A bond-based peridynamic model has been reported dynamic fracture characteristic of brittle materials through a simple constitutive model. In the model, each bond is assumed to be a simple spring operating independently. As a result, this simple bond interaction modeling restricts the material behavior having a fixed Poisson’s ratio of 1/4 and not being capable of expressing shear deformation. We consider a state-based peridynamics as a generalized peridynamic model. Constitutive models in the state-based peridynamics are corresponding to those in continuum theory. In state-based peridynamics, thus, the response of a material particle depends collectively on deformation of all bonds connected to other particles. So, a state-based peridynamic theory can represent the volume and shear changes of the material. In this paper, the perfect plasticity is considered to express plastic deformation of material by the state-based peridynamic constitutive model with perfect plastic flow rule. The elastic-plastic behavior of the material is verified through the stress-strain curves of the flat plate example. Furthermore, we simulate the high-speed impact on 3D granite model with a nonlocal contact modeling. It is observed that the damage patterns obtained by peridynamics are similar to experimental observations.

25% offset high speed frontal impact is the vehicle will crash left 25%(Quarter of the width of the vehicle). 47.6% of drivers killed in vehicle alone and car to car frontal impact occurred in frontal impact small overlap. Study on the occupant protection performance of 25% offset(small overlap) high speed frontal impact results are as follows. In terms of vehicle occupant protection performance, body structure was excessive intrusion into the passenger room and showed such improvement is needed for the design. This is due to a collision risk with the passenger and the solid body increases the risk of injury, showed that improvement is needed. To strengthen the safety of the future, propose improvements on the evaluation results of a statistical analysis and test of the industry and the policy makers.

본 연구는 등방탄성체에 고속충격하중이 작용하는 경우에 대한 유한요소해석에 관한 것으로 대상구조는 여러 가지 모양의 2차원 평면구조를 택하였다. Galerkin 방법을 이용하여 유한요소 정식화하였으며 직접시간적분법에 의해 수치해를 구하였다. 본 해석에서는 균열이 없는 평판으로 수치해와 이론해를 비교하여 수치해의 신뢰성을 확인하였으며, 0°, 30°, 45°경사 균열이 없는 평판에 적용한 3가지 예를 분석하였다. 수치해석 결과는 이론해의 결과와 상호 잘 일치하였다.

전면재를 알루미나, 후면재를 Kevlar또는 S-2 유리 섬유강화 복합재료로 접합한 이종재료 장갑에 대하여 알루미나의 두께 변화와 복합재료의 적층구조에 따른 고속충격 특성 변화에 대하여 연구하였다. 또한 시험재료의 동적 관통현상을 분석하기 위하여 고속촬영기법이 이용되었다. 시험결과, 전면재인 알루미나는 충격탄자 직경의 80% 상당하는 두께(본 실험에서는 6nm)인 경우 양호한 방탄성능을 보였다. 후면재인 복합재료는 섬유를 alternating 주조로 적층한 경우가 laminar구조로 적층한 것에 비하여 더 우수한 방탄성능을 나타내었다.

To assess the protection performance and the applicability as protective materials of high performance fiber reinforced cementitious composites(HPFRCC), this study performed the impact tests with 40 mm gas-gun propelled projectile crash machine. From this study, it has observed that both high compressive strength of cement matrix and fiber reinforcement are beneficial for the improvement of impact resistance.