This paper develops a flow control block for a hydraulic system of a tunnel boring machine. The flow control block is a necessary component to ensure stability in the operation of the hydraulic system. In order to know the pressure distribution of the flow control block, the flow analysis was performed using the ANSYS-CFX. It was confirmed that the pressure and flow rate were normally supplied to the hydraulic system even if one of the four ports of the flow control block was not operated. In order to evaluate the structural stability of the flow control block, structural analysis was performed using the ANSYS WORKBENCH. As a result, the safety factor of the flow control block is 1.54 and the structural stability is secured.

To develop a high pressure main drive hydraulic cylinder for concrete pumping car, it is essential to accurately predict the internal flow structure of the hydraulic cylinder and ensure structural stability. Therefore, in this study structural and buckling analysis were essentially used for safe design. From analysis results, the maximum equivalent stress occurred when the cylinder thickness was 15 mm and the hydraulic cylinder was deemed to be structurally safe. The buckling analysis of the hydraulic cylinder assembly showed that the critical load factor was from 1.3732 to 12.021 and the critical force factor in the entire area was not observed because the critical load factor was greater than 1. The average flow rate of cylinder was uniformly distributed and the flow rate error for the inlet and outlet port could be found to be approximately identical to that of 2 %.

The mushroom production reached to 1000 billion won in monetary value in Korea. We, however, do not have systematic terminology dictionary published yet. Recently new varieties of medicinal mushrooms in addition to culinary mushrooms are being introduced steadily through out the world. This makes the necessity of coordinated and consistent arrangement of terms involved in culture, cultivation and physiological aspects of mushrooms. Various components in relation to the medicinal and physiological functionality also poses ambiguity in terminology along with the terms used in breeding and genetic researches. Moreover, some of the scientific terms are being used erroneously. In order to help mushroom cultivators, students, and mushroom business personnel in understanding the terms on mushroom science and technology we intended to collect and organize all the terms related to mushroom morphology and cultivation, poison and medicinal functionality, processing and utilization, and so on. Thirteen professionals from each field participated in this project. The fields included here are : 1) Genetics and breeding of mushrooms, 2) Cultivation and physiology of mushrooms, 3) Taxonomy and ecology of mushrooms, 4) Processing and functional components, 5) Blight and insects of mushrooms

국내유통약용버섯의 분류체계를 확립하고 이들 속 및 종간의 유연관계확립을 위하여 계통학적 정보를 지니고 있는 ITS부위의 염기서열을 밝히고 ITS1과 ITS2부위의 다양한 염기서열을 이용하여 분류학적 위치를 확립하였고, 시판 I. obliquus 종의 진위여부와 계통분류학적인 유연관계 확립 및 종 특이적인 유전자 탐침을 개발하였다. 본 연구의 조사결과에 의하면, 약용버섯으로 주로 시판되고 있는 국내유통균주는 총 6개의 속(Phellinus, Inonotus, Sparassis, Fomes, Ganoderma, Hericium)으로 나누어짐을 알 수 있었고 그 중에서 기존에 잘 알려진 상황버섯과 최근 들어 수입양이 급증하고 있는 차가버섯이 대부분을 차지하고 있는 것으로 확인되었다. 본 연구에 사용되어진 일명 차가버섯으로 유통 중인 15개 제품 중 중국에서 수입되어진 59번 균주가 P. pini로 확인되었으며 일본에서 수입되어진 51, 52번 균주가 P. baumii와 P. linteus와 유사종 혹은 동일종으로 확인되었다. 한편 I. rheades(AY237731)와 I. radiatus(AY354217) 및 F. fomentarius(AY354213)는 NCBI 등록 시 문제점이 있는 것으로 사료되며 본 실험에서 조사되어진 30번 균주 F. fomentarius가 정확한 말굽버섯인 것으로 사료된다.

Deacidification of waste cooking oil such as, palm oil or soybean oil, using supercritical carbon dioxide (scCO2) extraction has been widely investigated for reusing waste cooking oil. The deacidification process using scCO2 has been carried out under various experimental conditions temperature range between 40 and 100oC, pressure range between 20 and 35 MPa, CO2 flow rate range between 10 and 40 g/min, and extraction time range from 1 to 7 hours. The purified waste oils were characterized by their acid value and peroxide value measured. The optimized conditions were deduced in this paper at the temperature of 80oC, pressure of 20 MPa, and CO2 flow rate of 40 g/min. At the optimized operating condition the peroxide value was existed between 40 and 100. Also 80% of the purified oil was recovered. The properties of the purified oil were shown as similar to those of the pure oil.

This study was to investigate characteristics of Seoho watershed in Suwon city. BOD5 and SS were selected due to the one of the important factors of the water qualities. Monitoring was conducted monthly for four years during the non-rainfall time. Also, we have been monitored BOD5, CODMn, SS, TN and TP with two times sampling after the rainfalls. The highest concentrations of BOD5 and SS were observed in downstream compare with upstream and midstream during the non-rainfall time. No change was observed in BOD5 and CODMn during the non-rainfall time and after the rainfalls. The monitoring result indicated that the concentration of SS was the highest in downstream after the rainfalls. We have collected the samples two times after the rainfalls. The rainfall intensity in first sampling was two times higher than second sampling. TN and TP concentrations were increased with increasing the rainfall intensity at all stream. The ESB (Ecological Score of Benthic macroinverterbrate community) index was used to evaluate the statement of stream. ESB results were identified that the upstream is protected waters and the down and midstream is reformed waters. EBS analysis results indicated that the Seoho watershed was β-mesosaprobic at all stream.

Enzymatic biodiesel using lipase Novozyme-435 instead of using chemical catalyst was studied in this paper for cost reduction, increase of production efficiency and environment friendly product in this paper. In this paper the standard of biodiesel quality was met by using enzyme. The optimal reaction condition of methanol/waste oil molar ratio was 3, which 1 mol of methanol was injected at initial reaction. Then, each of 1 mol of methanol was injected at 4 hours of interval. Other reaction condition was like as follows : Reaction temperature, reaction time, agitation speed and amount of lipase were 55oC, 24 hours, 400 rpm, and 6wt%, respectively.

This study was to investigate the runoff characteristics of non-point pollutants source at the urban area in Suwon city. The highest T-N and T-P concentration of rainfall runoff observed in agricultural area. In residential area, the highest BOD5 and SS concentration of rainfall runoff was investigated. During rainfall events, the peak concentrations of SS and BOD5 were observed after 1~2 hours of rainfall in urban area. Whereas, the peak concentrations occurred within 1~2 hours after rainfall and then the highest concentrations of SS and BOD5 sharply decreased, showing strong first flush effect in urban area. The EMC results indicated that the highest value of T-N and T-P in agricultural area was observed. While residential area was shown the lowest EMC value as T-N and T-P. Non-point pollutant loads on the land use types in urban area were investigated in the order of residential>industrial>agricultural>highway. BOD5 and SS loads on urban watershed were investigated in the order of Suwon>Hwangguji>Seoho>Wonchunri. Whereas, T-N and T-P loads on urban watershed were investigated in the order of Hwangguji>Suwon>Wonchunri>Seho.