Aluminium metal matrix composites (AMMCs) are the fastest developing materials for structural applications due to their high specific weight, modulus, resistance to corrosion and wear, and high temperature strength. Carbon nanotubes (CNTs) is known as the material of the twenty-first century for its various applications in structural components for their high specific strength as well as functional materials for their exciting thermal and electrical characteristics. The present study comprise a systematic literature review of Al/CNT nanocomposites fabricated through a solid state friction stir processing. The present review is primarily focussed on the dispersion and survivability of CNTs in the Al matrix because these are the key factors in deciding the mechanical properties of the fabricated composite. Additionally, the formability, weldability and machinability of the FSPed fabricated composites reinforced with CNTs are also summarised here. Based on the detailed literature review, following research gaps are identified which require a critical and more focussed attention of the scientific community working in this research area: (i) the presence of agglomeration or clustering of CNTs in the composite, (ii) survivability and shortening of CNTs during FSP, (iii) interfacial reactions or the formation of reaction products (such as Al4C3) between Al matrix and CNTs, and (iv) the unidirectional alignment of CNTs in the fabricated composite. Important suggestions for further research in effective dispersion of CNTs with its preserved structure by FSP are also provided.

Recent years have witnessed remarkable development in the field of nanotechnology and it has been affirmed that carbonbased nanomaterials have wide applications in agriculture, industrial, biomedical and environmental sectors. Due to distinctive physicochemical properties of the carbon nanotubes (CNTs), they have been extensively utilized in plant science as a growth promoter, and thus, could be a boon for biomass production of agricultural products. Studies suggest that CNTs help increase the plant’s ability to absorb water and essential nutrients, thereby increasing growth. Apart from this, CNTs have been scrutinized for their utilization in genetic engineering for the delivery of genes, proteins or drugs. However, the literature discloses mixed effects of CNTs exposure on plants like in inducing oxidative stress by generating reactive oxygen species (ROS). Moreover, studies concerning CNTs interaction with plant system is at a nascent stage and needs further investigations to explore the mechanisms influencing the growth and toxicity in plants. Therefore, this review attempts to highlight the current literature on CNTs (including both single walled and multi walled) exposure on plants. It also explores unresolved challenges, as well as recommendations to ensure sustainable development of CNTs while minimizing any possible adverse health impacts.

Compared to carbon nanotubes (CNTs), graphene possesses high strength due to wrinkled surface texture caused by a high density of surface defects which benefits more contact with the polymer material than a rolled-up CNT. In the present review, we have discussed and compared the various properties of CNTs (1-D) and graphene (2-D) obtained in experimental results. The effects of covalent and non-covalent functionalization of CNTs and graphene on the properties of its composites have also been reviewed and compared. A comparative analysis has been carried out between CNTs and graphene-reinforced polymer composites. Furthermore, the synergetic effects of CNTs and graphene hybrid nanofiller on the mechanical properties of polymer composites have also been briefly discussed. Finally, this review concludes with the potential application and future challenges are discussed with regards to filler and their polymer composites.

In this study, we report a controlled one-pot green synthesis of multiwalled carbon nanotubes (MWCNTs) via pyrolysis of sustainable agriculture waste (chickpea peel) at 400 °C in aqueous medium. These MWCNTs demonstrated 7.0 nm diameter, 0.28 nm graphitic spacing with carbonyl, hydroxyl, and carboxylic acid functionality. The D band (presence of sp3 defects) and G band ( E2g mode of graphite) at 1350 cm−1 and 1580 cm−1 originated in Raman spectrum, respectively. The prepared MWCNTs showed blue fluorescence with 10% fluorescence quantum yield in aqueous medium. The MWCNTs showed triple exponential decay characteristics with an average fluorescence lifetime of 4.7 ns. The synthesized MWCNTs revealed a consistent fluorescence in the cytoplasm of 22RV1 human prostate carcinoma cell line without exerting any sign of cytotoxicity. The MWCNTs also exhibited remarkable cytocompatibility in human immortalized prostate epithelial RWPE1 cells.

