The purpose of this study is to verify how similar the virtual fit pants are to the actual fit of stretchable pants. Data is produced using a virtual model to apply movements. The results show that in the upright position, the similarity between the appearance of the actual fit and the virtual fit is high. Results are 4.47, 4.13 and 4.33 out of 5 on the front, side, and back, respectively. The base line of the front and back, and the amount of allowance in each part were well reproduced by the model. The texture of the virtual fit was evaluated and found to be similar to the actual fabric. In terms of shape and number of wrinkles with the virtual fit pants, large wrinkles were better expressed than fine wrinkles. After applying movements to the virtual model, the front and side results were similar to the actual fit, but the back results were different. As a result of multiple comparisons, the greatest difference in similarity by movements is found in the center front line. The similarity difference was lower on the side than on the front. The only significant difference after applying movements is in the hip circumference margin. According to movements, the similarity of virtual fit is lower on the back than on the front and side, and the back also has the largest similarity differences to the movements type.

We report on stretchable electrochromic films of poly(3-hexylthiophene) (P3HT) fabricated on silver nanowire (AgNW) electrodes. AgNWs electrodes are prepared on polydimethylsiloxane (PDMS) substrates using a spray coater for stretchable electrochromic applications. On top of the AgNW electrode, poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is introduced to ensure a stable resistance over the electrode under broad strain range by effectively suppressing the protrusion of AgNWs from PDMS. This bilayer electrode exhibits a high performance as a stretchable substrate in terms of sheet resistance increment by a factor of 1.6, tensile strain change to 40%, and stretching cycles to 100 cycles. Furthermore, P3HT film spin-coated on the bilayer electrode shows a stable electrochromic coloration within an applied voltage, with a color contrast of 28.6%, response time of 4-5 sec, and a coloration efficiency of 91.0 cm2/C. These findings indicate that AgNWs/PEDOT:PSS bilayer on PDMS substrate electrode is highly suitable for transparent and stretchable electrochromic devices.

본 연구에서는 Tg가 서로 다른 폴리에스테르 바인더로 실버 페이스트를 제조하여 점도 및 점탄성를 측정하였다. 그리고 제조된 실버 페이스트를 스크린인쇄법으로 전극을 인쇄하여 folding 및 stretching test에 따른 전도성 변화 및 전극패턴의 표면형상 변화에 대해서 연구하였다. 그 결과 folding test에서는 Tg가 낮고, 높고와는 관계없이 folding횟수의 증가에 따라서 저항치가 선형적으로 증가됨을 알 수 있었다. 그러나 stretching test결과에서는 Tg에 따른 명확한 특성차이가 나타났다. 즉 신율(elongation)이 증가함에 따라서 높은 Tg을 가진 바인더로 제조된 실버 페이스트의 경우에는 40%이상에는 저항치 측정이 불가능했지만 낮은 Tg로 제조된 것은 80%까지 저항치가 측정되었다. 결론적으로 80%라는 높은 신율을 요구하는 분야에는 낮은 Tg을 가진 바인더를 사용하는 것이 바람직함을 알 수 있었다.

This study is to present a female high school summer blouse with high movement functionality and satisfying appearance. For the experimental research 6 subjects with closest average body shapes and their body surface was measured at beginning and after selecting a representative movement the tested uniform was worn and the appearance and movement functionality was evaluated. The results of this research are as follows. In the research with the aims to improve the sleeve designed the height in 3 types as A.H/4+3, A.H/4+2, A.H/4+1 and their evaluation showed that in the order of best appearance was A.H/4+2, A.H/4+1, A.H/4+3. In the order of best comfort was A.H/4+2, A.H/4+3, A.H/4+1 and the best order for movement functionality was A.H/4+1, A.H/4+2, A.H/4+3. Additional height types designed produced from elastic materials were A.H/4+3, A.H/4+2, A.H/4+1 and the resulting order of appearance was A.H/4+3, A.H/4+2, A.H/4+1, order of comfort was A.H/4+3, A.H/4+2, A.H/4+1 and the order of movement functionality was A.H/4+1, A.H/4+2, A.H/4+3. Integrating these results shows that in using the same concurrent materials, the experiment pattern of setting the sleeve height as A.H/4+2 was the best while in using elastic materials, the experiment pattern of setting the sleeve height as A.H/4+3 was the best.

Three varieties of green pepper - Chungyang pepper, Cucumber-taste pepper and Nokgwang pepper - are competing with one another in consumption due to the overlapping shipment period. The objective of this study is to analyze the influence of monthly variations of shipment quantities on the wholesale market prices. A Linear Approximated Inverse Almost Ideal Demand System (LA/IAIDS) is employed with monthly data set of three different varieties of green pepper consumption. The results show that if there is an excess supply in the market, the rate of the price decline is larger for forcing culture Chungyang pepper than other pepper varieties. On the contrary, change in supply of cucumber-taste pepper and Nokgwang pepper has little effect on the price of Chungyang pepper. The results of this study can be utilized as a basic information for enhancing the farm income and promoting agricultural policies related to the establishment of self-help funds by Chungyang pepper producer groups in Gyeongnam region.