초대형 부유식 구조물의 초기 설계단계에서 부체구조물과 상부구조물을 분리하여 해석하는 것이 일반적이며, 부체의 탄성응답해석의 변형모드를 이용하여 상부구조물의 주각부에 강제수직변위를 입력하여 파랑하중에 의한 영향을 고려한다. 하지만 이와 같은 해석법의 경우 각 지점에 변위하중을 입력하는데 어려움이 있다. 본 논문에서는 파랑하중을 지점변위하중으로 직접 입력하지 않고 고정하중과 적재하중에 의한 강도설계 결과를 이용하여 파랑하중의 영향을 증폭계수의 형태로 도출하는 근사 실용정적해석법을 제안한다. 이 연구에서는 4경간 3층 구조물을 예제로 하여 파랑하중의 진폭과 주기, 보 경간을 매개변수로 한 증폭계수의 추이를 분석하였으며 보 모멘트의 증폭계수는 특정회귀방정식으로 나타내었다.

The sewage sludges and livestock manures, respectively, were composted with sawdust used for control moisture in the static piles system composter. The variations of temperature, pH, moisture, C/N ratio, inorganic content, forms of organic materials and nitrogen, and contents of heavy metals were investigated. The results were summarized as follows ; The temperature for composting the sewage sludges reached the highest temperature of 52℃, after 3 days and lasted for 7 days, and then went down 30℃ after 52 days. In the case of composting livestock manures, the temperature reached to 63℃ after 10 days, that lasted for 10 days, and then went down gradually. After upsetting the sewage sludges and livestock manures, the temperature went up but was little changed after 52 days. Thus we decided that the terminal of composting periods would be 52 days. The moisture contents of the sludges and livestock manures for composting were decreased to 30% and 36%, respectively. The contents of inorganic matters and heavy metals were changed by the characteristics of raw materials but increased gradually during composting process. The total contents of organic materials in the sewage sludges and livestock manures for composting were decreased to 7% and 9%, respectively. The contents of ether extracts, resins, hemicellulose and cellulose were decreased but those of water soluble polysaccharides and lignins were not changed. The total contents of nitrogen in sewage sludges and livestock manures were decreased to 43% and 34%, respectively.

This paper describe the method and the result of making a fiber optic gyrocompass measuring the heading angles of a ship with a fiber optic sensor. As the method seeking for the heading angles, it is possible to get the heading angles by measuring the output signals from a stationary fiber optic sensor in at least three directions such as a heading direction and other two directions having phase difference Φ1 and Φ2 to the heading. We made the static fiber optic gyrocompass by a high performance fiber optic sensor having scale factor of 210mV/deg/s and resolution of 0.5deg/hr using this principle. The accuracy of this system was 0.29˚ from 20 numbers of data measuring the arbitrary heading angle.