In order to improve the thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites, carbon nanotubes (CNTs) were introduced by electrophoretic deposition. After modification, the flexural strength of the composites increases by 53.0% due to the greatly strengthened interfaces. During thermal shock between 1100 °C and room temperature for 30 times, the strength continues to increase, attributed to the weakened interfaces in favor of fiber and CNT pull-out. By introducing CNTs at interfaces, thermal conductivity of the composites along the fiber axial direction decreases and that along the fiber radial direction increases. As the thermal shock process prolongs, since the carbon structure integrity of CNT and matrix in the modified composites is improved, the conductivity increases whatever the orientation is, until the thermal stress causes too many defects. As for the anti-ablation performance, the mass ablation rates of the CNT-modified composites with fibers parallel to and vertical to the flame decrease by 69.6% and 43.9% respectively, and the difference in the mass ablation rate related with fiber orientations becomes much less. Such performance improvement could be ascribed to the reduced oxidative damage and the enhanced interfaces.

To investigate the effect of gas dispersing carbon nanotubes (CNTs) and hot pressing method on the transparency and the conductivity of thin films, the free arc was used to disperse the CNTs in a high dispersion rate, and the dispersed CNTs were rapidly pressed into the surface of the PET film by hot pressing to obtain electrical conductivity. The relationship between the light transmission and sheet resistance of the film was studied by changing the deposition time and the presence or absence of electrostatic adsorption. It was found that the CNTs modified film still retains good electrical conductivity (sheet resistance up to 6 × 104 Ω, light transmittance 69%) through the cleaning of surfactants and ultrasonic waves, which proves that hot pressing is a simple physical method to achieve effective combination of CNTs and films.

Continuous synthesis of high-crystalline carbon nanotubes (CNTs) is achieved by reconfiguring the injection part in the reactor that is used in the floating catalyst chemical vapor deposition (FC-CVD) process. The degree of gas mixing is divided into three cases by adjusting the configuration of the injection part: Case 1: most-delayed gas mixing (reference experiment), Case 2: earlier gas mixing than Case 1, Case 3: earliest gas mixing. The optimal synthesis condition is obtained using design of experiment (DOE) in the design of Case 1, and then is applied to the other cases to compare the synthesis results. In all cases, the experiments are performed by varying the timing of gas mixing while keeping the synthesis conditions constant. Production rate (Case 1: 0.63 mg/min, Case 2: 0.68 mg/min, Case 3: 1.29 mg/min) and carbon content (Case 1: 39.6 wt%, Case 2: 57.1 wt%, Case 3: 71.6 wt%) increase as the gas-mixing level increases. The amount of by-products decreases stepwise as the gas-mixing level increases. The IG/ID ratio increases by a factor of 7 from 10.3 (Case 1) to 71.7 (Case 3) as the gas-mixing level increases; a high ratio indicates high-crystalline CNTs. The radial breathing mode (RBM) peak of Raman spectrograph is the narrowest and sharpest in Case 3; this result suggests that the diameter of the synthesized CNTs is the most uniform in Case 3. This study demonstrates the importance of configuration of the injection part of the reactor for CNT synthesis using FC-CVD.

Free-standing hybridized electrode consisting of double-walled carbon nanotubes (DWNTs) and activated carbon have been fabricated for flexible supercapacitor applications. The xanthan-gum, used in our methodology, showed high ability in dispersing the strongly bundled DWNTs, and was then effectively converted to activated carbon with large surface area via chemical activation. The homogeneously dispersed DWNTs within xanthan-gum derived activated carbon acted as both electrical path and mechanical support of electrode material. The hybridized film from highly dispersed DWNTs and activated carbon was mechanically strong, has high electrical conductivity, and exhibited high specific capacitance of 141.5 F/g at the current density of 100 mV/s. Our hybridized film is highly promising as electrode material for flexible supercapacitors in wearable device.

