This study analyzes the internal temperature characteristics of heater module using a numerical method when the constant heat flux and heat flux time are applied to the surface heating element. The horizontal and vertical dimensions of heater module are 100mm, and the height is 5mm. The heat flux is 10,000W/m2, 15,000W/m2, and 20,000W/m2, and heat flux time is 5 seconds, 10 seconds, 15 seconds, 20 seconds, 30 seconds and 50 seconds, respectively. When the heat flux time was 50 seconds, the temperature of the surface heating element rose to 120.5°C, while the skin epidermis temperature rose 1.7°C. As a result, the surface temperature of the surface heating element increased greatly in the horizontal direction, while it increased low in the depth direction. This is because the heat conduction of the surface heating element is transmitted in the X-Y plane direction, and the thermal conductivity of the pet(polyethylene terephthalate) film and insulation sheet under the surface heating element is very low. when the heat flux at the surface heating element is 20,000W/m2, the skin's epidermal temperature rises up to 0.82℃ compared to 10,000W/m2 and 15,000W/m2.

This study is based on the screen printing method with heat resistant thin film as base material and development for expansion is proceeding. Therefore, it is convenient to be applicable to the installation and it will be possible to reduce the cost compared with the existing construction such as heat trace by 50% or more. As a result, it is possible to develop and commercialize the market for Polar ship, shipbuilding and offshore plants as it is possible to secure CNT(Carbon Nano Tube) based surface heating element and heating paste composition technology as a heating element material at a cryogenic temperature. It is expected that the efficiency will be great when this method is applied to other industries.