This study is about the control method of smart skin applying SPD(Suspended Particles Display). Smart skin is a self-developed composite window system for the purpose of reducing the cooling load and lighting load. The simulation by TRNSYS18 was modeled in detail based on an actual office located in Jeonju. The previously studied smart skin control method (case1) is a time-dependent control method, and a new control method (case2) was devised based on the data that consideration of daily insolation is important in an actual environment. As a result of simulation by case1, it was found that the amount of cooling energy and lighting energy saved was reduced by 15.1% and 39.2%, respectively, compared to the general model. As a result of the simulation by case2, it was found that the amount of cooling energy and lighting energy saved was reduced to 17.6% and 57.5%, respectively, compared to the general model. Therefore, the newly proposed control method considering the amount of insolation and time was found to be effective in reducing cooling energy and lighting energy.

In this study, a smart skin system that combines SPD (suspended particle display) and LGG (Lighting Guide Glass) and its optimal control method was developed for the purpose of simultaneously reducing the lighting load and cooling load in office buildings. And a demonstration site was built to test the results. The demonstration site was constructed as an experimental group with a smart skin system installed and a control group with a general window system installed. When the cooling energy consumption of the experimental group to which the smart skin system was applied was reduced by about 36.9% compared to the control group, the lighting energy was also reduced by 54.4%.

In this study, an algorithm for control of SPD(Suspended Particles Display) on Smart Skin was proposed. The office with SPD located in Jeonju, Jeollabuk-do was modeled and simulated using TRNSYS18. Through simulation, the energy and lighting consumption of building were analyzed The two kinds of control algorithm(SPD and dimming control method for cool energy and lighting energy saving(CASE 1) and improved control method(CASE 2)) were compared. For this research, Two models(with and without SPD and dimming control) were analyzed by comparing the cooling energy and the light energy consumption was reduced 15.1%, and the lightind energy consumption was reduced by 39.2% more than the model without SPD and dimming control. But, at the improved control method(CASE 2) the cooling energy consumption was reduced of more 2.5% and lighting energy consumptions was reduced of more 18.3% than CASE 1. When using SPD and dimming control, lighting energy consumptions showed more sensitive to solar radiation than cooling energy consumptions. As the improved control method(CASE 2) showed more advantageous saving tate than SPD and dimming control metrhod for cool energy and lighting energy saving(CASE 1), it was found that the improved control method (CASE 2) must be utilized in practice for SPD and dimming control.

In this study, skin permeation enhancement was confirmed by designing it to have a structure and composition similarity to the intercellular lipids that improve miscibility with skin by cross-linked lipids poloxamer. The cross-linked lipids poloxamer was synthesized and analyzed by 1H NMR that structure dose had conjugated pluronic with ceramide3. Active component is released by modification of liquid crystal structure because PPO part, large-scale molecule block of pluronic, has hydrophobic nature at skin temperature of 35℃. Conjugated pluronic with ceramide3 was synthesized using Pluronic F127 and p-NPC (4-nitrophenyl chloroformate) at room temperature yielded 89%. Pluronic(Ceramide 3-conjugated Pluronic) was synthesized by reaction of p-NP-Pluronic with Ceramide3 and DMAP. The yield was 51%. This cross-linked lipids poloxamer was blended and dissolved at isotropic state with skin surface lipids, phospholipid, ceramide, cholesterol and anhydrous additive solvent. Next step was preceded by α-Transition at low temperature for making the structure of Meso-Phase Lamella, and non-hydrous skin analogue liquid crystal using thermo-sensitivity smart sensor, lamellar liquid crystal structure through aging time. For confirmation of conjugation thermo-sensitivity smart sensor and non-hydrous skin analogue liquid crystal, structural observation and stability test were performed using XRD(Xray Diffraction), DSC(Differential Scanning Calorimetry), PM (Polarized Microscope) And C-SEM (Cryo-Scanning Electron Microscope). Thermo-sensitivity observation by Franz cell revealed that synthesized smart sensor shown skin permeation effect over 75% than normal liquid crystal. Furthermore, normal non-hydrous skin analogue liquid crystal that not applied smart sensor shown similar results below 35℃ of skin temperature, but its effects has increased more than 30% above 35℃.