Separating nuclides from spent nuclear fuel is crucial to reduce the final disposal area. The use of molten salt offers a potential method for nuclide separation without requiring electricity, similar to the oxide reduction process in pyroprocessing. In this study, a molten salt leaching technique was evaluated for its ability to separate nuclides from simulated oxide fuel in MgCl2 molten salts at 800°C. The simulated oxide fuel contained 2wt% Sr, 3wt% Ba, 2wt% Ce, 3wt% Nd, 3wt% Zr, 2wt% Mo, and 89wt% U. The separation of Sr from the simulated oxide fuel was achieved by loading it into a porous alumina basket and immersing it in the molten salt. The concentration of Sr in the salt was measured using ICP analysis after sampling the salt outside the basket with a dip-stick technique. The separated nuclides were analyzed with ICP-OES up to a duration of 156 hours. The results indicate that Ba and Sr can be successfully separated from the simulated fuel in MgCl2, while Ce, Nd, and U were not effectively separated.

Separation of high heat generating-radioactive isotopes from spent nuclear fuel is an important issue because it can reduce the final disposal area. As one of the technologies that can selectively separate only high heat generating-radioactive isotopes without dissolving spent fuel, the methods using molten salt have recently attracted attention. Although studies on chemical changes of Sr oxides in molten salts have been reported, they have limitation in that alternative oxide reagents rather than oxide fuel were used. In this study, the separation behaviors of Sr from simulated oxide fuel using various molten salts were investigated. A powder type containing 95.7wt% of U and 0.123wt% of Sr was used as the simulated oxide fuel. LiCl, LiCl-CaCl2, MgCl2, LiCl-KCl-MgCl2 and NaCl-MgCl2 were used as molten chloride salts. The separation of Sr from the simulated oxide fuel was conducted by loading it in porous alumina basket and immersing it in a salt. The concentration of Sr in the salt was measured by ICP analysis after sampling the salt outside the basket using dip-stick technique. The separation efficiencies of Sr from simulated oxide fuel using the salts were compared. Furthermore, the causes of their separation efficiency were systematically investigated.

Facing the problem of saturation of spent nuclear fuel (SNF) stored in temporary storage facilities on sites, interest in the treatment of SNF is increasing, and it is recognized as a task that needs to be solved promptly. Although direct disposal is a general method for dealing with SNF, the entire fuel assembly is classified as high-level waste; thus, the burden of disposal is high. In order to minimize the disposal burden with enhancing safety for long term storage, it is necessary to develop SNF treatment technologies and continuous efforts are required from a national policy perspective. The present study focused on minimizing the volume of high level waste from light water reactor fuel by separation of uranium, which accounts for most of SNF. The chlorination characteristics of uranium (U), rare earth (RE) oxides were confirmed through lab-scale experiments, and the possibility of uranium separation from U-RE simulated fuel was evaluated using NH4Cl chlorinating agent. The detailed results will be posted and discussed.