The potential use of cost-effective carbon anodes, as an alternative to expensive platinum, in the reduction of oxides within LiCl-Li2O molten salt at elevated cell potentials presents a promising avenue. However, this elevated potential gives rise to the generation of a complex mixture of anodic gases, including hazardous and corrosive species such as chlorine (Cl2), oxygen (O2), carbon monoxide (CO), and carbon dioxide (CO2). In this study, we investigate the influence of applied potential and salt composition on the composition of the generated gas mixture. Real-time gas analysis was conducted during the TiO reduction reaction in the molten salt at 650°C using a MAX-300-LG gas analyzer. Simultaneously, electronic signals, including current, potential, and salt composition, were monitored throughout the oxide reduction process. Additionally, XRD investigations were performed to verify the crystal structure of the resulting products. This research provides valuable insights into optimizing carbon anode-based reduction processes for improved efficiency and safety.

The objective of this study is the removal of chromium from tannery wastewater by electrosorption on carbon prepared from lignocellulosic natural residue "peach stones' thermally treated. The followed steps for obtaining coal in chronological order were: cleaning, drying, crushing and finally its carbonization at 900°C. The characterization of the carbon material resulted in properties comparable to those of many coals industrially manufactured. The study of the dynamic adsorption of chromium on the obtained material resulted in a low removal rate (33.7%) without applied potential. The application of negative potentials of -0.7 V and -1.4 increases the adsorption of chromium up to 90% and 96% respectively. Whereas a positive potential of +1.4V allows desorption of the contaminant of 138%.