In this study, a method of leakage detection was proposed to locate leak position for a reservoir pipeline valve system using wavelet coherence analysis for an injected pressure wave. An unsteady flow analyzer handled nonlinear valve maneuver and corresponding experimental result were compared. Time series of pressure head were analyzed through wavelet coherence analysis both for no leak and leak conditions. The leak information can be obtained through either time domain reflectometry or the difference in wavelet coherence level, which provide predictions in terms of leak location. The reconstructed pressure signal facilitates the identification of leak presence comparing with existing wavelet coherence analysis.

재래식 해수담수화 수평적 압력용기 설계는 후단에 있는 역삼투막에는 농축수에 의해 수질악화 및 생산수저감 등이 동반된다. 이를 해결하기 위해 본 연구에서는 개념적인 중앙 주입식 압력용기가 생산수 단가에 미치는 영향과 역삼투 공정 설계 시 주요 인자들이 성능에 미치는 영향을 조사를 위해 상업화된 역삼 투 프로그램인 ROSA를 이용하여 분석하였다. 그 결과 중앙 주입식 압력용기를 이용할 경우 총괄적인 회수율과 SEC 측면에서 성능이 저하하지만, 막 모듈 당 생산되는 생산수량이 증가하는 것으로 나타났다. 또한 생산수의 수질개선은 2단 설계의 용량 감소로 인하여 건설비 저감으로 연계되는 것으로 조사되었다. 본 연구는 국토교통부 플랜트연구사업의 연구비지원(과제번호 16IFIP-B089908-03)에 의해 수행되었습니다.

A series of injection and drainage test were conducted on an circular acrylic tube to investigate the pressure generated by the accumulated fill materials inside a circular acrylic tube structure. The acrylic tube was filled by means of gravity filling with a slurry material having an average water content of 700%. The water head during the filling process was 1.8m and the bottom pressure during initial filling was 20.18kPa. The recorded stress at the sides of the acrylic tube was 17.89kPa during the filling process and was reduced to 13.58kPa during the leaving process. Continuous drainage of the acrylic tube has greatly influenced the stresses around the tube structure. As the water is gradually allowed to overflow, the generated pressure at the topmost pressure sensor of the tube was reduced further to 2.17kPa. Eventually, the initially liquid state slurry material transforms into plastic state after water has dissipated and substantial soil particles are deposited in the acrylic tube. The final water content of the deposited silt inside the acrylic tube after the test was 42%. It was found that the state of stresses(geo-static earth pressures) in the acrylic tube was anisotropic rather than isotropic.