-doped carbon shells are optimal for achieving high activity stability. Optimal 600-ZIF-67-C(1:1.5)-30IL catalytic activity was observed for ORR. The half-wave potential of ORR was 0.88 V vs. RHE in 0.1 mol L− 1 KOH, with a limit current density of 4.70 mA cm− 2. Similar ORR electrocatalytic activity was observed between this catalyst and commercial Pt/C (20 wt%).
4,000원
13.
2024.06
구독 인증기관 무료, 개인회원 유료
Bortezomib (BTZ) and dasatinib (DA) are two substantial anti-cancer agents with side effects on the human body. In this research, we fabricated a novel electrochemical sensor modified by CuFe2O4/ SmVO4 nanocomposite and 1-ethyl-3-methylimidazolium chloride (1E3MC) as an ionic liquid (IL) ( CuFe2O4/SmVO4/IL/CPE) for coinciding investigation of BTZ and DA for the first time. The CuFe2O4/ SmVO4 synthesized were determined and certified through field-emission scanning electron microscopy (FE-SEM), energy diffraction X-ray (EDX), and X-ray diffraction (XRD). The capability of the sensor was investigated by different electrochemical techniques such as cyclic voltammetry (CV), chronoamperometry (CHA), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The attained data showed that the oxidation signal of bortezomib and dasatinib promoted as an innovative electrochemical sensor. After optimization of the conditions using this sensor at pH 7.0, the oxidation signal of bortezomib and dasatinib showed to be linear with drug concentrations in the range of 0.09–90 μM and 100–500 μM with a detection limit of 5.4 nM and 7.0 μM, respectively, using differential pulse voltammetry method. The values of D and electro-transfer coefficient (α) achieved 2.5 × 10− 5 cm2 s− 1 and 0.99, respectively. The proposed electrochemical sensor exhibited acceptable selectivity and sensitivity for simultaneous detection of bortezomib and dasatinib in pharmaceutical and biological samples.
4,000원
14.
2024.06
구독 인증기관 무료, 개인회원 유료
Graphene-modified melamine sponges (RGO-MSs) were prepared, as adsorbents with photothermal conversion ability, utilizing solar energy to achieve heavy oil temperature rise, viscosity reduction, and efficient adsorption recovery of highly viscous oil. The RGO-MSs were prepared through a simple impregnation method. The photothermal performance and heavy oil adsorption performances of RGO-MSs with different densities and thicknesses were observed. It was found that as the density increases, the thermal conductivity of RGO-MS increases too, leading to the increase of the average oil absorption rate. The reduction of thickness is beneficial to improving of the adsorption rate. The prepared RGO-MS with a density of 21.5 mg/cm−3 and a height of 1 cm (RGO-MS-3-1) shows excellent mechanical properties and fatigue resistance. Cyclic adsorption–desorption of RGO-MS-3-1 was achieved through extrusion/ ethanol washing. After 10 cycles of reuse through extrusion, the adsorption capacity decreased from 52.90 to 50.02 g g− 1, with a loss of 5.4%. The material was then washed with petroleum ether and ethanol in turn. Its adsorption capacity can restored to 98.8% of the initial value, showing a promising application prospect on heavy oil leakage treatment. The easily prepared RGO-MS exhibits excellent light absorption and photothermal oil adsorption properties, providing a good solution for the problem of heavy oil leakage at sea.
4,500원
15.
2024.06
구독 인증기관 무료, 개인회원 유료
Flexible self-supported laser-induced graphene (LIG) electrode devices were facilely fabricated through laser ablation technique by employing commercial polyimide film as the precursor material. Compared with the widely used traditional glassy carbon electrodes, the resulted LIG electrodes displayed abundant porous structure and surface defects. Notably, the onestep yielded LIG electrode devices were endowed with large electrochemically active surface area and accelerated electron transfer ability. Benefiting from its superior electrochemical property, these unmodified LIG electrodes exhibited remarkable enhanced electrochemical oxidation reactivity toward the food additive molecule Allura Red. Based on the augmented oxidation signal of Allura Red molecules on the LIG electrodes, a novel electrochemical sensor with high sensitivity for the detection of Allura Red was successfully developed. The sensor demonstrated a linear detection range spanning from 5 nM to 1 μM and exhibited a detection limit as low as 2.5 nM. Besides, the sensitivity was calculated to be 240.62 μA μM−1 cm− 2. More importantly, the sensor manifested outstanding stability, reproducibility, and practicality, further emphasizing its potential for real-world application.
4,200원
16.
2024.06
구독 인증기관 무료, 개인회원 유료
In recent years, the efficient and clean utilization of coal has been widely concerned by scholars at home and abroad. Despite the abundance of global coal resources, the deep utilization rate of coal is still insufficient. To address this challenge, it has been explored the development and preparation of coal-based high value-added carbonaceous materials. In the present study, a novel process was developed for the preparation of graphene using biphenyl sourced from low-rank coal. Using chemical vapor deposition (CVD) technology, it was successfully implemented for us to grow high-quality graphene on copper foils. The prepared graphene products were observed and characterized using Raman spectroscopy, optical microscopy and scanning electron microscopy techniques. The results of this research provide a new perspective for the utilization of low-rank coal resources.
