When manufacturing a square plate with a pinhole, the following conclusions were obtained as a result of analyzing the effect of changes in the size of the grid filling the inside of the plate and the presence or absence of a pinhole on the stress concentration factors. 1. It can be seen that in the case where there is a pinhole, the overall stress concentration factors is twice as high as in the case where there is no pinhole. In addition, in the case where there is no pinhole, it can be seen that the stress concentration factors fluctuates at a certain standard depending on the position of the pinhole and the internal grid, and in the case where there is a pinhole, it decreases at a certain point and then increases again. 2. In the case where there is no pinhole, when the L/H ratio increases from 0.1 to 0.3, the Kt value increases from 1.8 to 2.7, an increase rate of approximately 50%. Similarly, in the case of a pinhole, when the L/H ratio increases from 0.1 to 0.4, the Kt value increases from 2.0 to 3.0, an increase rate of about 50%.

본 논문에서는 굽힘하중이 가해지는 스마트 복합재 적층판의 자유단에서 발생하는 박리응력을 압전 작동기를 이용해서 감소시키는 방법을 응력함수를 이용해 해석하는 방법을 제안하였다. 전기-기계 연성에 의해 나타나는 지배방정식은 최소 보족일의 원리를 이용해 구하였다. 응력상태는 일반적인 고유치 해석과정을 통해 구하였다. 스마트 복합재 적층판의 자유단 박리응력은 압전 작동기를 이용해 감소시킬 수 있었다. cross-ply 복합재 적층판의 박리응력 감소가 angle-ply 복합재 적층판 보다 크게 나타났다.