In this study, a new method of rapid preparation of carbon nanotube (CNT) solution with highly dispersed morphology by free arc excitation is proposed, which shortens the time of the preparation of CNT solution with low concentration. The principle is that the high-energy flow density heat generated by the free arc makes the vaporizable substance coated on the surface of CNTs vaporize rapidly, and then generates the bulk increasing motion, which makes the CNTs aggregates dispersed, and finally forms the CNTs gas-phase dispersion monomer with high dispersion or the cross-linking morphology of few CNTs. In this paper, the influence of gum Arabic (GA) and deionized water (DI water) contents in CNTs mixed electrode on the dispersion of CNTs in different environments (gas phase and liquid phase) is explored. In the limited case of this work, the dispersion effect is better when the mass ratio of CNTs, GA and DI water is 1:0.04:3.96 in the liquid-phase environment. The preparation method reported in this work is expected to be a rapid way to obtain low-concentration nanodispersion.

To investigate the effect of gas dispersing carbon nanotubes (CNTs) and hot pressing method on the transparency and the conductivity of thin films, the free arc was used to disperse the CNTs in a high dispersion rate, and the dispersed CNTs were rapidly pressed into the surface of the PET film by hot pressing to obtain electrical conductivity. The relationship between the light transmission and sheet resistance of the film was studied by changing the deposition time and the presence or absence of electrostatic adsorption. It was found that the CNTs modified film still retains good electrical conductivity (sheet resistance up to 6 × 104 Ω, light transmittance 69%) through the cleaning of surfactants and ultrasonic waves, which proves that hot pressing is a simple physical method to achieve effective combination of CNTs and films.

Currently, a technique to subdivide the process refining is introduced, can be divided into the steel slag. In this study, Free-CaO in the electric arc furnace slag by the ethylene glycol method for the quantitative analysis for the expansion to proceed with construction materials.

Blast furnace slag is recycled as high value-added material, while steel slag is difficult to recycle or is recycled as low value-added one relatively due to its expansion collapsability. It's property is caused by the high content of Free-CaO and unstable steel oxides. Currently, a technique to subdivide the process refining is introduced, can be divided into the electric furnace steel slag and reducing steel slag. In this study, Free-CaO in the electric arc furnace slag by the ethylene glycol method for the quantitative evaluation for the expansion to proceed with construction materials, electric arc furnace slag oxidation is to use.