검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 3

        1.
        2023.11 구독 인증기관·개인회원 무료
        As unit 1 of Kori was permanently shut down in June 2017, domestic nuclear industry has entered the path of decommissioning. The most important thing in decommissioning is cost reduction. And volume reduction of radioactive waste is especially important. According to the IAEA report, more than 4,000 tons of metallic waste is generated during the decommissioning of a 1,000 MWe reactor and most of these wastes are LLW or VLLW. To reduce amount of metallic waste dramatically, we should choose efficient decontamination method. In this study, we conducted dry ice and bead blasting decontamination. We prepared Inconel-600 and STS-304 specimen with dimensions of 30 mm × 30 mm × 5 mm. Loose and fixed contamination was applied on the surface of specimen using SIMCON method. Bead and dry-ice blasting was conducted by spraying alumina and dry ice pellet at the same pressure and distance for the same time. The removal of loose contamination was observed using microscope. It was found that contaminants are significantly removed using both dry ice blasting and bead blasting. However, some abrasive material remained on the surface of specimen. The removal of fixed contamination was verified by weight comparison before and after experiment and cobalt concentration comparison before and after experiment using X-ray Fluorescence Spectroscope (XRF). At least 90% of the cobalt was removed, but some abrasive particle was also remained on the surface of specimen. In this study, it is confirmed that the effectiveness of manufacturing a large-scale abrasive decontamination facility, and it is expected that this technology can be used to effectively reduce the amount of metallic waste generated during decommissioning.
        2.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        목적 : 골프공과 퍼터의 조준보조선의 유무, 개수 및 골프 경력이 퍼팅 시 정렬에 미치는 영향을 분석하고자 하였다. 방법 : 최근 1년간 필드에서 자신의 평균 점수를 알고 사시와 약시가 없는 43명(48.3±10.07세 및 –0.07± 0.74 logMAR)을 대상자로 선정하였으며, 퍼팅 거리 1.5 m 및 3 m에서 조준보조선이 0개, 1개 및 3개인 골프공 과 1개 및 3개인 퍼터를 이용하여 퍼팅 시 정렬 오차를 측정하였다. 결과 : 골프공 및 퍼터의 조준보조선의 유무, 개수 및 골프 경력에 따른 퍼팅 시 정렬 오차를 분석한 결과, 골 프공 정렬의 정확성은 조준보조선 및 핸디캡에 따른 영향이 없는 것으로 나타났다. 하지만, 퍼터 정렬의 정확성은 조준보조선이 1개인 퍼터에 비해 3개인 퍼터에서 증가한 것으로 나타났고 통계적으로 유의한 차이가 발견되었다. 예상 퍼팅 성공률과 주관적 만족도는 조준보조선이 1개인 골프공 및 퍼터에 비해 3개인 골프공 및 퍼터에서 모두 증가하였다. 결론 : 골프공 및 퍼터의 정렬은 전체 퍼팅 수행 과정의 일부분이며, 골프공 및 퍼터의 조준보조선은 정렬 오차 를 일부 감소시키는 것으로 나타났다. 하지만 보다 명확한 분석을 위해 운동학적 측면과 시기능을 모두 고려한 후 속 연구가 반드시 필요할 것으로 생각된다.
        4,500원