The acoustic emission (AE) method as a passive non-destructive monitoring technique is proposed for real-time monitoring of mechanical degradation in underground structures, such as deep geological disposal of high-level nuclear waste (HLW). This study investigates the low-frequency characteristics of AE signals emitted during the fracturing of meter-scale concrete specimens; uniaxial compression tests (UCT) in a lab scale and Goodman jack (GJ) tests in a 1.3 m-long concrete block were conducted while acquiring the AE signals using low-frequency AE sensors. The results indicate a sharp increase in AE energy emission at approximately 60% and 80% of the yield stresses in the UCT and GJ tests, respectively. The collected AE signals were primarily found in two frequency bands: the 4-28 kHz range and the 56-80 kHz range. High-frequency AE signals were captured more as the stress increased in the GJ tests, which was in contrast to the UCT tests. Furthermore, the AE signals obtained from the Goodman jack tests tended to lower RA values than the UCT results. This study presents unique experimental data with low-frequency AE sensors under different loading conditions, which provides insights into field-scale AE monitoring practices.

The depth of geological disposal of high-level radioactive waste (HLW) varies from country to country, but it is generally considered below 300 m underground. As one of the reliable methods to understand the geological characteristics of these deep areas, the site investigation through drilling is recommended. This paper deals with multidisciplinary research that evaluates the geological characteristics of the site using deep drilling. The deep drilling is 750 m, which is higher than the planned disposal depth. Prior to drilling, literature and surface geological surveys of the target area were conducted, and during drilling, real-time measurement of excavated information for obtaining drilling information, circulating water management and chemical composition through a closed system were monitored. After drilling, field tests such as geophysical borehole logging, deep groundwater sampling, constant pressure injection test, and hydraulic fracturing test were performed. Analysis of the recovered drilling core from a geological point of view such as age dating, rock formation and structural geological analysis, and from geochemical perspectives such as concentration of major/ minor cationic elements, major anions, and trace elements along with the water quality parameters pH, DO, Ec, Eh, etc., from geothermal perspective such as thermal conductivity and coefficient of thermal expansion, from rock mechanical aspects such as physical and mechanical properties of intact rocks and joints, joint distribution, etc. Deep drilling has been completed with 2 holes for granite and 2 holes for sedimentary rocks, and further drilling for gneiss and sedimentary rocks is in progress.

국내 원자력발전소에서 발생하는 사용후핵연료의 제원 및 방출시점 등 특성과 현재의 고준위 방사성폐기물 기본계획에 근거한 처분시나리오를 도출하여 기존 심층 처분시스템을 바탕으로 처분효율과 경제성을 향상시킨 개선된 처분시스템을 제안 하였다. 이를 위하여 국내 원자력발전소에서 발생하는 사용후핵연료의 길이에 따라 2종류의 처분용기 개념을 도출하고, 사용후핵연료 발생 년도와 현재의 기본계획에 근거한 처분 시나리오 설정에 따른 처분시점에서의 냉각기간을 고려하여 처분 용기내 수용 가능한 붕괴열량을 결정하였다. 그리고 2종류의 처분용기에 대한 처분시스템과 결정된 붕괴열을 바탕으로 열 적 안정성 분석을 통하여 제안된 처분시스템의 설계요건에 대한 적합성 여부를 확인하고, 처분효율을 평가하였다. 개선된 처분시스템은 기존 처분시스템에 비하여 처분면적은 약 20% 감소되고 처분밀도는 약 20% 향상됨을 확인하였고, 처분용기와 완충재 재료도 상당량 절감됨을 확인하였다. 본 연구의 결과는 향후 사용후핵연료 관리정책 수립 및 실제 사업을 위한 처분시스템 설계를 위한 자료로 활용될 수 있다.