It is not easy to predict the shrinkage rate of a plastic injection mold in its design process. The shrinkage rate should be considered as one of the important performances to produce the reliable products. The shrinkage rate can be determined by using the CAE tools in the design produces. However, since the analysis can take minutes to hours, the high computational costs of performing the analysis limit their use in design optimization. Therefore this study was carried out to presume for mutual relation of analysis condition to get the optimum average shrinkage by regression analysis. The results shown that coefficient of determination of regression equation has a fine reliability over 87% and regression equation of average shrinkage is made by regression analysis

본 연구는 국내 7개 회사와 일본과 타이완 기업에서 만들어진 PET POY 사의 습열과 건축수축률을 연구하였다. 이들 사(絲)의 열적수축률들은 hank방법 (KSK 0215)과 Toray FTA-500 장치를 사용하여 측정되었으며 측정된 데이터는 측정방법에 따라 분석되고 토의되어졌다. 준비된 시료는 PET POY 85d/72f와 120d/35f이며 더구나 250d/48f와 155d/50f PET POY가 일본과 국내사 사이의 습열과 건열수축률의 비교를 위해서 역시 준비되어졌다. 그리고 각 시료들의 습열과 건열수축률들은 원사 케이크 내의 사(絲), 50,000m를 1개의 layer로 각각 나누어 각각의 layer 별로 측정되어졌으며 급내와 급간 열수축률이 측정 분석되었으며 국내와 외국 수입사(絲)에 따른 차이를 hank와 Toray 측정방법에 따라 분석하였다.

Plasma polymerization of Perfluoropropene(PFP) was carried out in a tubular type reactor. The Plasma was generated by coupling inductively under the fixed discharge power of 25W and the pressure of 100, 140, and 200 mTorr of radio frequency generator. PFP plasma polymerization thin films were deposited in acrylic yams. For 1 hours, the acrylic yams treated and untreated by PFP plasma were immersed in boiling water. Then the reduction of contraction coefficient of acrylic yams were measured respectively. As a result of this experiment, untreated acrylic yams were reduced around 23%, while treated yams were contracted about 18-2%.