This study demonstrated a rapid and simple method for the determination of seven anions including halides and oxyhalides from the KURT underground water sample by capillary electrophoresis with UV detection. In nuclear waste disposal, some anions such as iodine, selenium, and technetium have been of great concern due to its high mobility and toxicity with a long half-life. It has been needed for a reliable analysis of anionic speciation because the high mobility of anions is easily affected by environmental conditions especially pH and salinity of underground water. Here this project is to develop a fast separation of seven anions including iodide, iodate, and selenite using capillary electrophoresis. The electroosmotic flow (EOF) was suppressed using a poly (ethyleneglycol) -coated capillary (DB-WAX capillary). As a result, anions migrated depending on their mobility under a reverse polarity condition (-15 kV) and the analysis time was within 15 min. UV detection was used at 200 nm. The RSDs for migration time were between 0.7% and 1.3% except for selenite of 5.1%. The RSDs for peak area were obtained between 2.9% and 7.4%. The calibration curves were linear from 10 to 200 mg/L with correlation coefficients greater than 0.9952. The LODs were 7.3, 10.9, 11.3, 12.9, 13.0, 13.9, and 17.4 mg/L for iodide, nitrate, bromide, selenite, bromate, tungstate and iodate. The KURT underground water sample spiked with seven anions at 50 mg/L were analyzed. The recoveries of spiked KURT sample ranged from 93.4% to 99.3%. The proposed method was successfully applied to determine seven anions in underground water sample.

Pacific herring, Clupea pallasii, a keystone species with significant ecological and commercial importance, is declining globally throughout much of its range. While traditional fishing equipment methods remain limited, new sensitive and rapid detection methods should be developed to monitor fisheries resources. To monitor the presence and quantity of C. pallasii from environmental DNA (eDNA) extracted from seawater samples, a pair of primers and a TaqMan® probe specific to this fish based on mitochondrial cytochrome b (COB) sequences were designed for the real-time PCR (qPCR) assay. The combination of our molecular markers showed high specificity in the qPCR assay, which affirmed the success of presenting a positive signal only in the C. pallasii specimens. The markers also showed a high sensitivity for detecting C. pallasii genomic DNA in the range of 1 pg~100 ng rxn-1 and its DNA plasmid containing COB amplicon in the range of 1~100,000 copies rxn-1, which produced linear standard calibration curves (r2=0.99). We performed a qPCR assay for environmental water samples obtained from 29 sampling stations in the southeastern coastal regions of South Korea using molecular markers. The assay successfully detected the C. pallasii eDNA from 14 stations (48.2%), with the highest mean concentration in Jinhae Bay with a value of 76.09±18.39 pg L-1 (246.20±58.58 copies L-1). Our preliminary application of molecular monitoring of C. pallasii will provide essential information for efficient ecological control and management of this valuable fisheries resource.

Recent studies have revealed the poisonous nature of aluminum(III) species to aquatic and terrestrial organisms. Therefore, this investigation aims to develop batch adsorption experiments in the laboratory, aiming to the removal of aluminum(III) from aqueous solutions onto powdered activated carbon (PAC). The latter (which is an effective and inexpensive sorbent) was prepared from olive stones generated as plant wastes and modified with an aqueous modifying oxidizing agent, viz. HNO3. The main parameters (i.e. initial solution pH, sorbent and Al3+ ions concentrations, stirring times and temperature) influencing the sorption process were examined. The results obtained revealed that the sorption of Al3+ ions onto PAC is endothermic in nature and follows first-order kinetics. The adsorption data were well described by the Langmuir, Freundlich and Dubinin-Radushkevich (D-R) adsorption models over the concentration range studied. Under the optimum experimental conditions employed, the removal of ca. 100% Al3+ ions in the concentration range 1.35-2.75 mg·l-1 was attained. Moreover, the procedure was successfully applied to the recovery of aluminum spiked to some environmental water samples with an RSD (%), does not exceed 1.22%.

The purpose of this study is to use micro-organism functions for eco-friendly water-purification according to korea basin area of porous concrete using EM, utilizing bioremediation.