In General, the surface roughness of turning is depends on cutting condition which are cutting speed, depth of cut, and feed, etc. This study was carried out to presume for mutual relation of turning condition to get optimum surface roughness and experimental equation by variance and multi regression analysis As the result, multiple correlation coefficient was calculated 97%, the coefficient of determination (R2) was calculated 95% and the adjusted coefficient was calculated 97% by multiple regression analysis So, the formula was made by this multiple regression analysis is reliable.

Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.

The purpose of this study is to investigate cutting characteristics and wear behavior in SCM440 steel with different cutting tools, CBN(Cubic Boron Nitride) and coated CBN. During the test coated CBN toolespecially with TiAlN showed better wear resistance behavior than orginal CBN tools. In the interruptedcutting condition, axial groove affected tool surface with impact force during the turning operation. Foradvantageous turning parameter in the interrupted process it is recommendable that lower speed. Also surface roughness showed better behavior in the coated CBN tool conditions than normal CBN conditions. Mainly this is caused by reduced friction between material and tool surface with coated layer.

기계가공은 절삭 부위의 냉각작용과 윤활작용을 위해 절삭유를 많이 소모한다. 절삭유는 염소계의 극압첨가제 등이 함유되어 있어 작업자들에게 유독할 뿐만 아니라 대기의 오염을 초래하여 청정생산을 저해하게 되므로 이런 전통적인 방법은 작업자의 직업병으로부터 보호와 환경보호를 위하여 새로운 가공방법으로 변경되어야만 한다. MQL기계가공 방법은 절삭유를 아주 소량 소모하므로 청정생산을 위한 대안으로 떠오르고 있지만 많은 작업자들이 이에 대한 기술적인 확신이 부족하