Since the Fukushima nuclear accident in 2011, the development of accident tolerant fuel (ATF) has been actively pursued as an alternative to improve the safety of nuclear power plants. In addition, nuclear power plants containing ATF have recently been included as green energy in the 2022 EU taxonomy bill, receiving a lot of attention. Many countries are considering increasing 235U enrichment from 5 to 10 235U % for higher burnup and long cycle operation with ATF improving safety. To utilize ATF, the applicability of fuel storage systems such as new fuel storage vault, Region 1, and Region 2 must be determined. The purpose of this paper is to confirm the applicability of applying ATF, which is being developed in Korea, to the nuclear fuel storage system of Korean nuclear power plants. The nuclear power plant model used in the analysis is APR-1400, a representative Korean nuclear power plant model, and ATF model used in the analysis is Mo microcell UO2 pellet with CrAl coating, which is being developed in Korea. MCNP 6.2 has been used for multiplication factor calculations, and the TRITON/NEWT and ORIGEN-S modules of the SCALE code have been used for depletion calculations. From the analysis results, solutions and additional analysis would be necessary to satisfy criticality regulatory requirements to utilize ATF with increased enrichment.

The Fukushima-Daiichi accident in 2011 revealed the limitations of Zr-alloys in accident scenarios where severe steam oxidation led to the liberation of heat and hydrogen and the destruction of the reactor core. In response to this accident, there has been a concerted effort by industry, national laboratories, and universities to develop cladding and fuel materials for lightwater reactors (LWRs) that are more accident tolerant. The near-term approach has been to develop coatings for Zr-alloys that would provide additional safety and operational margin by virtue of its excellent corrosion/oxidation resistance at both normal and accident conditions. The designs being considered for implementation by major nuclear fuel suppliers include a thin Cr or a ceramic coating on the conventional LWR fuel cladding. For improved economics, the industries are also considering ATF coated cladding with high enrichment fuel (up to 8%) to achieve high burnup (> 75 GWd/MTU). While the development of ATF concepts (i.e., the front end of the fuel cycle), including coated claddings and doped fuels have progressed at an accelerated pace, relatively less attention has been devoted to the used fuel disposition of ATF fuels (i.e., the backend of the fuel cycle). For accelerated deployment of the ATF designs in the current LWR fleet, it is necessary to investigate technical aspects of the ATF used nuclear fuel (UNF) management in transportation, storage, and disposal. This presentation will provide a brief overview of state-of-the-art ATF developments and list out potential considerations to apply the fuels into back-end fuel cycle. New test plan should be planned to compare the characteristics of current LWR used nuclear fuels with those of the new fuel designs. For example, research focus can be understanding of ATF used fuel particulate size and quantity (at high burnup condition) and mechanical integrity of coated cladding under normal and off-normal conditions during transportation and long-term storage. Finally, the impacts of CRUD on the new fuel cladding, increased container weight, temperature, and radiation level to the back-end fuel cycle activities need to be investigated.

The Fukushima accident in 2011 revealed some major flaws in traditional nuclear fuel materials under accidental conditions. Thus, the focus of research has shifted toward “accident tolerant fuel” (ATF). The aim of this approach is to develop fuel material solutions that lead to improved reactor safety. The application of protective coatings on the surface of nuclear fuel cladding has been proposed as a near-term solution within the ATF framework. Many coating materials are being developed and evaluated. In this article, an overview of different zirconium-based alloys currently in use in the nuclear industry is provided, and their performances in normal and accidental conditions are discussed. Coating materials proposed by different institutions and organizations, their performances under different conditions simulating nuclear reactor environments are reviewed. The strengths and weaknesses of these coatings are highlighted, and the challenges addressed by different studies are summarized, providing a basis for future research. Finally, technologies and methods used to synthesize thin-film coatings are outlined.

사고저항성 핵연료의 일환으로 UO2 입자가 세라믹 셀 벽으로 둘러싸인 미세구조를 갖는 세라믹 미소셀 UO2 소결체를 개발 중이다. 이는 핵분열생성물들을 UO2 펠렛 내에 포집하여 펠렛 외부로의 방출을 저감함으로써 봉내압 상승을 완화하고 응력부식균열 발생률을 낮춘다. 생성량이나 방사능 측면에서 위험한 핵분열생성물 중 하나로 여겨지는 세슘은 세라믹 미소셀 소결체 내에서 셀 물질과 화학반응 하여 포집될 수 있다. 따라서, 세슘 포집능은 해당 화학반응의 열역학적, 속도론적 특성에 의해 결정된다. 역으로, 미소셀 소결체의 조성설계 시 해당 반응에 대한 열역학적 예측이 필수적이다. 본 연구는 세라믹 현재 개발 중인 여러 미소셀 조성(Si-Ti-O, Si-Cr-O, Si-Al-O)에 대해 세슘의 포집능을 평가하는 열역학적 계산을 다룬다. 계 산에 앞서 먼저 HSC Chemistry를 이용해 세슘과 셀 물질의 물리/화학적 상태를 정의한 후, LWR 정상운전 모사환경에서 계 산된 세슘포텐셜(ΔGCs)과 산소포텐셜(ΔG02)에 근거하여 세슘포집 반응성을 평가하였다. 계산 결과에 근거하면, 세슘 포집 반응은 상기 모든 조성에서 자발적일 것으로 예상되며 이로써 조성설계의 근거를 제시함과 동시에 세슘의 포집능을 평가하는 효과적인 방법을 제공한다.