In this study, epoxy composites were reinforced with multi-walled carbon nanotubes and fused silica particles, dispersing the fillers within the epoxy resin based on a simple physical method using only shear mixing and ultrasonication. The hybrid composite specimens with 0.6 wt% of carbon nanotubes and 50 wt% of silica particles showed improved mechanical properties, with increase in tensile strength and Young’s modulus up to 12 and 37%, respectively, with respect to those of the baseline specimens. The experimental results showed that the low thermal expansion of the silica particles improved the thermal stability of the composites compared with that of the baseline specimen, whereas the thermal expansion slightly increased, due to the increased heat transfer from the exterior to the interior of specimens by the carbon nanotube filler. The coefficient of thermal expansion of the hybrid composite specimen reinforced with 0.6 wt% of carbon nanotubes and 50 wt% of silica particles was decreased by 25%, and the thermal conductivity was increased by about 84%, compared with those of the baseline specimen.

The composite PAN fibers which incorporated with CNTs and Titania were prepared by mean of wet spinning. These fibers were then pre-oxidized with microwave heating in an air atmosphere. A combination of characterizations was carried out to study the impact of nanoparticles fillers on the properties of as-spun fibers and their performance during the microwave pre-oxidation. The addition of an equal amount of fillers made obvious changes in the chemical and crystalline structure, consequently improves the strength, and this could lower the capability to creep over a wide range of temperatures in the subsequent processes. FTIR and NMR analyses results of the pre-oxidized fibers exhibited clear changes in the PAN structure, where the dehydrogenation reaction and the degree of cyclization were investigated. Additional confirmation of the occurrence of cyclization reaction was achieved by XRD and thermal analysis. According to the TGA results, the pre-oxidized CNT1/ Ti-PAN fibers exhibit greater thermal stability suggesting high carbon content and good quality could result in the dependent carbon fibers.

Multi-walled carbon nanotubes (MWNTs) are suitable for delivering large biomolecules with lower cytotoxicity values and low prime cost. Surface modifications of MWNTs affect interaction with cells and proteins. Oxidation with strong acids decreases cytotoxicity of CNTs and increases protein-loading capacity. Here, after oxidation, TEM images revealed more aligned structure and carboxylated groups at the surface which decreases toxicity. Functionalized MWNTs showed more gradual degradation than the pristine MWNTs and mass loss increased by 2% in the same temperature range. Raman spectroscopy corrected graphitic structure with characteristic D and G bands at 1330 and 1579 cm−1 and increased intensity after oxidation. FTIR spectroscopy peaks at 1443 cm−1, 1560, 1640 cm−1, 2100–2200 cm−1 and 3426 cm−1 are ascribed to C–O–C vibrational stretch, C=C bonds, vibration of C≡C bonds and stretch of hydroxyl groups, respectively. The sonicationdriven dispersion of in phosphate-buffered saline, distilled water and cell culture medium were detected by UV–vis–NIR spectroscopy, water-dispersed functionalized MWNTs revealed the highest absorbance value. Cytotoxicity of MWNTs was investigated before and after functionalization in breast cancer (MDA-MB-231) and human vein endothelial (HUVEC) cells. Relatively low-toxicity results were obtained in functionalized MWNTs and cellular uptake of MWNTs were corrected with fluorescent imaging of cells and cell lysates. Protein-loading capacity of fsMWNTs (functionalized short-length multi-walled carbon nanotubes) was evaluated by using bovine serum albumin (BSA) and with an equal amount of fsMWNTs and BSA; 36% binding yield was obtained. Protein corona after covalent functionalization potentially lowered cytotoxicity up to 6%.

