Nuclear power generation is expected to be enlarged for domestic electricity supply based on the 10th Basic Plan of Long-Term Electricity Supply and Demand. However, the issues on the disposal of spent nuclear fuel or high-level radioactive waste has not been solved. KBS-3 concept of the deep geological disposal and pyroprocessing has been investigated as options for disposal and treatment way of spent nuclear fuel. In other way, the radionuclide management process with 6 scenarios are devised combining chlorination treatment and alternative disposal methods for the efficient disposal of spent nuclear fuel. Various scenarios will be considered and comprehensively optimized by evaluation on many aspects, such as waste quantity, radiotoxicity, economy and so on. Level 0 to 4 were identified with the specialized nuclide groups: Level 0 (NFBC, Hull), Level 1 (Long-lived, volatile nuclides), Level 2 (High heat emitting nuclides), Level 3 (TRU/RE), Level 4 (U). The 6 options (Op.1 to 6) were proposed with the differences between scenarios, for examples, phase types of wastes, the isolated nuclide groups, chlorination process sequences. Op.1 adopts Level 0 and 1 to separate I, Tc, Se, C, Cs nuclides which are major concerns for long-term disposal through heat treatment. The rest of spent nuclear fuel will be disposed as oxide form itself. Op.2 contains Sr separation process using chlorination by MgCl2 and precipitation by K2CO3to alleviate the burden of heat after heat treatment process. U/TRU/RE will be remained and disposed in oxide form. Op.3 is set to pyroprocessing as reference method, but residual TRU/RE chlroides after electrorefining will be recovered as precipitates by K3PO4. Op.4 introduces NH4Cl to chlorinate TRU/RE from oxides after Op.2 applied and precipitates them. TRU/RE/Sr will be simultaneously chlorinated by NH4Cl without MgCl2 in Op.5. Then, chlorinated Sr and TRU/RE groups will be separated by post-chlorination process for disposal. But, chlorinated Sr and TRU/RE are designed not to be divided in disposal steps in Op.6. In this study, the mass flow analysis of radionuclide management process scenarios with updated process variables are performed. The amount and composition of wastes by types will be addressed in detail.

The radionuclide management process is a conditioning technology to reduce the burden of spent fuel management, and refers to a process that can separate and recover radionuclides having similar properties from spent fuels. In particular, through the radionuclide management process, high heat- emitting, high mobility, and high toxicity radionuclides, which have a significant impact on the performance of disposal system, are separated and managed. The performance of disposal system is closely related to properties (decay heat and radioactivity) of radioactive wastes from the radionuclide management process, and the properties are directly linked to the radionuclide separation ratio that determines the composition of radionuclides in waste flow. The Korea Atomic Energy Research Institute have derived process flow diagrams for six candidates for the radionuclide management process, weighing on feasibility among various process options that can be considered. In addition, the GoldSim model has been established to calculate the mass and properties of waste from each unit process of the radionuclides management process and to observe their time variations. In this study, the candidates for the radionuclide management process are evaluated based on the waste mass and properties by using the GoldSim model, and sensitivity analysis changing the separation ratio are performed. And the effect of changes in the separation ratio for highly sensitive radionuclides on waste management strategy is analyzed. In particular, the separation ratio for high heat-emitting radionuclides determines the period of long-term decay storage.

Korea Atomic Energy Research Institute is developing a radionuclide management processes as a conditioning technology to reduce the burden of spent fuel disposal. The radionuclide management process refers to a process managing radionuclides with similar properties by introducing various technology options that can separate and recover radionuclides from spent fuels. In particular, it is a process aimed at increasing disposal efficiency by managing high-heat, high-mobility, and high-toxic radionuclides that can greatly affect the performance of the disposal system. Since the radionuclide management process seeks to consider various technology options for each unit process, it may have several process flows rather than have a single process flow. Describing the various process flows as a single flow network model is called the superstructure model. In this study, we intend to develop a superstructure model for the radionuclide management process and use it as a model to select the optimal process flow. To find the optimal process flow, an objective function must be defined, and at the fuel cycle system level multiple objectives such as effectiveness (disposal area), safety (explosure dose), and economics (cost) can be considered. Before performing the system-level optimization, it is necessary to select candidates of process flow in consideration of waste properties and process efficiency at the process level. In this study, a sensitivity analysis is conducted to analyze changes in waste properties such as decay heat and radioactivity when the separation ratio varies due to the performance change for each unit process of the radionuclide management process. Through this analysis, it is possible to derive a performance range that can have waste properties suitable for following waste treatment, especially waste form manufacturing. It is also possible to analyze the effect of waste properties that vary according to the performance change on waste storage and management approaches.

Considering the domestic condition with small land area and high population density, it is necessary to develop technology that can reduce the disposal area than the deep geological disposal method. For this, KAERI is developing a nuclide management process that can reduce the environmental burden of spent fuel, and establishing an evaluation model that can evaluate the performance of various process options. It is expected that an optimal option of the nuclide management process can be derived from disposal perspective by applying the evaluation model. The mass flow between processing steps of the radionuclide management process is the basic quantity required to quantify the evaluation criteria. Therefore, we built a generalized block model on GoldSim, which can simulate mass flow of various radionuclide management process options. In addition to the mass flow, this model was established to derive the amount of wastes generated by each processing step, the composition of nuclides, and radiological properties (decay heat, radioactivity, etc.). The mass flow and waste property derived from the models are closely related to the factors that determine the area of disposal concepts. Based on this, a disposal area calculation model was established as a model to evaluate the effectiveness of the radionuclide management process on environmental burden reduction. For verification, three process options, which can manage radionuclides having high decay heat (Cs, Sr) or large volume (U), were selected and evaluated as reference processes. And two disposal options, deep geological disposal and deep borehole disposal concepts were considered to be linked with the processes. As a result, it was confirmed that the disposal area could be reduced in the process separating radionuclides having high decay heat. In the future, other evaluation models for economic viability and safety will be added in the GoldSim model.