To develop a high pressure main drive hydraulic cylinder for concrete pumping car, it is essential to accurately predict the internal flow structure of the hydraulic cylinder and ensure structural stability. Therefore, in this study structural and buckling analysis were essentially used for safe design. From analysis results, the maximum equivalent stress occurred when the cylinder thickness was 15 mm and the hydraulic cylinder was deemed to be structurally safe. The buckling analysis of the hydraulic cylinder assembly showed that the critical load factor was from 1.3732 to 12.021 and the critical force factor in the entire area was not observed because the critical load factor was greater than 1. The average flow rate of cylinder was uniformly distributed and the flow rate error for the inlet and outlet port could be found to be approximately identical to that of 2 %.

Sucking spray type liquid dispenser does to ply piston by exclusive use cylinder, did so that dispenser may can do pumping, and control sucking and interception of dispenser by sucking piston and interception node in main cylinder interior and control coating emperor's the spray amount more minutely in main cylinder, various coating emperors of low viscosity so that fixed quantity spray is possible spray type liquid dispenser be. In this paper, spray angle and theoretically cover extent in actuality cover extent is difference, spray form, spray air, spray high, over lap extent according to use usage becomes different and actuality cover extent applies over lap 20[%], and succeed to reduce error of cover extent maximum theoretically with actuality cover extent and got near result in cover extent of 10[%] withins.