Detection and sizing of defects are very important for structure life management base on fracture mechanics. The non-destructive inspection techniques based on the induced current field measurement are newly developed. This paper describes the results obtained by these techniques for artificial surface defects. In the case of the RICFM technique, the potential drop distribution around a surface defects was measured as a smaller potential drop than that in a place without a defect. This potential drop showed a minimum value at the defect location, and the absolute value of this minimum value increases depending on the depth of the defect. In the case of the FEF technique, the potential difference distribution for surface defects was measured as a maximum at the location of the defect. This maximum value showed a difference depending on the depth of the defect.

급속소결방법인 고주파유도가열 소결법과 펄스전류활성 소결법을 이용하여 습식 볼밀링으로 혼합한 WC-8wt.%Ni분말에 60MPa의 압력과 고주파유도가열장치의 경우 전체 용량 (15kw)의 90%에 해당하는 고주파출력을, 펄스전류활성 소결장치의 경우 2800A의 펄스전류를 가하여 치밀한 소결체를 2분이내의 짧은 시간에 제조하였다. WC 초기입자크기가 증가함에 따라 제조된 소결체의 입자크기와 평균자유행로는 증가하였다. 또한 WC 결정립 크기가 증가함에 따라