This study investigates the thermo-mechanical behavior and residual stress characteristics of friction stir welding (FSW) in an aluminum inverter housing using finite element analysis (FEA). FSW experiments were first conducted under various tool rotation and traverse speed conditions, and temperature histories were measured using K-type thermocouples. The optimal process condition was identified through tensile testing, and the heat input was estimated by comparing experimental and numerical results. The estimated heat source was incorporated into a transient thermal elasto-plastic analysis to evaluate deformation and residual stresses in an inverter housing model. The results indicated that residual stress distributions varied depending on the welding start position. In particular, when welding started at P3 (near thick ribs and bosses) residual stresses were reduced by approximately 30% compared to P1, owing to the higher local stiffness and enhanced heat dissipation that mitigated temperature gradients. Conversely, welding initiated at P1, a flat region with insufficient reinforcement, resulted in higher stress concentrations. These findings confirm that the welding start position significantly influences residual stress behavior in inverter housings and provide fundamental insights for developing residual stress control strategies in FSW of large-scale components.

In the seismic design of building structural members, due to the complexity of the placement of PC steels in prestressed concrete members, it is necessary to review and define the definition of member damage in comparison with reinforced concrete members.In this study, the results of past experiments compared with the calculation results by ‘section Analysis Method’, with the aim of reviewing the precision of calculation results when member damage evaluation is performed using the section analysis method. Furthermore, it is also compared with the calculation results by the ‘split Element Method’.In addition, parametric studies were carried out, and the influence of the difference between the amount of PC steels and reinforced bar on the residual strain was examined.

For the rational and economic design of the structural elements of ships which is built using welding, the ultimate strength analyses of the plates having initial imperfections, such as welding residual stresses and strains, are needful. The welding deformation usually relied on approximative equations or based on expert's experience. But in this paper, for the thermal elasto-plastic analysis of plates, the finite element analysis was performed, based on initial strain method. In formulating the incremental analysis, unbalanced force terns were included. In the plastic domain during the incremental process, the 2nd order terns stress increment and yield stress increment were considered, so that time increment could be controlled for a more stable solution. The ultimate strength analysis program of the plates having initial imperfections was made. The ultimate strength analysis was carried out based on the results of the welding deformations of this paper. In the ultimate strength analysis the Rayleigh-Ritz method based on the minimum potential theory was used.