UHPFRC 15 M 분절형 박스거더에 대한 비선형 재료 및 비선형 기하학적 유한요소해석을 수행하였다. UHPFRC의 인장 및 압축 영역에서의 구성방정식은 공시체 시험을 기반으로 하였고, 체적 대비 강섬유 혼입률이 각각 1.0%, 1.5% 및 2.0%에 대해 해석을 수행하였다. UHPFRC를 위한 3차원 8 node hexahedron brick model과 1차원 embedded steel element를 기반으로 모델링하였다. UHPFRC 박스거더 단면에서 하부플랜지에 14개, 24개, 32개의 15.2mm 강연선을 모델링하여 실험결과와 비교하였다. 하중과 변위관계, 선형거동에서 비선형거동으로 변하는 시점에서 하중 및 중립축 변화 과정이 실험결과와 비교해 볼 때 정확하게 산출되었다. 따라서, 압축 및 인장구역에서 구성방정식을 반영한 재료적 비선형해석, UHPFRC 분절형 박스의 기하학적 비선형 해석이 유효함을 알 수 있다.

Prestressed concrete (PSC) is a method in which prestressed tendon is placed inside and/or outside the reinforced concrete member and the compressive force applied to the concrete in advance to enhance the engineering properties of concrete member which is weak under tension. In this paper we suggested the precast PSC girder assembled with segments of portable size and weight at the factory. The segments of precast PSC girder will be delivered and assembled as a unit of PSC girder at the site. Consequently, we suggested new-type of precast segmented PSC girder with different shapes of segment cross-section (i.e., I-shape, Box-shape). To mitigate the problems associated with the field splice between the segments of precast PSC girder anchor system is attached near the neutral axis of the girder and relatively uniform compression throughout the girder cross-section is applied. Prior to the experimental investigation, analytical investigation on the structural behavior of precast PSC girder was performed and the serviceability (deflection) and safety (strength) of the girder were confirmed. In addition, 4-point bending test on the girder was conducted to investigate the structural performance under bending. From the experimental investigation, it was found that the precast PSC girder spliced with 3 and 5 segments has sufficient in serviceability and safety conditions and it was also observed that the point where the segments spliced has no defects and the girder behaves as a unit.

After the application of the formuar for the reinforcement index to the behavior of the UHPFRC box girders, reinforcement index does not determine the characteristic of behavior of UHPFRC box girder exactly. So the index should consider the dimension precisely and reference value corresponding to the 0.005 strain of the prestressing strands.

This study shows experimental loading tests on monolithic and spliced hybrid PSC girders with Y-type perfobond rib shear connectors. The main purposes of the study are to investigate the static behaviors of joint parts in the spliced girder and load-resisting capacity of Y-type perfobond rib shear connectors in steel-concrete composite connections. Two specimens (monolithic and spliced girder) with 10.3m length were manufactured and tested. As results of the loading tests, static it is expected that the spliced girder can be utilized effectively in practical design. In addition, Y-type perfobond rib shear connectors can be applied adequately in steel-concrete composite connections.