A plasma torch is a kind of equipment that utilizes an electric arc to dissociate a gas and transfer an electric energy to the gas to generate very high temperature flame. KHNP-CRI has been developed the Plasma Torch Melter (PTM) to reduce radioactive waste disposal volumes and drop the radiation level of wastes. As you guess, there is required condition for proper start-up operation like current, voltage, plasma gas flow, cooling water flow, temperature in melter and so on. Thus, the optimum start-up operation condition of plasma torch will be estimated experimentally in this paper.

In this work, the ablation behavior of monolith ZrB2-30 vol%SiC (Z30S) composites were studied under various oxy-acetylene flame angles. Typical oxidized microstructures (SiO2/SiC-depleted/ZrB2-SiC) were observed when the flame to Z30S was arranged vertically. However, formation of the outmost glassy SiO2 layer was hindered when the Z30S was tilted. The SiC-depleted region was fully exposed to air with reduced thickness when highly tilted. Traces of the ablated and island type SiO2 were observed at intermediate flame angles, which clearly verified the effect of flame angle on the ablation of the SiO2 layer. Furthermore, the observed maximum surface temperature of the Z30S gradually increased up to 2,200 °C proving that surface amorphous silica was continuously removed while monoclinic ZrO2 phase began to be exposed. A proposed ablation mechanism with respect to flame angles is discussed. This observation is expected to contribute to the design of complex-shaped UHTC applications for hypersonic vehicles and re-entry projectiles.

KHNP-CRI has developed Mega-Watt Class PTM (Plasma Torch Melter) for the purpose of reducing the volume of radioactive waste and immobilizing or solidifying radioactive materials. About 1 MW PTM is a treatment technology that operates a plasma torch and puts drum-shaped waste into a melter and radioactive waste in the form of slag is discharged into a waste container. Since only the overflowing slag is discharged from the melter, the discharge is intermittent. Therefore, solidification occurs in the process of discharging the melt. It is difficult to accumulate evenly in the waste container, and there is also an empty space. Solid radioactive waste must be disposed of to meet the acceptance criteria for radioactive waste. Plasma-treated solid waste raised concerns about the requirements. The waste solidification output in a slag container gave us some concerns for the waste package’s solidification and encapsulation requirements. The plasma-treated solid waste process to meet the acceptance criteria will be cost and need time consuming. Thus, a induction heating will be introduced to meet solidification requirements and test criteria of the solidification waste for the waste package disposal.

We developed a 100 kW Class Transferred Type Plasma Torch applicable for melting of noncombustible metal wastes. By employing reverse polarity discharge structures for hollow electrode plasma torch, a transferred type arc plasma was generated stably with long arc length higher than 10 cm at the arc currents of ~400 A and gas (N2) flow rate of ~50 lpm. High arc currents and high arc voltages caused by the increased arc length could input high power level of ~100 kW to the noncombustible metal wastes, enabling quick melting. In addition, relatively long arc length and low gas flow rates can help reduce the deposition of melted materials on the exit surface of the torch. Thanks to these features, the developed plasma torch is expected to be suitable for small-scaled and portable melting system.

Untreated waste is temporarily stored on the site of the nuclear power plant. In some nuclear power plants, saturation period of temporary storage waste is less than 10 years away. As untreated waste continues to be generated in nuclear power plants, it could also affect management of operations. Accordingly, CRI is developing the 3.5 generation plasma torch melting facility for waste treatment. The 3.5th generation plasma torch melting facility consists of melter, plasma torch, waste supply device, exhaust gas treatment facility, power supply, etc. Melter is composed of melting chamber for melting control and pyrolysis chamber for waste pretreatment, and dam-type discharge device is adopted to overflow the melt. Plasma torch is hollow type with reversed discharge, has a rating of megawatt class, and has two gas supply lines. It can be used in transfer mode, non-transfer mode and mixed mode. There are three types of device for waste supply. The first is a drum pusher for injecting 200 L drums, the second is a screw-type waste supply and hopper for injecting solid waste, and the third is a nozzle-type waste supply device for injecting liquid waste. Exhaust gas treatment facility was equipped with post combustion chamber, off-gas cooler, high-temperature filter, HEPA filter, reheater, scrubber, ID fan and etc. Power supply of plasma torch operation is designed with a capacity of 1.5 megawatt (Maximum) and consists of channels A and B. Transfer mode, non-transfer mode and mixing mode of plasma torch may be selected through the control of PLC. This paper introduces the composition and function of the 3.5th generation plasma torch melting facility of CRI. In order to solve the problems arising through the operation of the 3rd generation plasma torch melting facility, an optimization plan is applied.

The liquid radioactive waste system of nuclear power plants treats radioactive contaminated wastes generated during the Anticipated Operational Occurrence (AOO) and normal operation using filters, ion exchange resins, centrifuges, etc. When the contaminated waste liquid is transferred to an ion exchanger filled with cation exchange resin and anion exchange resin, nuclides such as Co and Cs are removed and purified. The lifespan and replacement time of the ion exchange resin are determined by performing a performance test on the sample collected from the rear end of the ion exchanger, and waste ion exchange resin is periodically generated in nuclear power plants. In the general industry, most waste resins at the end of their lifespan are incinerated in accordance with related laws, but waste resins generated from nuclear power plants are disposed of by clearance or stored in a HIC (High Integrity Container). Plasma torch melting technology can reduce the volume of waste by using high-temperature heat (about 1,600 degrees) generated from the torch due to an electric arc phenomenon such as lightning, and secure stability suitable for disposal. Plasma torch melting technology will be used to check thermal decomposition, melting, exhaust gas characteristics, and volume reduction at high temperatures, and to ensure disposal safety. Through this research, it is expected that the stable treatment and disposal of waste resins generated from nuclear power plants will be possible.

