사용후핵연료 파이로프로세싱에서는 방사성 희토류 염화물(RECl3)을 함유한 LiCl-KCl 공융염폐기물이 발생되며, 핫셀시설에서 운영을 목적으로 단순한 형태의 공융염폐기물 처리공정을 개발하는 것이 필요하다. 본 연구에서는, LiCl-KCl 공융염폐기물 내 희토류 핵종 분리/고화공정의 단순화를 목적으로 Li2O-Al2O3-SiO2-B2O3계의 무기합성매질을 이용하여 LiCl-KCl 공융 염 내 희토류 핵종(Nd)을 분리한 후 분리생성물을 바로 고화하는 시험을 실시하였다. 공융염 내 희토류 염화물(NdCl3) 대비 0.67의 무게비에 해당하는 무기합성매질의 양으로도 Nd 핵종을 98wt% 이상 분리할 수 있었고, 이 때 얻은 희토류 핵종 포집생성물은 약 50wt% 수준의 희토류 산화물 함량을 보유하고 있었으며, 이 포집생성물을 화학적 내구성이 우수한 단일상의 균질한 유리고화체로 제조할 수 있었다. 이 결과들은 LiCl-KCl 공융염폐기물 내 희토류 핵종의 분리/고화공정을 단순화하기 위한 방안수립에 활용될 수 있을 것이다.

The deformation properties of a TiC-Mo eutectic composite were investigated in a compression test at temperaturesranging from room temperature to 2053K and at strain rates ranging from 3.9×10−5s−1 to 4.9×10−3s−1. It was found that thismaterial shows excellent high-temperature strength as well as appreciable room-temperature toughness, suggesting that thematerial is a good candidate for high-temperature application as a structure material. At a low-temperature, high strength isobserved. The deformation behavior is different among the three temperature ranges tested here, i.e., low, intermediate and high.At an intermediate temperature, no yield drop occurs, and from the beginning the work hardening level is high. At a hightemperature, a yield drop occurs again, after which deformation proceeds with nearly constant stress. The temperature- andyield-stress-dependence of the strain is the strongest in this case among the three temperature ranges. The observed high-temperature deformation behavior suggests that the excellent high-temperature strength is due to the constraining of thedeformation in the Mo phase by the thin TiC components, which is considerably stronger than bulk TiC. It is also concludedthat the appreciable room-temperature toughness is ascribed to the frequent branching of crack paths as well as to the plasticdeformation of the Mo phase.

TiC-TiB2-SiC system was a ternary eutectic, whose eutectic composition was 34TiC-22TiB2-44SiC (mol%). TiC-TiB2-SiC ternary eutectic composite were synthesized by a floating zone method using TiC, TiB2 and SiC powders as starting materials. The TiC-TiB2-SiC eutectic composite showed a lamellar texture. TiC(022), TiB2(010) and SiC(111) of the eutectic composite were perpendicular to the growth direction. TiC-TiB2-SiC ternary eutectic composite had specific relationship among the crystal planes: TiC[011]//TiB2[010]//SiC[112], TiC(200)//TiB2(001)//SiC( 402 ) and TiC( 111 )//TiB2(101 )//SiC( 220 ).