4,000원
17.
2024.06
구독 인증기관 무료, 개인회원 유료
Evaporative emissions, a major cause of air pollution, are primarily produced by automobiles and can be recovered using adsorbents. This study investigated the effect of the textural properties of polyimide (PI)-based activated carbon fibers (PIACFs) on the adsorption and desorption performance of n-butane, which are a type of evaporative emissions. PI-ACFs were prepared by varying the activation time while maintaining the identical crosslinking and carbonization conditions. The surface morphology and microstructural properties of the ACFs were examined using a field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD), respectively. The textural properties of ACF (specific surface area, pore volume, and pore size distribution) were analyzed using N2/ 77 K adsorption and desorption isotherm curves. The n-butane adsorption and desorption performance were evaluated according to modified ASTM D5228. From the results, the specific surface area and total pore volume of ACFs were determined to be 680–1480 m2/ g and 0.28–1.37 cm3/ g, respectively. Butane activity (BA) of the ACFs increased from 14.1% to 37.1% as the activation time increased, and especially it was found to have highly correlated with pore volume in the 1.5–4.0 nm range.
4,000원
18.
2024.06
구독 인증기관 무료, 개인회원 유료
In the present study, the effects of electrodes type (copper, steel or CFRP) and design (plate or mesh) on electrical stability of conductive cement as exposed to various weathering conditions were investigated. To fabricate these composites, multiwalled carbon nanotube and carbon fiber were added to the cement composites by 0.6 and 0.4% by cement mass. Seven different types of electrodes were embedded to the samples, and their electrical stability was examined during the curing period. In addition, the fabricated samples were exposed to water ingress and cyclic heating conditions. Then, the compressive strength of the samples was evaluated to observe the interfacial bonding between the cement paste and electrodes. Based on the experimental results, it was found that the samples showed different electrical stability even their mix proportion was same. Thus, it can be concluded that the type and design of the electrodes are important in measuring the electrical properties of the conductive cement composites. Specifically, an improved electrical stability of electrodes is required when they are exposed to various weathering conditions.
4,000원
19.
2024.06
구독 인증기관 무료, 개인회원 유료
B. Arjun Kumar, G. Ramalingam, Salah Addin Burhan Al Omari, Nanda Kumar Reddy Nallabala, P. Sakthivel, Saifudeen Kabeer, Sambasivam Sangaraju
Herein, the present work focuses on the effective counter electrode for dye-sensitized solar cells. The bottom–up approach was adapted to synthesize Mn2O3 nanorods via the hydrothermal method and the reduced graphene oxide was merged with Mn2O3 to prepare a nanocomposite. The prepared nanocomposites were subjected to physio-chemical and morphological characterizations which revealed the crystalline nature of Mn2O3 nanorods. The purity level rGO was characterized using the Raman spectrum and the Fourier transform infrared spectroscopy employed to find the functional groups. The morphological micrographs were visualized using SEM and TEM and the high aspect ratio Mn2O3 nanorods were observed with 5–7 nm and supported by rGO sheets. The electrocatalytic nature and corrosion properties of the counter electrode towards the iodide electrolyte were studied using a symmetrical cell. The as-synthesized nanocomposites were introduced as counter electrodes for DSSC and produced 4.11% of photoconversion efficiency with lower charge transfer resistance. The fabricated DSSC devices were undergone for stability tests for indoor and outdoor atmospheres, the DSSC stability showed 93% and 80% respectively for 150 days.
4,000원
20.
2024.06
구독 인증기관 무료, 개인회원 유료
The lithium-ion battery has been utilized in various fields including energy storage system, portable electronic devices and electric vehicles due to their high energy and power densities, low self-discharge, and long cycle-life performances. However, despite of various research on electrode materials, there is a lack of research on developing of binder to replace conventional polymer-based binding materials. In this work, petroleum pitch (MP-50)/polymer (polyurethane, PU) composite binder for lithium-ion battery has fabricated not only to use as a binding material, but also to re-place conventional polymer-based binder. The MP-50/PU composite binder has also prepared to various ratios between petroleum pitch and polymer to optimize the physical and electro-chemical performance of the lithium-ion battery based on the MP-50/PU composite binder. The physical and electrochemical performances of the MP-50/PU composite binder-based lithium-ion battery were evaluated using a universal testing machine (UTM), charge/discharge test. As a result, lithium-ion battery based on the MP-50/PU composite (5:5, mass ratio) binder showed optimized performances with 1.53 gf mm− 1 of adhesion strength, 341 mAh g− 1 of specific discharge capacity and 99.5% of ICE value.
4,000원
1
2
