To analyze the effect of fire in electric-vehicle battery on concrete cement structure. A scenario evaluation was conducted for fire occurrence due to external influences on lithium battery cells used in electric vehicles. Visual inspection was conducted at each stage of the battery fire, and the fire duration and temperature were measured. The battery temperature rise curve and temperature during fire have been examined previously. The stability of a cement structure was evaluated via X-ray diffraction and SEM analyses of the reaction-product changes with respect to temperature. The battery temperature rise curve shows that the battery begins to change at 200 °C–300 °C. However, the general stage of battery damage cannot be readily confirmed from the literature. The current experiment and literature review indicate that battery fire can cause the fire temperature to increase beyond 1000 °C within a few seconds. The reaction product changes structurally in cement from 300 °C or higher. Many voids are generated owing to the decomposition of Ca(OH)2 and C-S-H gel. The temperature of an electric-vehicle fire increases rapidly to 1000 °C or higher within a few seconds. High temperatures change the reaction products in cement structures, thus creating internal voids and cracks and reducing the stability of the structure; therefore, the appropriate countermeasures must be identified.

PURPOSES : This study is conducted to evaluate the development of materials for extinguishing ESS(Energy Storage System) fires in electric vehicles using industrial byproducts. METHODS : Grout containing an appropriate amount of fly ash, silica fume, blast furnace slag powder, and ferronikel slag, which are industrial byproducts, was prepared. The fluidity, stress, and mechanical properties were evaluated in accordance with standard test methods. RESULTS : The fluidity of the materials used for the evolution of ESS fires differed depending on the material of the industrial byproducts. In the case of blast furnace slag, its fluidity is low owing to viscosity even when it content is high, and the use of ferronikelsrag is shown to be suitable for the evolution of ESS fires in fluidity and curing tests. CONCLUSIONS : Fire-extinguishing materials using industrial byproducts require a long curing time but exhibit the fluidity required for ESS fire extinguishment. In particular, the curing and fluidity of Peronikel slag and fly ash are suitable for ESS fire extinguishing.