Damages by jellyfish are occurring frequently around the world. Among them, accidents caused by jellyfish stings are serious enough to cause death. So we designed a jellyfish blocking net and analyzed its stability to prevent sting caused by jellyfish entering the beach. To this end, the dynamic behavior of the jellyfish blocking net according to the current speed (0.25-1.0 m/s) and the net type (50, 100 and 150 mm) on the upper part of the blocking net was modeled using the mass spring model. As a result of simulations for the model, the horizontal tension (horizontal component of the mooring tension) of the mooring line increased with the decrease in the mesh size on the upper part of the blocking net at all current speeds, but exceeded the holding force at high tides faster than 0.5 m/s and exceeded the holding force at all current speeds at low tide. Therefore, the jellyfish blocking nets showed poor stability overall. The depth of the float line had a little difference according to the upper mesh size and increased lineary proportional to the current speed. However, the float line sank too much to block the incoming jellyfish. These analysis results helped us find ways to improve the stability of the jellyfish blocking net, such as adjusting the length of the mooring line and improving the holding power. Therefore, it is expected that this technology will be applied us various underwater structures to discover the weaknesses of the structures and contribute to increasing the stability in the future.

The worldwide abundance of various jellyfish appears to have increased in coastal ecosystems in recent years. The enormous jellyfish blooms cause a variety of problems for the local ecology, fisheries, and aquatic-sports in coastal locations. In this study, jellyfish sting protection net was installed to ensure the safety and reduction of the inflow into the Haeundae beach. In order to confirm the stability of the protection net, the tension for protection net was measured from variation of current speed. The periods for maximum tension were observed correspond to the periods of maximum current speed. The maximum tension for protection net was measured up to 4,100 kg. From field evaluations, the jellyfish sting protection net has demonstrated to stability from the current and tide in the Haeundae beach.

In order to describe the performance of a wedge type jellyfish excluder device, a series of fishing experiments was carried out in the coastal areas of Yokji Island, southern Korea in 2009, using a trawl net with a cover net. The body size and weight of each individual (fish or jellyfish) caught in the experimental fishing were measured. In the case of giant jellyfish the bell diameter and weight were measured. The catch species was composed of giant jellyfish (Nemopilema nomurai), silver croaker (Pennahia argentata), yellow croaker (Larimichthys polyactics), finespotted flounder (Pleuronichthys cornutus), largehead hairtail (Trichiuruslepturus), melon seed (Psenopsisanomala) and so on. The weight ratio and individual ratio of total fish escaped through the outlet of the excluder device were 0.322 and 0.320, respectively. The weight ratios of giant jellyfish excluded from the trawl net ranged from 0.740 to 0.921 (average 0.852/haul). It means that the wedge type jellyfish excluder device performed well and allowed the most of the giant jellyfish to exclude through the trawl net. The approximately 70% of fish entered in trawl net was caught. The wedge type excluder device needs some improvements to minimize the fish escape from the trawl nets in the future.

The purpose of this study is to develop the jellyfish separator system(JSS) for reducing fishery damage by the increase of jellyfish in the sea area of Korea in summer. First of all, to find the optimum structure of a JSS, six types of JSS in trawl fishery were designed and manufactured, the underwater shape of JSS and the separating process by JSS were observed in the circulating water channel(CWC). And the field experiments were carried out in July and September 2004 in the southern sea of Korea. For the moving path of the jellyfish model in the CWC, in case that the model was larger than the mesh size of the separator net, it was guided toward the lower part of the separator net by the guiding net and discharged through the outlet. In case that the model was smaller than the mesh size of the separator net, some models which passed through the upper part of the guiding net were smaller than the mesh size of the guiding net and discharged through the outlet and most of the model which passed through the lower part of the guiding net moved to the codend passing through the separator net. According to the field experiment result, the optimum tilt angle of separator net was inferred 20˚ that the discharge rate of jellyfish was higher than the other tilt angle of separator net and the optimum structure of JSS was inferred GS type(consists of guiding net and separator net) that the discharge rate of jellyfish was higher than S type(consists of separator net). It was demamded to carry out more study for the countermeasure to reduce loss of fish.