검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 7

        1.
        2017.10 구독 인증기관·개인회원 무료
        현재 국내 콘크리트 포장은 고속도로에서 약 40%, 일반 도로에서는 2% 정도를 차지하고 있다. 콘크리트 포장은 중차량에 대한 뛰어난 적용성과 20년 이상의 장기 공용연수를 가진다는 장점을 가지고 있다. 최근 국내 고속도로의 콘크리트는 장기간 사용으로 인해 노후화 되어있으며, 개통한지 오래되지 않은 콘크리트포장에서도 줄눈부 파손 및 표면박리, 표면마모 등으로 인한 보수비가 증가하고 있는 추세이다. 특히 강원 및 전북지역은 매년 겨울 많은 눈으로 인해 많은 양의 제설제를 사용하고 있어 표면박리상태가 심각 상태이다. 따라서 본 논문에서는 실리카퓸과 폴리머분말을 사용한 포장용 콘크리트의 표면박리저항성을 평가하고자 한다. 기배합된 콘크리트에 실리카퓸과 폴리머 분말을 후 첨가하였으며, 혼화재료의 혼입으로 부족한 단위수량은 혼화재료 혼입 시 추가하여 W/C를 42%로 보정해주었다. 표 1은 실험에 사용한 배합표이다. 압축강도 시험결과 재령 28일에 모든 변수에서 30 MPa 이상을 발도를 발현하였고, 실리카퓸 사용량이 증가할수록 강도가 증진되었지만 폴리머에 따른 영향은 거의 없는 것으로 나타났다. 휨강도 시험결과 실리카퓸과 폴리머 분말을 사용한 배합의 휨강도가 OPC 배합에 비해 큰 폭으로 증가하였으며, 폴리머 분말의 혼입량이 증가할수록 그러한 경향이 더 뚜렷하게 나타났다. 실리카퓸도 휨강도가 증가하는 경향을 보였지만 그 영향은 크지 않았다. 표면박리저항성 시험결과 실리카퓸이 혼입된 변수에서 실리카퓸에 의한 수밀성 증가로 인해 저항성이 상당히 증가하는 경향을 보였으며, 혼입률의 증가에 따라 그러한 경향은 더 뚜렷하게 나타났다. 하지만 폴리머 분말의 혼입량이 증가할수록 박리량이 증가하여 폴리머 분말이 표면박리 저항성에 악영향을 미치는 것으로 판단된다.
        2.
        2015.10 구독 인증기관·개인회원 무료
        아스팔트 콘크리트 포장 포토홀은 최근 차량 파손등 운전자의 쾌적한 주행에 악영향을 주고 있다. 포토 홀은 아스팔트 콘크리트 포장의 수분민감저항성이 떨어져 발생하는 파손형태로 국토교통부에서 아스팔트 혼합물의 간정인장강도비를 80% 상향 조정하였으며 80%에 미달하는 아스팔트 혼합물은 박리방지제를 사 용하도록 규정하고 있다. 본 연구에서는 아스팔트 혼합물의 수분민감 저항성을 증가시키기 위하여 박리방지제 사용하였으며, 초 기 박리방지제의 성능검증을 판별하기 위해 보일링(Boiling Water Test, ASTM D 3625-96) 시험을 실 시 하였다. 간접인장강도 시험은 시편을 7.0±0.5% 공극률로 제작하였으며, 습윤(동결융해), 건조 샘플을 나누어 실험을 진행하였고 간접인장강도(Indirect Tensile Strength)를 측정하여 간접인장강도비 (Tensile Strength Ratio)를 산정하였다. 간접인장강도 시험 분석결과 습윤시편과 건조시편의 강도 차이가 무첨가 아스팔트 혼합물에서는 차이 가 분명하게 나타났지만, 액상박리방지제 첨가 시편들에서는 근소하게 나타났다. 간접인장강도비 분석결 과 액상박리방지제 무첨가 시편은 53%, 개발한 액상방리방지제 첨가 시편은 기준치인 80% 이상으로 나 타나 미국의 상용 박리방지재와 별 차이가 없었다.
        3.
        2014.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : The objective of this study is to analyze the performance of anti-stripping agent depending on its type and content to reduce pothole, an increasing pavement distress due to abnormal climate intensity. METHODS : In the past years, U.S and many countries in Europe use hydrated lime and liquid anti-stripping agent in asphalt mixtures. Hydrated lime or liquid anti-stripping agent is substituted for filler and binder, respectively, to improve the anti-stripping property of asphalt mixtures. To investigate this, indirect tensile strength test was performed and TSR values were compared for different content of hydrated lime and types of liquid anti-stripping agent in asphalt mixture. RESULTS : Test results indicate that hydrated lime remarkably increased the asphalt mixture performance on anti-stripping denoted by the increased in TSR values from 55% to 100%. Liquid anti-stripping agent also increased the value of TSR but not significant. In addition, depending on the types of aggregate, TSR values and effect of liquid anti-stripping were different. CONCLUSIONS : Using anti-stripping agents improve the anti-stripping property of asphalt mixture especially hydrated lime; however, more experiments should be conducted to improve the reliability about the effect of liquid anti-stripping agent.
        4,000원
        6.
        2013.10 서비스 종료(열람 제한)
        Domestic expressway are exposed to damage of combined deterioration by excessive use of deicer and a lot of cost is required for maintaining damage structures. Therefore now is the time that durability of subsidiary concrete structures is required to enhanced in order to reduce maintenance cost of structures and to promote road safety. In this study measured scaling resistance of concrete using the 4% CaCl2 used in the ASTM C 672 and 3% NaCl used in the MTO LS-412.
        7.
        2013.04 서비스 종료(열람 제한)
        Domestic expressway are exposed to damage of combined deterioration by excessive use of deicer and a lot of cost is required for maintaining damage structures. Therefore, now is the time that durability of subsidiary concrete structures is required to enhanced in order to reduce maintenance cost of structures and to promote road safety. Thus, in this study measured compression strength and scaling resistance of concrete using the waste glass sludge