Various cutting technologies are being developed for dismantling nuclear power plants. these technologies are including mechanical and thermal methods. For example, mechanical cutting methods include sawing, drilling and milling. But, due to the strength of material, mechanical cutting methods have limits of cutting depth and tool life. Therefore, this milling machine assisted plasma torch was developed to improve the limits. And this machine has the principle of softening effect caused by the high temperature. In this work, this developed device was evaluated in view of the cutting depth and tool life in cutting process. For this process, a plasma torch was attached to the front of the endmill processing path to heat the Inconel 600. As results, compare to conventional milling, when the plasma torch power is 6.4 kW, the cutting depth was increased by 4 mm at condition (feed rate is 100 mm·min−1, tool diameter is 10 mm, rotating speed is 1,000 rpm). And cutting length increase 2 times from 300 mm to 600 mm at 16 mm of tool diameter.

In KHNP CRI, the 100 kW PTM (plasma torch melting) system was designed for the treatment and disposal technology of various radioactive wastes including the metal, concrete, liquid waste and insulator. The facility consists of melting chamber, thermal decomposition chamber, waste feeding system and off-gas treatment system. In this study, to evaluate the applicability of the PTM system, demonstration test was conducted using the radiation hazmat suit as combustible waste. The plasma melting chamber is pre-heated by 2nd combustion device and plasma torch for 5 hours. The temperature inside the plasma melting chamber is approximately 1,600°C. The combustible waste was put into the melting chamber by the pusher feeding device with the throughput of maximum 50 kg/hour. During the test, the power of plasma torch is 60–96 kW on the transferred mod. It was evaluated in terms of long-term integrity of PTM system on operation according to the waste throughput ratio.

Plasma melting technology has been considered as promising technology for treatment of radioactive wastes. According to the IAEA TECDOC-1527 report (2006), the technology has an advantage that it can treat regardless of waste types which is both combustible and non-combustible wastes. In particular, it is expected that a large amount of concrete, a representative non-combustible wastes, will be generated during the operation and dismantling of nuclear power plants. In order to treat the concrete waste in plasma torch melting system, various factors could be considered like the slag of electric conductivity, viscosity and melting temperature. Above all, as a critical factor, the viscosity of the melt is very important to easily discharge the melt. The viscosity of slag (SiO2-CaO-Al2O3 system) can be lowered by adding a basic oxide such as CaO, Na2O, MgO and MnO. The basic oxides are donors of oxygen ions. These oxides are called notwork breakers, because they destroy the network of SiO2 by reacting with it. In this study, the slag composition of the concrete waste was developed to apply the plasma torch melting. Also, demonstration test was performed with the developed slag composition and 100 kW plasma torch melting system.

Currently, KHNP has 24 operating nuclear power plant units with a toal combined capacity of about 23 GWe and two units are under construction. However, permanent stop of Kori unit 1 nuclear power plant was decided in 2017. Accordingly, interest in how to dispose of waste stored inside a permanently stopped nuclear power plant and waste generated as decommissioning process is increasing. KHNP CRI is conducting research on the advancement of plasma torch melting facilities for waste treatment generated during the plant decommissioning and operation period. Plasma torch melting facility is composed of various equipment such as a melting furnace (Melting chamber, Pyrolsis chamber), a torch, an exhaust system facility, a waste supply device, and other equipment. In demonstration test, concrete waste was put in a 200 L drum to check whether it can be pyrolyzed using a plasma torch melting facility. Reproducibility for waste treatment in the form of a 200 L drum and discharge of molten slag could be confirmed, the amount of concrete waste in 200 L Drum that could be treated according to power of plasma torch was confirmed. This demonstration test confirmed the field applicability and stability of plasma torch melting facility, and improved expectations for long-term operation.

In nuclear power plants, insulation is used to protect equipment and block heat. Insulation materials include asbestos, glass fiber, calcium silicate, etc. Various types and materials are used. This study aims to ensure volume reduction and disposal safety by applying plasma torch melting technology to insulation generated at operating and dismantling nuclear power plants. After the evaluation of characteristics by securing thermal insulation materials or similar materials in use at the operational and dismantling nuclear power plant. It is planned to perform pyrolysis and melting tests using the MW plasma torch melting facility owned by KHNP CRI Before the plasma test, check the thermal decomposition and melting characteristics (fluidity, etc.) of the insulation in a 1,600°C high-temperature furnace. The insulation is stored in a 200 L drum and injected into a plasma facility, and the drum and the insulation are to be pyrolyzed and melted by the high temperature inside the plasma torch melting furnace. Through this test, thermal decomposition and melting of the insulation, solidification/ stabilization method, maximum throughput, and exhaust characteristics are confirmed at a high temperature (1,600°C) of the plasma torch. Through this study, it is expected that the stable treatment and disposal of insulation generated from operating and dismantling nuclear power plants will be possible.

Plasma torch melting technology can pyrolyze and melt waste with high-temperature heat (about 1,600°C) using electric arc phenomena such as lightning. Waste that may be treated in a plasma torch melting facility is injected in solid (combustible, non-combustible) and liquid form depending on facility capacity. The 200 L drum type, screw supply type, and nozzle type liquid injection device are applied to MW plasma facilities, and the push rod type and screw supply type are applied to smallcapacity plasma facilities. In consideration of the characteristics of radioactive waste generated from operating and dismantling nuclear power plants, a waste input device suitable for plasma torch facilities was developed and verified through tests. In the future, facility soundness will be confirmed through long-term performance tests, and stability will be secured through continuous improvement.