Water contamination caused by heavy metal pollutants from industrial activities remains a pressing environmental concern. This study reports the development of a novel carbon paste electrode (CPE) modified with ethylenediaminetetraacetic acid (EDTA), polyvinyl alcohol (PVA), and multi-walled carbon nanotubes (MWCNTs) using a mechanochemical method for the electrochemical detection of Cu(II) ions. The modified electrode was thoroughly characterized to evaluate its functional groups, morphology, crystallinity, elemental composition, and electrochemical properties. Electrochemical measurements were performed using cyclic voltammetry (CV) and square-wave anodic stripping voltammetry (SWASV) under optimized conditions in 0.1 M NH₄Cl at pH 5. The EDTA/PVA/MWCNT-CPE exhibited a low detection limit (0.0457 μM), a wide linear range (0.1–2.7 μM), and excellent reproducibility (RSD = 0.51%), repeatability (RSD = 0.43%), and stability (95% retention after six days). Selectivity tests demonstrated high recovery for Cu(II) (99.7%) and Hg(II) (99.89%) with minimal interference. This simple, cost-effective sensor offers high sensitivity and selectivity, making it a promising candidate for Cu(II) detection in environmental monitoring applications.

The central theme of this work is the synthesis of single-walled carbon nanotubes (SWCNTs) through the chemical vapor deposition method (CVD). Single-walled carbon nanotubes are synthesized using catalyst-chemical vapor deposition of acetylene at 750 °C temperature. X-ray diffraction study gives a characteristic peak (002) at 26.55° corresponding to the existence of carbon nanotube confirms that the particles are crystalline in nature and hexagonal phase. An SEM and HRTEM outcome gives surface morphology of SWCNTs. The elemental composition was confirmed by EDAX. The ideal concentration of single-walled carbon nanotubes was used to design a novel electrochemical sensor for determining paracetamol (PA) using cyclic voltammetry. Electrochemical determination of paracetamol is described using a single-walled carbon nanotube modified carbon paste electrode (SWCNT/MCPE). The SWCNT/MCPE was used in this study to detect paracetamol electrochemically at pH 7.2 in a 0.2 M PBS with a scan rate of 50 mV s− 1. A single-walled nanotube modified carbon paste electrode was used to develop a sensitive and selective electrochemical technique for the detection of PA. The SWCNT/MCPE showed excellent electrocatalytic activity towards the oxidation of paracetamol in phosphate buffer solution. Therefore, with increased oxidation currents, the voltammetric responses of paracetamol at the bare carbon paste electrode are organized within cyclic voltammetric peaks.