1.5 μm-thick copper films deposited on silicon wafers were successfully bonded at 415˚C/25 kN for 40 minutes in a thermo-compression bonding method that did not involve a pre-cleaning or pre-annealing process. The original copper bonding interface disappeared and showed a homogeneous microstructure with few voids at the original bonding interface. Quantitative interfacial adhesion energies were greater than 10.4 J/m2 as measured via a four-point bending test. Post-bonding annealing at a temperature that was less than 300˚C had only a slight effect on the bonding energy, whereas an oxygen environment significantly deteriorated the bonding energy over 400˚C. This was most likely due to the fast growth of brittle interfacial oxides. Therefore, the annealing environment and temperature conditions greatly affect the interfacial bonding energy and reliability in Cu-Cu bonded wafer stacks.