A new discrete bis-dithiolene complex, [ PPh4]2[Zn(DMED)2] (1; DMED = 1,2-dicarbomethoxy-1,2-dithiolate) with sulfurbased radical character was synthesized and structurally characterized. Complex 1 is stable and exhibits a square planar geometry around the zinc metal. 1 forms nanospheres through a one-pot water-induced self-assembly in a mixture of solvents (acetonitrile–water). These nanospheres were further decorated with water-soluble carbon nanotubes (wsCNTs) through hydrogen bonding between the peripheral –COOCH3 groups of 1 and surfacial carboxyl groups of wsCNTs to assemble into a spherical nanocomposite. The as-prepared nanocomposite showed fluorescence emissions in visible region due to the separation of energy states of the nanospheres assisted by wsCNTs, suggesting the future possibilities of these new materials for use in biomedical application.

In this paper, an analytical model is developed for electrical conductivity of nanocomposites, particularly polymer/carbon nanotubes nanocomposites. This model considers the effects of aspect ratio, concentration, waviness, conductivity and percolation threshold of nanoparticles, interphase thickness, wettability between polymer and filler, tunneling distance between nanoparticles and network fraction on the conductivity. The developed model is confirmed by experimental results and parametric studies. The calculations show good agreement with the experimental data of different samples. The concentration and aspect ratio of nanoparticles directly control the conductivity. Moreover, a smaller distance between nanoparticles increases the conductivity based on the tunneling mechanism. A thick interphase also causes an increased conductivity, because the interphase regions participate in the networks and enhance the effectiveness of nanoparticles.

Cross model correlates the dynamic complex viscosity of polymer systems to zero complex viscosity, relaxation time and power-law index. However, this model disregards the growth of complex viscosity in nanocomposites containing filler networks, especially at low frequencies. The current paper develops the Cross model for complex viscosity of nanocomposites by yield stress as a function of the strength and density of networks. The predictions of the developed model are compared to the experimental results of fabricated samples containing poly(lactic acid), poly(ethylene oxide) and carbon nanotubes. The model’s parameters are calculated for the prepared samples, and their variations are explained. Additionally, the significances of all parameters on the complex viscosity are justified to approve the developed model. The developed model successfully estimates the complex viscosity, and the model’s parameters reasonably change for the samples. The stress at transition region between Newtonian and power-law behavior and the power-law index directly affects the complex viscosity. Moreover, the strength and density of networks positively control the yield stress and the complex viscosity of nanocomposites. The developed model can help to optimize the parameters controlling the complex viscosity in polymer nanocomposites.

Carbon nanotubes (CNT) represent one of the most unique materials in the field of nanotechnology. CNT are the allotrope of carbon having sp2 hybridization. CNT are considered to be rolled-up graphene with a nanostructure that can have a length to diameter ratio greater than 1,000,000. CNT can be single-, double-, and multi-walled. CNT have unique mechanical, electrical, and optical properties, all of which have been extensively studied. The novel properties of CNT are their light weight, small size with a high aspect ratio, good tensile strength, and good conducting characteristics, which make them useful for various applications. The present review is focused on the structure, properties, toxicity, synthesis methods, growth mechanism and their applications. Techniques that have been developed to synthesize CNT in sizeable quantities, including arc discharge, laser ablation, chemical vapor deposition, etc., have been explained. The toxic effect of CNT is also presented in a summarized form. Recent CNT applications showing a very promising glimpse into the future of CNT in nanotechnology such as optics, electronics, sensing, mechanical, electrical, storage, and other fields of materials science are presented in the review.

The carboxylated multi-walled carbon nanotubes (MWCNTs–COOH) were used as adsorbent for the separation of flavonoids (naringin and rutin) from bitter orange peel. The influence of the parameters such as, pH values, contact time, and desorption conditions was investigated. The samples were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, derivative thermogravimetric, scanning electron microscopy, UV–Vis spectroscopy, and high-performance liquid chromatography. After separation and desorption process, the eluent was injected for chromatography analysis. Under the optimal conditions, experimental results showed that the extraction efficiency of rutin was higher than naringin and other compounds. Moreover, the desorption percentage of flavonoids was calculated 83.6% after four cycles. This research confirmed that this method for separation of flavonoids is simple and less cost. In addition, the separated flavonoids can be used as antioxidant for the future applications.