간행물
한국분말야금학회 학술대회논문집
- 발행기관 한국분말재료학회(구 한국분말야금학회)
- 자료유형 학술대회
- 간기 부정기
- 수록기간 1993 ~ 2006
- 주제분류 공학 > 금속공학 공학 분류의 다른 간행물
- 십진분류KDC 559DDC 629
권호리스트/논문검색
한국분말야금학회 2006년도 춘계학술대회논문집 (2006년 4월) 443건
1.
2006.04
구독 인증기관·개인회원 무료
2.
2006.04
구독 인증기관·개인회원 무료
3.
2006.04
구독 인증기관·개인회원 무료
An update and the latest results on molten metal atomization using a Pressure-Gas-Atomizer will be given. This atomizer combines a swirl-pressure atomizer, to generate a liquid hollow cone film and a gas atomizer to atomize the film and/or the fragments of the film. The paper is focused on powder production, but this atomization system is also applicable for deposition purposes. Different alloys (Sn, SnCu) were atomized to study the characteristics of the Pressure-Gas-Atomizer.
4.
2006.04
구독 인증기관·개인회원 무료
Based on theoretical analysis, a new general equation of mean particle size applicable to both conventional atomization methods and new atomization processes is presented. In gas atomization, it is equivalent with and can be changed into Lubanska Equation. In centrifugal atomization, it can be changed into the equations that are currently the most widely used. In water atomization, it is similar to the equation proposed by Grandzol and Tallmadge. According to the universal equation, new correlations for mean particle size in novel atomization processes such as Hybrid Atomization and Multistage Atomization were proposed and agreed with our experimental data well.
5.
2006.04
구독 인증기관·개인회원 무료
6.
2006.04
구독 인증기관·개인회원 무료
Hybrid atomization is a new atomization technique that combines gas atomization with centrifugal atomization. This process can produce fine, spherical powders economically with a mean size of about 10 m diameter and a tight size distribution.
7.
2006.04
구독 인증기관·개인회원 무료
The use of hot gas in melt atomization has been widely reported, but little detailed experimental data on its precise effects and no satisfactory theory to explain them have been published. In this paper the authors present experimental data on the atomization of metals with gas at temperatures from ambient to 1000C, a semi-empirical equation relating particle size to gas temperature and flow rate, and an analysis of the gas dynamics of the atomization process that allows some insight into the process.
8.
2006.04
구독 인증기관·개인회원 무료
9.
2006.04
구독 인증기관·개인회원 무료
The spherical and high quality Titanium fine powder "Tilop" has been produced with gas atomization furnace, Sumitomo Titanium Corporation originally designed. Recently, a new process which can produce Ti-alloy(Ti-6Al-4V) powders by utilizing our gas atomization process, of which raw material is sponge titanium pre-mixed with alloy chips or granules has been also developed. The particle size of gas atomized Ti-alloy powder and the mechanical properties of sintered Ti-alloy compacts prepared by metal injection molding were discussed in this study.
10.
2006.04
구독 인증기관·개인회원 무료
In this study, a new laval type nozzle was designed and manufactured. Using this nozzle tin powder was produced in close coupled system by using nitrogen gas at different operating conditions. The results showed that the increasing the gas pressure up to 1.47 MPa reduced the mean powder size down to 11.39 microns with a gas/melt mass flow rate ratio of 2.0. Powders are spherical in shape and have smooth surfaces.
11.
2006.04
구독 인증기관·개인회원 무료
12.
2006.04
구독 인증기관·개인회원 무료
In order to obtain spherical fine powder, we have developed a new method of high-pressure water atomization system using swirl water jet with the swirl angle . The effect of nozzle apex angle upon the morphology of atomized powders was investigated. Molten copper was atomized by this method, with rad (swirl water jet) and rad (conical water jet). It was found that the median diameter of atomized powders decreased with decreasing down to 0.35 rad in each , but under θ<0.35 rad, increased abruptly with decreasing for rad, while it was still decreased with decreasing for rad.
13.
2006.04
구독 인증기관·개인회원 무료
To improve the properties of fine metal powder, such as particle size distribution and geometric standard deviation, this work was done at various atomizing conditions. The new atomization mechanism and the correlation equation were proposed to estimate the mean particle diameter.
14.
2006.04
구독 인증기관·개인회원 무료
15.
2006.04
구독 인증기관·개인회원 무료
Through different projects, CETIM and its scientific and industrial partners have evaluated the potential of the High Velocityy Compaction Technology in terms of materials and component shape. Various kinds of powder materials were studied: metals, ceramics and polymers. The HVC process was used with success to manufacture gears, large parts and multilevel components. Due to the high density of HVC parts, the green machining process enables shapes to be produced that would otherwise be impossible to compact and components to be produced with very hard sintered and homogeneous materials.
16.
2006.04
구독 인증기관·개인회원 무료
17.
2006.04
구독 인증기관·개인회원 무료
18.
2006.04
구독 인증기관·개인회원 무료
High velocity compaction (HVC) is a production technique with capacity to significantly improve the mechanical properties of powder metallurgy (PM) parts. Investigated here are green body data such as density, tensile strength, radial springback, ejection force and surface flatness. Comparisons are performed with conventional compaction using the same pressing conditions. Cylindrical samples of a pre-alloyed water atomized iron powder are used in this experimental investigation. The HVC process in this study resulted in a better compressibility curve and lower ejection force compared to conventional quasi static pressing. Vertical scanning interferometry measurements show that the HVC process gives flatter sample surfaces.
19.
2006.04
구독 인증기관·개인회원 무료
