고체전해질은 높은 에너지 밀도와 안전성을 갖춘 차세대 리튬이온전지에 꼭 필요한 핵심 요소다. 이러한 고체전 해질의 제작을 위해서 기존 고체전해질의 낮은 이온전도도와 높은 계면저항 문제를 해결해야 한다. 본 연구에서는 강화된 이 온 전도성과 계면 안정성을 지닌 PVDF-HFP 고분자에 분산된 Li7La3Zr2O12 (LLZO) 나노와이어 복합체를 기반으로 하는 새 로운 전해질(PVDF-HFP/LLZO/SN, PHLS membrane)을 제안한다. PHLS에 용매 열압착(Sovlent heat press, SHP)을 통해 계 면 저항과 내부 공극이 감소된 PHLS-(SHP)는 30°C에서 2.06 × 10-4 S/cm의 높은 이온 전도도, 4.5 V (vs. Li/Li+)의 넓은 전 기화학적 전위 창, 리튬 금속과 전해질 사이의 안정된 계면 안정성을 나타냈다. 0.2 mA/cm2에서 수행된 Li 대칭 셀을 사용한 전기화학적 테스트에서 150 시간 이상 안정성을 유지하는 것으로 확인되었으며, 이는 당사의 복합 기반 고체 전해질을 활용 하여 전기화학적 성능이 향상되었음을 시사한다.

This study investigates the development of risedronate (RSD)-incorporated polycaprolactone (PCL)/chitosan composite films for potential use in drug delivery systems aimed at bone repair. PCL and chitosan were blended in varying ratios (25 %, 50 %, 75 % PCL), and their miscibility, morphology, and hydrophilicity were analyzed. The effects of incorporating RSD at different concentrations (10-7 to 10-4 M) on MG63 preosteoblast cell proliferation and differentiation were also evaluated. The results demonstrated that blending of the hydrophobic PCL with hydrophilic chitosan was challenging, due to poor miscibility and phase separation. Optimal blending conditions and drying temperatures were essential for homogeneous film formation. The incorporation of RSD influenced cellular behavior, with 50 % PCL showing the most effective cell proliferation and moderate hydrophilicity. However, higher RSD concentrations (10-4 M) inhibited proliferation, while lower concentrations (10-7 M) promoted it. RSD also enhanced osteoblast differentiation, as evidenced by increased alkaline phosphatase (ALP) activity, particularly in 75 % PCL films. These findings suggest that adjusting the PCL/chitosan ratio and RSD concentration can optimize drug release and cellular responses, making this composite system a promising candidate for bone tissue engineering applications.

Composite-based piezoelectric devices are extensively studied to develop sustainable power supply and selfpowered devices owing to their excellent mechanical durability and output performance. In this study, we design a leadfree piezoelectric nanocomposite utilizing (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 (BCTZ) nanomaterials for realizing highly flexible energy harvesters. To improve the output performance of the devices, we incorporate porous BCTZ nanowires (NWs) into the nanoparticle (NP)-based piezoelectric nanocomposite. BCTZ NPs and NWs are synthesized through the solidstate reaction and sol-gel-based electrospinning, respectively; subsequently, they are dispersed inside a polyimide matrix. The output performance of the energy harvesters is measured using an optimized measurement system during repetitive mechanical deformation by varying the composition of the NPs and NWs. A nanocomposite-based energy harvester with 4:1 weight ratio generates the maximum open-circuit voltage and short-circuit current of 0.83 V and 0.28 A, respectively. In this study, self-powered devices are constructed with enhanced output performance by using piezoelectric energy harvesting for application in flexible and wearable devices.