본 연구에서는 Aramid FRP와 모서리보강재로 구속한 엔지니어링플라스틱 보강을 통해 기둥의 횡구속 능력을 증대하여 콘크리트 피복 및 압괴 파괴를 지연시킴으로써 휨 항복 후 연성거동을 유도하여 기존 저층 필로티 건축물의 내진 성능을 확보하는 방법을 제시하고 저층 필로티 건축물의 내진취약요인을 분석하여 필요한 전단보강량을 산정, 제안공법의 목표전단보강을 설정하는 것을 목적으로 한다. 엔지니어링플라스틱을 활용한 기둥의 전단보강형상을 제안하고 필로티 구조의 내진취약요인 보강임계점 예측과 예제모델의 구조해석을 통해 제안공법의 목표전단보강량을 검증하였다. 구조해석 결과, 특별지진하중 적용 시, 휨-축력 내력 초과비율이 타 유형군에 비해 낮은 ST-A1(1축편심)을 기준으로 연면적 750m² 이하와 1축 편심 중심-강심편심율 18%이하에 해당될 경우에는 본 논문에서 제안하는 ‘고성능 복합섬유 패널 전단 보강법’을 적용할 수 있는 경계로 제한하고자 한다.

King Seong carried out the large-scale construction transferring the capital from Wungjin (Gongju) to Sabi (Buyeo) in 538. But because most of the Buyeo area was the low swamp in the time, it needed above all to form a site before transferring the capital. Until recently, in addition to the scientific excavation, the relief excavations for the construction of new building or the formation of road were conducted on many sites in the Buyeo area. As a result, many remains which were formed on the low swamp including the temple site of Neungsan-ri, Dongna Castle, the remains of Ssangbuk-ri (280-5 Bukpo, Hyeonnaedeul) and the remains of Gua-ri were identified. Also in these remains, the various engineering construction methods irrespective of the nature of remains were used for the purpose of the soft ground reinforcement as follows: mattress method of construction, pile designation, stone alignment, filing of decomposed granite soil, culverts and storage tanks. Especially, the mattress method of construction and the pile designation are thought to be the traditional engineering construction method at least in that they are appeared since the Three Han Sates era. And these soft ground construction methods had an effect on the construction of reservoir in Japan at the time. In the future, the construction method for soft ground reinforcement shall be concerned and studied further in the architecture and the civil engineering as well as the archeology.