Radioactive source terms are important factor in design, licensing and operation of SMR (Small Modular Reactor). In this study, regulatory requirements and evaluation methodology for normal operation on NuScale SMR, which received standard design certification approval on September 11, 2020 from US NRC, are reviewed. The radioactive waste management system of nuclear power reactor should be designed to limit radionuclide concentration in effluents and keep radioactive effluents at restricted area boundary ALARA according to 10 CFR 20 and 10 CFR 50 Appendix I. Also, in general, the coolant source term to calculate the off-site radiological consequences for normal operation of SMR should be determined by using models and parameters that are consistent with regulatory guide 1.112, NUREG- 0017 and the guidance provided in ANSI/ANS-18.1-1999, and the result should be corrected by reflecting the design characteristics of SMR. The coolant source term of NuScale, unlike the case of large NPPs, cannot rely solely on empirical source term data, because the NuScale source term is based on first principle physics, operational experience from recent industry, and lessons learned from large PWR operation. Fission products in reactor coolant are conservatively calculated using first principle physics in SCALE Code assuming 60 GWD/MTU. The release of fission products from fuel to primary coolant based on industry operational experience is determined as fuel failure fraction of 0.0066% for normal operation source term and 0.066% for design basis source term while coolant source term of large NPP is calculated by using ANSI/ANS-18.1 for normal operation and fuel failure fraction of 1% for design basis source term. Water activation products in reactor coolant are calculated from first principles physics and corrosion activation products are calculated by utilizing current large PWR operating data (ANSI/ANS 18.1- 1999) and adjusted to NuScale plant parameters. Also, because ANSI/ANS 18.1-1999 is not based on first principle physics models for CRUD generation, buildup, transport, plate-out, or solubility, NuScale has incorporated lessons learned by using ERPI’s primary water chemistry and steam generator guidelines to ensure source term is conservative and design of materials used cobalt reduction philosophy to help ensure the coolant source term are conservative. Based on the coolant source term calculated according to the above-described method, the annual releases of radioactive materials in gaseous and liquid effluents from NuScale reactor are evaluated. Currently, Small Modular Reactors such as ARA, SMART 100 are under review for licensing in Korea. This study will be helpful to understand how the reactor coolant system source terms are defined and evaluated for SMR.

In Korea, the NUREG-0017 methodology based on realistic model for reactor coolant concentrations are used to estimate the annual radioactive effluent releases for normal operation of nuclear power plant. The realistic model to estimate the radionuclide concentrations in reactor coolant is formulated as a standard, ANSI/ANS-18.1. This standard has provided a set of the reference radionuclide concentrations and adjustment factors for estimating the radioactivity in the principal fluid systems of target plant. Since ANSI/ANS-18.1 was first published in 1976, it was revised in 1984, 1999, 2016, and most recently in 2020. Therefore, this study analyzed revision history of assessment methodology of radioactive source term of light water reactors, which is ANSI/ANS-18.1. Assessment methodology of radioactive source term given ANSI/ANS-18.1 is by using radionuclide concentrations for reactor coolant and steam generator fluid of the reference plant and adjustment factors, which is modifying radioactive source term according to differences in design parameters between reference plant and target plant. There are three type of reference plant: PWR with u-tube steam generator, PWR with once-through steam generator, and BWR. This study analyzed for PWR with u-tube steam generator. Although the standard was revised, evaluation methodology and formula of adjustment factor have been retained, but some of items have been revised. First revision item is reduction of the number of radionuclides and decrease of radioactive concentration in reactor coolant. In the 1976 version of the standard, there were 71 target radionuclides, but the target nuclides have reduced to 57 in 1984 and 56 after 1999. In the case of radioactive concentration in reactor coolant, as the version of standard was updated, the radioactive concentration of 18 nuclides in 1984, 14 nuclides in 1999, and 25 radionuclides in 2016 was decreased. Most of the radionuclides with decrease radioactivity concentration were fission product, it is resulted from improvement of nuclear fuel performance. Second revision item is change of adjustment factors. After the revision in 2016, the adjustment factors for zinc addition plants using natural or depleted zinc are changed. This study analyzed revision history of evaluation methodology of radioactive source term of light water reactors. Furthermore, result of this study will be contributed to the improvement of understanding of assessment methodology and revision history for the radioactive source term.

현재 전 세계적으로 설계단계에서 부식 생성물과 방사성 핵종의 양을 예측하는 프로그램에 대해서는 개발되거나 개발중인 프로그램이 다양하다. 그러나 원자력 발전소 해체 시 발생하는 방사화 부식생성물의 양을 평가하는 코드에 대한 개발은 이 루어지지 않고 있어 정확한 산정에 어려움이 있다. 원자로 용기, 원자로 구성품 및 인접 구조물에서의 특성 원소의 중성자 조 사로 인한 방사화재고량을 평가하기 위해서는 원자로의 고정된 구조물을 대표하는 모든 영역에서의 평균 중성자속과 구조 물의 물질조성 및 원자로 운전이력 등을 이용하여 평가해야 한다. 본 논문에서는 설계단계에서 사용되는 1차 계통의 부식생 성물과 방사성 핵종의 양을 예측하는 CORA, PACTOLE, CRUDSIM, CREAT 및 ACE 코드를 분석하였다. 향후 연구에서는 제 염해체 폐기물 발생량 평가에 대한 사용가능성과 개선점을 찾아 부식생성물량 산정에 정확성을 높이고자 한다.