실버 페이스트는 상대적으로 낮은 열처리로 공정이 가능하기 때문에 전자 소자 응용분야에서 유용한 전극 재료이다. 본 연구에서는 은 페이스트 전극에 대기압 플라즈마 제트를 이용하여 전극 표면을 처리 했다. 이 플라즈마 제트는 11.5 kHz 작동 주파수에서 5.5 ~ 6.5 kV의 고전압을 사용하여 아르곤 분 위기에서 생성되었다. 플라즈마 제트는 대기압에서 수행함으로써 인쇄 공정에 더 유용할 수 있다. 플라즈 마 처리시간, 인가된 전압, 가스유량에 따라 전극의 표면은 빠르게 친수성화 되었으며 접촉각의 변화가 관 찰되었다. 또한, 대면적 샘플에서 플라즈마 처리 후 접촉각의 편차가 없었는데, 이는 기판의 크기에 관계없 이 균일한 결과를 얻을 수 있었다는 것을 의미한다. 본 연구의 결과는 대면적 전자소자의 제조 및 향후 응 용 분야에서 적층 구조를 형성하는데 매우 유용할 것으로 기대된다.

Effects of dielectric barrier discharge atmospheric cold plasma (DACP) treatment on the inhibition of Salmonella and the storability of grape tomato were investigated. Grape tomatoes, with or without inoculation with a cocktail of three strains of Salmonella (~8 log CFU/g tomato), were packaged in a polyethylene terephthalate commercial clamshell container and cold plasma-treated at 35 kVat 1.1 kHz for 3 min using an DACP treatment system equipped with a pin-type high-voltage electrode. DACP treatment resulted in ~1 log CFU/tomato reduction of Salmonella, irrespectively of the size of container (316, 595vs. 758 cm3), the number of grape tomatoes in the container (3, 7, vs. 11), and the position of the tomato in the container(P > 0.05).Rolling integrated during treatment significantly increased the Salmonella reduction rates to 3.1±0.3 and 3.3±0.8 log CFU/tomato in the single-layer and double-layer configurations of the tomato samples in the container (992 cm3), respectively. Rolling-adopted DACP initially reduced the number of total mesophilic aerobes and yeast and molds in the double layer configuration of tomato samples by 1.3±0.3 and 1.5±0.2 log CFU/tomato, respectively, without altering the color and firmness of the tomatoes. The growth of Salmonella, total aerobes, and yeast and molds on DACP-treated grape tomatoes was effectively prevented during storage at 10 °C. DACP treatment did not influence the tomato color index (a*/b*), firmness, weight loss, pH, total soluble solid content, and lycopene concentration of grape tomatoes at 10 and 25 °C (P> 0.05). DACP treatment holds promise as a post-packaging process for improving microbial safety against Salmonella and storability of fresh grape tomatoes.

In this work, the effects of atmospheric oxygen plasma treatment of carbon fibers on mechanical interfacial properties of carbon fibers-reinforced epoxy matrix composites was studied. The surface properties of the carbon fibers were determined by acid/base values, Fourier-transform infrared spectrometer (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses. Also, the crack resistance properties of the composites were investigated in critical stress intensity factor (KIC), and critical strain energy release rate mode II (GIIC) measurements. As experimental results, FT-IR of the carbon fibers showed that the carboxyl/ester groups (C=O) at 1632 cm-1 and hydroxyl group (O-H) at 3450 cm-1 were observed for the plasma treated carbon fibers, and the treated carbon fibers had the higher O-H peak intensity than that of the untreated ones. The XPS results also indicated that the O1S/C1S ratio of the carbon fiber surfaces treated by the oxygen plasma led to development of oxygen-containing functional groups. The mechanical interfacial properties of the composites, including KIC (critical stress intensity factor) and GIIC (critical strain energy release rate mode II), were also improved for the oxygen plasma-treated carbon fibersreinforced composites. These results could be explained that the oxygen plasma treatment played an important role to increase interfacial adhesions between carbon fibers and epoxy matrix resins in our composite system.