To achieve permanent disposal of radioactive waste drums, the radionuclides analysis process is essential. A variety of waste types are generated through the operation of nuclear facilities, with dry active waste (DAW) being the most abundant. To perform radionuclides analysis, sample pretreatment technology is required to transform solid samples into solutions. In this study, we developed a dry ashing-microwave digestion method and secured the reliability of the analysis results through a validity evaluation. Additionally, we conducted a comparative analysis of the radioactivity of 94Nb nuclides with and without the chemical separation process, which reduced the minimum detectable activity (MDA) level by more than 65-fold for a certain sample.

Various dry active wastes (DAWs) have been accumulated in nuclear power plants since the DAWs are mostly combustible. KAERI has developed a thermochemical treatment process for the used decontamination paper as an operational waste to substitute for incineration process and to decontaminate radionuclides from the DAWs. The thermochemical process is composed of thermal decomposition in a closed vessel, chlorination of carbonated DAWs, separation of soluble chlorides captured in water by hydroxide precipitation, and immobilization of the precipitate. This study examined the third and fourth steps in the process to immobilize Co-60 by fabricating a stable wasteform. Precipitation behaviors were investigated in the chloride solution by adding 10 M KOH. It was shown that the precipitates were composed of Mg(OH)2 and Al(OH)3. Then, the glass-ceramic wasteform for the precipitates were produced by adding additive mixtures in which silica and boron oxide were blended with various ratios. The wasteform was evaluated in terms of volume reduction ratio, bulk density, compressive strength, and leachability.

Dry active wastes (DAWs) are combustible waste generated during the operation and decommissioning of nuclear facilities, and are known to be generated in the amount of approximately 10,000 to 40,000 drums (based on 200 L) per unit. It consists of various types of protective clothing, paper, and plastic bags, and is stored in radioactive waste storage facilities. Therefore, reducing the volume of DAWs is an important issue in order to reduce storage costs and utilize the limited space of waste storage facilities. Heat treatment such as incineration can dramatically reduce the volume of waste, but as the waste is thermally decomposed, CO2, a global warming gas, is generated and there is a risk of emissions of harmful gases including radionuclides. Therefore, a heat treatment process that minimizes the generation of CO2 and harmful gases is necessary. One of the alternatives to incineration is to carbonize DAWs, dispose of carbonized materials below the release standard as non-radioactive waste, and selectively separate and stabilize inorganic components, including radionuclides, from carbonized DAWs. In this study, 13 types of DAWs generated from nuclear power plants were selected and their thermal decomposition characteristics were investigated to design a heat treatment process that replaces incineration. As a result of TGA analysis, the temperature at which thermal decomposition of each waste begins is 260-300°C for cotton, 320-330°C for paper, 315-420°C for synthetic fiber, 350°C for latex gloves. The mass of most samples decreased to less than 1 % of the initial weight after heat treatment, and dust suit and latex gloves had residues of 13.83% and 13.71% of the initial mass, respectively. The metal components of the residue produced after heat treatment of the sample were analyzed by EDS. According to the EDS results, cotton contains Ca and Al, paper contains Ca, Al and Si, synthetic fiber contains Ca, Cu and Ti, latex gloves contain Ca and Mg. Additionally, ICP analysis was performed to quantify the inorganic components. These results are expected to be applicable to the processing of DAW generated at nuclear facilities in the future.

Thermal treatment, such as combustion, is the most effective way to solve the spatial problem of radioactive waste disposal. Existing incineration technology has the problem of discharging harmful pollutants (CO2 and dioxin, etc.) into the environment. Therefore, it was evaluate the validity of the thermal treatment process that can reduce the volume of dry active waste (DAW) in an eco-friendly. In addition, the stability of the alternative incineration process under development was evaluated by evaluating the emission of harmful pollutants to the environment during the thermal treatment process. We selected 14 samples identical to those discarded by each nuclear power plant (Kori, Saeul, Wolsong, Hanbit, Hanul). And EA (Elemental Analysis) analysis was performed on each sample. As a result, excluded samples containing wastes containing POPs (Persistent Organic Pollutants) such as PCBs (Polychlorinated Biphenyls), which could generate harmful pollutants during thermal treatment, and halogenated organic wastes such as PVC (Polyvinyl Chloride). In addition, the thermal treatment conditions for the four DAWs were derived by Thermogravimetric Analysis/Differential Thermal Analysis (TG/DTA) analysis. At this time, Py-GC/MS analysis was performed at the temperature at which each waste causes thermal decomposition (cotton is 437°C, paper is 562°C, latex glove is 430°C, plastic bag is 485°C). As a result of analyzing the exhaust gas produced during thermal decomposition, about 77.0% of the cotton was Benzoic acid series, the paper was 41.1% Glucopyranose series, and 15.8% hydroxy acetaldehyde. Latex glove was identified to be 45.9% and 19.2% for Limonene and 2-methyl-1, 3-Butadiene, and for plastic bags, Octacosanol and 2-octyl-1-Dodecanol were 38.8% and 15.2%. In addition, it was confirmed that dioxin and harmful heavy metals, which are discussed as environmental risks, were not detected in all samples.

Dry active wastes (DAWs) are a type of combustible radioactive solid waste, which includes decontamination paper, protective clothing, filters, plastic bags, etc. generated from operating nuclear facilities and decommissioning projects. The volume of DAWs could be increased over time, disadvantage to higher disposal costs and space utilitization of disposal site. Additionally, incineration methods cannot be applied to DAWs, unlike general environmental waste, due to concerns about air pollution and the release of harmful chemicals with radioactive nuclides into the atmosphere. Recently, KAERI developed an alternative thermochemical process for reducing the volume of DAW, which involves a step-wise approach, including carbonization, chlorination, and solidification. The purpose of this process is to selectively separate the radioactive nuclides from carbonized DAWs that are less than clearance criteria, which can be disposed of as non-radioactive waste. In this research, we investigated the thermal decomposition characteristics of DAWs using nonisothermal thermogravimetric analysis, which was performed with different categorized wastes and heating conditions. As a result, the cellulose DAWs such as decontamination paper and cotton were thermally decomposed in three or four-step depending on the heating conditions. On the other hand, the hydrocarbon and rubber DAWs such as plastic bags and latex were thermally decomposed in one or two-step. Therefore, it could be suggested the thermochemical treatment conditions that minimize the decomposition of DAWs by controlling the reaction steps, and we will try to apply these results for cellulose type DAWs such as decontamination paper and cotton, which is generated majorly from the nuclear facilities in the future.

핵종재고량 관리는 처분시설의 안전한 관리를 위해서는 필수적이다. 본 논문에서는 원자력발전소의 잡고체폐기물에 대하 여 기존 발생된 폐기물 자료를 반영한 예측방사능량과 실제 처분시설을 운영하면서 인수되어 처분검사까지 완료된 실제방 사능량을 비교분석하였다. 극저준위방사성폐기물에서는 137CS, 90Sr, 99Tc 그리고 129I 핵종이 예측방사능량보다 실제방사능량 이 높게 평가되었으며, 저준위방사성폐기물에서는 모든 핵종에서 예측방사능량이 실제 방사능량보다 높게 평가되었다. 또 한 척도인자에 의한 예측방사능량의 민감도 분석을 통해 준위별 수량 및 총방사능량의 변화추이를 분석하였다. 향후 중저준 위방사성폐기물 처분시설의 안전한 운영과 Safety Case 구축을 위한 기초자료로 활용될 것으로 판단된다.